[PATCH 30/41] TTY: moxa, convert to dynamic device

[Jiri Slaby]

This allows us to provide the tty layer with information about
tty_port for each link.

We also provide a tty_port for the service port. For this one we allow
only ioctl, so this is pretty ugly.

Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
 drivers/tty/moxa.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 89cc934..9dffc72 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -169,6 +169,7 @@ static DEFINE_SPINLOCK(moxa_lock);
 static unsigned long baseaddr[MAX_BOARDS];
 static unsigned int type[MAX_BOARDS];
 static unsigned int numports[MAX_BOARDS];
+static struct tty_port moxa_service_port;
 
 MODULE_AUTHOR("William Chen");
 MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
@@ -834,7 +835,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
 	const struct firmware *fw;
 	const char *file;
 	struct moxa_port *p;
-	unsigned int i;
+	unsigned int i, first_idx;
 	int ret;
 
 	brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
@@ -887,6 +888,11 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
 		mod_timer(&moxaTimer, jiffies + HZ / 50);
 	spin_unlock_bh(&moxa_lock);
 
+	first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+	for (i = 0; i < brd->numPorts; i++)
+		tty_port_register_device(&brd->ports[i].port, moxaDriver,
+				first_idx + i, dev);
+
 	return 0;
 err_free:
 	kfree(brd->ports);
@@ -896,7 +902,7 @@ err:
 
 static void moxa_board_deinit(struct moxa_board_conf *brd)
 {
-	unsigned int a, opened;
+	unsigned int a, opened, first_idx;
 
 	mutex_lock(&moxa_openlock);
 	spin_lock_bh(&moxa_lock);
@@ -925,6 +931,10 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
 		mutex_lock(&moxa_openlock);
 	}
 
+	first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+	for (a = 0; a < brd->numPorts; a++)
+		tty_unregister_device(moxaDriver, first_idx + a);
+
 	iounmap(brd->basemem);
 	brd->basemem = NULL;
 	kfree(brd->ports);
@@ -1031,7 +1041,12 @@ static int __init moxa_init(void)
 
 	printk(KERN_INFO "MOXA Intellio family driver version %s\n",
 			MOXA_VERSION);
-	moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
+
+	tty_port_init(&moxa_service_port);
+
+	moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
+			TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
 	if (!moxaDriver)
 		return -ENOMEM;
 
@@ -1044,8 +1059,9 @@ static int __init moxa_init(void)
 	moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
 	moxaDriver->init_termios.c_ispeed = 9600;
 	moxaDriver->init_termios.c_ospeed = 9600;
-	moxaDriver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(moxaDriver, &moxa_ops);
+	/* Having one more port only for ioctls is ugly */
+	tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
 
 	if (tty_register_driver(moxaDriver)) {
 		printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
-- 
1.7.10.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/