Re: bisected pcmcia bug - unable to map card memory on old laptops

From: Piotr Gluszenia Slawinski
Date: Fri Aug 03 2012 - 17:52:57 EST

Next message: Greg KH: "Re: [PATCH v3] printk: add option to print cpu id"
Previous message: Alex Williamson: "Re: oops in pci_acs_path_enabled"
In reply to: Yinghai Lu: "Re: bisected pcmcia bug - unable to map card memory on old laptops"
Next in thread: Yinghai Lu: "Re: bisected pcmcia bug - unable to map card memory on old laptops"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

bug is present in all kernels since late 2.6.36

can you send the boot log with working and not working kernel?
Please make sure you have PCI_DEBUG set in your config.

system is ISA based :) but i've enabled it for sake of clarity.

logs are attached both systems are 3.5 kernel, working is one where i've simply commented out the code preventing low mem allocation in resource.c

btw. note that if i would enable pci support in older kernels
bug would most likely resurface even there.

--<5>Linux version 3.5.0-mini (root@solidstate) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #13 Fri Aug 3 21:32:49 UTC 2012
<6>e820: BIOS-provided physical RAM map:
<6>BIOS-88: [mem 0x0000000000000000-0x000000000009efff] usable
<6>BIOS-88: [mem 0x0000000000100000-0x000000000102ffff] usable
<5>Notice: NX (Execute Disable) protection missing in CPU!
<7>e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
<7>e820: remove [mem 0x000a0000-0x000fffff] usable
<6>e820: last_pfn = 0x1030 max_arch_pfn = 0x100000
<7>initial memory mapped: [mem 0x00000000-0x007fffff]
<7>Base memory trampoline at [c009b000] 9b000 size 16384
<6>init_memory_mapping: [mem 0x00000000-0x0102ffff]
<7> [mem 0x00000000-0x003fffff] page 4k
<7> [mem 0x00400000-0x00ffffff] page 2M
<7> [mem 0x01000000-0x0102ffff] page 4k
<7>kernel direct mapping tables up to 0x102ffff @ [mem 0x007fa000-0x007fffff]
<4>ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)
<5>16MB LOWMEM available.
<6> mapped low ram: 0 - 01030000
<6> low ram: 0 - 01030000
<4>Zone ranges:
<4> DMA [mem 0x00010000-0x00ffffff]
<4> Normal [mem 0x01000000-0x0102ffff]
<4>Movable zone start for each node
<4>Early memory node ranges
<4> node 0: [mem 0x00010000-0x0009efff]
<4> node 0: [mem 0x00100000-0x0102ffff]
<7>On node 0 totalpages: 4031
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 3951 pages, LIFO batch:0
<7> Normal zone: 1 pages used for memmap
<7> Normal zone: 47 pages, LIFO batch:0
<6>PM: Registered nosave memory: 000000000009f000 - 0000000000100000
<6>e820: [mem 0x01030000-0xffffffff] available for PCI devices
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping off. Total pages: 3998
<5>Kernel command line: vga=06 rw resume=/dev/sda1 root=/dev/sda2 rw panic=40
<6>PID hash table entries: 64 (order: -4, 256 bytes)
<6>Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
<5>__ex_table already sorted, skipping sort
<6>Initializing CPU#0
<6>Memory: 12172k/16576k available (2370k kernel code, 3952k reserved, 551k data, 220k init, 0k highmem)
<6>virtual kernel memory layout:
<6> fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB)
<6> vmalloc : 0xc1830000 - 0xfffe1000 ( 999 MB)
<6> lowmem : 0xc0000000 - 0xc1030000 ( 16 MB)
<6> .init : 0xc03db000 - 0xc0412000 ( 220 kB)
<6> .data : 0xc0350982 - 0xc03da7c0 ( 551 kB)
<6> .text : 0xc0100000 - 0xc0350982 (2370 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<6>NR_IRQS:16 nr_irqs:16 16
<7>CPU 0 irqstacks, hard=c0090000 soft=c0092000
<6>Console: colour VGA+ 80x60
<6>console [tty0] enabled
<4>Fast TSC calibration using PIT
<4>Detected 99.950 MHz processor.
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 199.90 BogoMIPS (lpj=999500)
<6>pid_max: default: 4096 minimum: 301
<6>Mount-cache hash table entries: 512
<5>Intel Pentium with F0 0F bug - workaround enabled.
<6>CPU: Intel Pentium 75 - 200 stepping 0c
<6>Performance Events: no PMU driver, software events only.
<6>devtmpfs: initialized
<6>NET: Registered protocol family 16
<3>PCI: Fatal: No config space access function found
<6>bio: create slab <bio-0> at 0
<6>ACPI: Interpreter disabled.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<4>PCI: System does not support PCI
<4>PCI: System does not support PCI
<6>Switching to clocksource pit
<6>pnp: PnP ACPI: disabled
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>TCP: Hash tables configured (established 512 bind 512)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<7>PCI: CLS 0 bytes, default 32
<6>platform rtc_cmos: registered platform RTC device (no PNP device found)
<6>apm: BIOS version 1.1 Flags 0x02 (Driver version 1.16ac)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>Btrfs loaded
<6>io scheduler noop registered (default)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
<6>parport0: irq 7 detected
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is an 8272A
<6>brd: module loaded
<6>loop: module loaded
<6>scsi0 : pata_legacy
<6>ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
<6>ata1.00: ATA-0: TOSHIBA MK1724FCV, R0.15 L, max PIO2
<6>ata1.00: 511936 sectors, multi 0, CHS 842/16/38
<6>ata1.00: configured for PIO
<5>scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1724FC R0.1 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 511936 512-byte logical blocks: (262 MB/249 MiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<6>scsi1 : pata_legacy
<6>ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
<5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>scsi2 : pata_legacy
<6>ata3: PATA max PIO4 cmd 0x1e8 ctl 0x3ee irq 11
<6>Switching to clocksource tsc
<6>scsi3 : pata_legacy
<6>ata4: PATA max PIO4 cmd 0x168 ctl 0x36e irq 10
<6>scsi4 : pata_legacy
<6>ata5: PATA max PIO4 cmd 0x1e0 ctl 0x3e6 irq 8
<6>scsi5 : pata_legacy
<6>ata6: PATA max PIO4 cmd 0x160 ctl 0x366 irq 12
<6>plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
<6>NET3 PLIP version 2.4-parport gniibe@xxxxxxxxx
<6>plip0: Parallel port at 0x378, not using IRQ.
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>Intel ISA PCIC probe:
<6> Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
<6> host opts [0]: none
<6> host opts [1]: none
<6> ISA irqs (scanned) = 3,4,5,7,9,10,11,12,15 status change on irq 15
<6>i8042: PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mousedev: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>TCP: cubic registered
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<7>lib80211_crypt: registered algorithm 'WEP'
<7>lib80211_crypt: registered algorithm 'CCMP'
<7>lib80211_crypt: registered algorithm 'TKIP'
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
<4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
<6>VFS: Mounted root (ext2 filesystem) on device 8:2.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 220k freed
<6>Write protecting the kernel text: 2372k
<6>Write protecting the kernel read-only data: 388k
<5>pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
<6>warning: `init' uses 32-bit capabilities (legacy support in use)
<4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
<4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
<6>Adding 31592k swap on /dev/sda1. Priority:-1 extents:1 across:31592k
<2>EXT2-fs (sda2): error: ext2_lookup: deleted inode referenced: 46240
<2>EXT2-fs (sda2): error: ext2_lookup: deleted inode referenced: 46240
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
<4> excluding 0x1f0-0x1ff 0x378-0x37f
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
<4> excluding 0x3e0-0x407 0x410-0x417 0x420-0x47f 0x4a0-0x4cf 0x4e0-0x4ff
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
<4> excluding 0x820-0x87f 0x8a0-0x8c7 0x8d0-0x8ef
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
<4> excluding 0xc00-0xc7f 0xca0-0xcc7 0xcd0-0xcef
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d2000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c8000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c2000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
<4> excluding 0x1f0-0x1ff 0x378-0x37f
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
<4> excluding 0x3e0-0x407 0x410-0x417 0x420-0x47f 0x4a0-0x4cf 0x4e0-0x4ff
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
<4> excluding 0x820-0x87f 0x8a0-0x8c7 0x8d0-0x8ef
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
<4> excluding 0xc00-0xc7f 0xca0-0xcc7 0xcd0-0xcef
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d2000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c8000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d8000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c2000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0de000-0x0dffff:
<4> clean.
<5>pcmcia_socket pcmcia_socket1: cs: unable to map card memory!
<5>pcmcia_socket pcmcia_socket1: cs: unable to map card memory!
<6>Adding 10236k swap on /dev/zram0. Priority:16385 extents:1 across:10236k SS
<5>Linux version 3.5.0-mini (root@solidstate) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #12 Fri Aug 3 21:28:08 UTC 2012
<6>e820: BIOS-provided physical RAM map:
<6>BIOS-88: [mem 0x0000000000000000-0x000000000009efff] usable
<6>BIOS-88: [mem 0x0000000000100000-0x000000000102ffff] usable
<5>Notice: NX (Execute Disable) protection missing in CPU!
<7>e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
<7>e820: remove [mem 0x000a0000-0x000fffff] usable
<6>e820: last_pfn = 0x1030 max_arch_pfn = 0x100000
<7>initial memory mapped: [mem 0x00000000-0x007fffff]
<7>Base memory trampoline at [c009b000] 9b000 size 16384
<6>init_memory_mapping: [mem 0x00000000-0x0102ffff]
<7> [mem 0x00000000-0x003fffff] page 4k
<7> [mem 0x00400000-0x00ffffff] page 2M
<7> [mem 0x01000000-0x0102ffff] page 4k
<7>kernel direct mapping tables up to 0x102ffff @ [mem 0x007fa000-0x007fffff]
<4>ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)
<5>16MB LOWMEM available.
<6> mapped low ram: 0 - 01030000
<6> low ram: 0 - 01030000
<4>Zone ranges:
<4> DMA [mem 0x00010000-0x00ffffff]
<4> Normal [mem 0x01000000-0x0102ffff]
<4>Movable zone start for each node
<4>Early memory node ranges
<4> node 0: [mem 0x00010000-0x0009efff]
<4> node 0: [mem 0x00100000-0x0102ffff]
<7>On node 0 totalpages: 4031
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 3951 pages, LIFO batch:0
<7> Normal zone: 1 pages used for memmap
<7> Normal zone: 47 pages, LIFO batch:0
<6>PM: Registered nosave memory: 000000000009f000 - 0000000000100000
<6>e820: [mem 0x01030000-0xffffffff] available for PCI devices
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping off. Total pages: 3998
<5>Kernel command line: vga=06 rw resume=/dev/sda1 root=/dev/sda2 rw panic=40
<6>PID hash table entries: 64 (order: -4, 256 bytes)
<6>Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
<5>__ex_table already sorted, skipping sort
<6>Initializing CPU#0
<6>Memory: 12172k/16576k available (2370k kernel code, 3952k reserved, 551k data, 220k init, 0k highmem)
<6>virtual kernel memory layout:
<6> fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB)
<6> vmalloc : 0xc1830000 - 0xfffe1000 ( 999 MB)
<6> lowmem : 0xc0000000 - 0xc1030000 ( 16 MB)
<6> .init : 0xc03db000 - 0xc0412000 ( 220 kB)
<6> .data : 0xc03508c2 - 0xc03da7c0 ( 551 kB)
<6> .text : 0xc0100000 - 0xc03508c2 (2370 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<6>NR_IRQS:16 nr_irqs:16 16
<7>CPU 0 irqstacks, hard=c0090000 soft=c0092000
<6>Console: colour VGA+ 80x60
<6>console [tty0] enabled
<4>Fast TSC calibration using PIT
<4>Detected 99.950 MHz processor.
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 199.90 BogoMIPS (lpj=999500)
<6>pid_max: default: 4096 minimum: 301
<6>Mount-cache hash table entries: 512
<5>Intel Pentium with F0 0F bug - workaround enabled.
<6>CPU: Intel Pentium 75 - 200 stepping 0c
<6>Performance Events: no PMU driver, software events only.
<6>devtmpfs: initialized
<6>NET: Registered protocol family 16
<3>PCI: Fatal: No config space access function found
<6>bio: create slab <bio-0> at 0
<6>ACPI: Interpreter disabled.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<4>PCI: System does not support PCI
<4>PCI: System does not support PCI
<6>Switching to clocksource pit
<6>pnp: PnP ACPI: disabled
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>TCP: Hash tables configured (established 512 bind 512)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<7>PCI: CLS 0 bytes, default 32
<6>platform rtc_cmos: registered platform RTC device (no PNP device found)
<6>apm: BIOS version 1.1 Flags 0x02 (Driver version 1.16ac)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>Btrfs loaded
<6>io scheduler noop registered (default)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
<6>parport0: irq 7 detected
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is an 8272A
<6>brd: module loaded
<6>loop: module loaded
<6>scsi0 : pata_legacy
<6>ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
<6>ata1.00: ATA-0: TOSHIBA MK1724FCV, R0.15 L, max PIO2
<6>ata1.00: 511936 sectors, multi 0, CHS 842/16/38
<6>ata1.00: configured for PIO
<5>scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1724FC R0.1 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 511936 512-byte logical blocks: (262 MB/249 MiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<6>scsi1 : pata_legacy
<6>ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
<5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>scsi2 : pata_legacy
<6>ata3: PATA max PIO4 cmd 0x1e8 ctl 0x3ee irq 11
<6>Switching to clocksource tsc
<6>scsi3 : pata_legacy
<6>ata4: PATA max PIO4 cmd 0x168 ctl 0x36e irq 10
<6>scsi4 : pata_legacy
<6>ata5: PATA max PIO4 cmd 0x1e0 ctl 0x3e6 irq 8
<6>scsi5 : pata_legacy
<6>ata6: PATA max PIO4 cmd 0x160 ctl 0x366 irq 12
<6>plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
<6>NET3 PLIP version 2.4-parport gniibe@xxxxxxxxx
<6>plip0: Parallel port at 0x378, not using IRQ.
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>Intel ISA PCIC probe:
<6> Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
<6> host opts [0]: none
<6> host opts [1]: none
<6> ISA irqs (scanned) = 3,4,5,7,9,10,11,12,15 status change on irq 15
<6>i8042: PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mousedev: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>TCP: cubic registered
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<7>lib80211_crypt: registered algorithm 'WEP'
<7>lib80211_crypt: registered algorithm 'CCMP'
<7>lib80211_crypt: registered algorithm 'TKIP'
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
<4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
<6>VFS: Mounted root (ext2 filesystem) on device 8:2.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 220k freed
<6>Write protecting the kernel text: 2372k
<6>Write protecting the kernel read-only data: 388k
<5>pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
<6>warning: `init' uses 32-bit capabilities (legacy support in use)
<4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
<4>EXT2-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
<6>Adding 31592k swap on /dev/sda1. Priority:-1 extents:1 across:31592k
<2>EXT2-fs (sda2): error: ext2_lookup: deleted inode referenced: 46240
<2>EXT2-fs (sda2): error: ext2_lookup: deleted inode referenced: 46240
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
<4> excluding 0x1f0-0x1ff 0x378-0x37f
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
<4> excluding 0x3e0-0x407 0x410-0x417 0x420-0x47f 0x4a0-0x4cf 0x4e0-0x4ff
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
<4> excluding 0x820-0x87f 0x8a0-0x8c7 0x8d0-0x8ef
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
<4> excluding 0xc00-0xc6f 0xca0-0xcc7 0xcd0-0xcef
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d2000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c8000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c2000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
<4> excluding 0x1f0-0x1ff 0x378-0x37f
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
<4> excluding 0x3e0-0x407 0x410-0x417 0x420-0x47f 0x4a0-0x4cf 0x4e0-0x4ff
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
<4> excluding 0x820-0x87f 0x8a0-0x8c7 0x8d0-0x8ef
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
<4> excluding 0xc00-0xc7f 0xca0-0xcc7 0xcd0-0xcef
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d2000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c8000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d8000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c2000-0x0cffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff:
<4> clean.
<6>pcmcia_socket pcmcia_socket1: cs: memory probe 0x0de000-0x0dffff:
<4> clean.
<5>pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 3)
<6>pcnet_cs 1.0: eth0: NE2000 Compatible:
<4>io 0x300, irq 3, hw_addr 00:80:c8:81:32:c4
<6>Adding 10236k swap on /dev/zram0. Priority:16385 extents:1 across:10236k SS
<6>dmesg[1735]: segfault at 807abd0 ip 0806551f sp bfb7b154 error 6

Next message: Greg KH: "Re: [PATCH v3] printk: add option to print cpu id"
Previous message: Alex Williamson: "Re: oops in pci_acs_path_enabled"
In reply to: Yinghai Lu: "Re: bisected pcmcia bug - unable to map card memory on old laptops"
Next in thread: Yinghai Lu: "Re: bisected pcmcia bug - unable to map card memory on old laptops"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]