[PATCH V2 3/3] regulator: add MAX8907 driver
From: Stephen Warren
Date: Wed Aug 08 2012 - 17:19:27 EST
From: Gyungoh Yoo <jack.yoo@xxxxxxxxxxxx>
The MAX8907 is an I2C-based power-management IC containing voltage
regulators, a reset controller, a real-time clock, and a touch-screen
controller.
The original driver was written by:
* Gyungoh Yoo <jack.yoo@xxxxxxxxxxxx>
Various fixes and enhancements by:
* Jin Park <jinyoungp@xxxxxxxxxx>
* Tom Cherry <tcherry@xxxxxxxxxx>
* Prashant Gaikwad <pgaikwad@xxxxxxxxxx>
* Dan Willemsen <dwillemsen@xxxxxxxxxx>
* Laxman Dewangan <ldewangan@xxxxxxxxxx>
During upstreaming, I (swarren):
* Converted to regmap.
* Allowed probing from device tree.
* Reworked the regulator driver to be represented as a single device that
provides multiple regulators, rather than as a device per regulator.
* Replaced many regulator ops with standard functions.
* Added ability to specify supplies for each regulator.
* Removed the WLED regulator. If/when we expose this in the driver, it
should be a backlight object not a regulator object.
* Renamed from max8907c->max8907, since the driver covers at least the
C and B revisions.
* General cleanup.
Signed-off-by: Gyungoh Yoo <jack.yoo@xxxxxxxxxxxx>
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
v2:
* Removed WLED regulator.
* Replaced list_voltage, set_voltage(_sel), get_voltage(_sel), enable,
disable ops with standard regulator core functions.
* Got rid of struct max8907_regulator_info; everything we need now is
part of the standard struct regulator_desc.
---
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max8907-regulator.c | 396 +++++++++++++++++++++++++++++++++
3 files changed, 405 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/max8907-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 9bc7749..129c827 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -171,6 +171,14 @@ config REGULATOR_MAX8660
This driver controls a Maxim 8660/8661 voltage output
regulator via I2C bus.
+config REGULATOR_MAX8907
+ tristate "Maxim 8907 voltage regulator"
+ depends on MFD_MAX8907
+ help
+ This driver controls a Maxim 8907 voltage output regulator
+ via I2C bus. The provided regulator is suitable for Tegra
+ chip to control Step-Down DC-DC and LDOs.
+
config REGULATOR_MAX8925
tristate "Maxim MAX8925 Power Management IC"
depends on MFD_MAX8925
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3342615..3a0dbc5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
+obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
new file mode 100644
index 0000000..713bc7b
--- /dev/null
+++ b/drivers/regulator/max8907-regulator.c
@@ -0,0 +1,396 @@
+/*
+ * max8907-regulator.c -- support regulators in max8907
+ *
+ * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@xxxxxxxxxxxx>
+ * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Portions based on drivers/regulator/tps65910-regulator.c,
+ * Copyright 2010 Texas Instruments Inc.
+ * Author: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
+ * Author: Jorge Eduardo Candelaria <jedu@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8907.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX8907_II2RR_VERSION_MASK 0xF0
+#define MAX8907_II2RR_VERSION_REV_A 0x00
+#define MAX8907_II2RR_VERSION_REV_B 0x10
+#define MAX8907_II2RR_VERSION_REV_C 0x30
+
+struct max8907_regulator {
+ struct regulator_desc desc[MAX8907_NUM_REGULATORS];
+ struct regulator_dev *rdev[MAX8907_NUM_REGULATORS];
+};
+
+#define REG_MBATT() \
+ { \
+ .name = "MBATT", \
+ .supply_name = "mbatt", \
+ .id = MAX8907_MBATT, \
+ .ops = &max8907_mbatt_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }
+
+#define REG_LDO(ids, supply, base, min, max, step) \
+ { \
+ .name = #ids, \
+ .supply_name = supply, \
+ .id = MAX8907_##ids, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &max8907_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base) + MAX8907_VOUT, \
+ .vsel_mask = 0x3f, \
+ .enable_reg = (base) + MAX8907_CTL, \
+ .enable_mask = MAX8907_MASK_LDO_EN, \
+ .en_dis_set_mask = MAX8907_MASK_LDO_SEQ, \
+ }
+
+#define REG_FIXED(ids, supply, voltage) \
+ { \
+ .name = #ids, \
+ .supply_name = supply, \
+ .id = MAX8907_##ids, \
+ .n_voltages = 1, \
+ .ops = &max8907_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = (voltage), \
+ }
+
+#define REG_OUT5V(ids, supply, base, voltage) \
+ { \
+ .name = #ids, \
+ .supply_name = supply, \
+ .id = MAX8907_##ids, \
+ .n_voltages = 1, \
+ .ops = &max8907_out5v_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = (voltage), \
+ .enable_reg = (base), \
+ .enable_mask = MAX8907_MASK_OUT5V_EN, \
+ .en_dis_set_mask = MAX8907_MASK_OUT5V_ENSRC, \
+ .en_dis_clr_mask = MAX8907_MASK_OUT5V_VINEN, \
+ }
+
+#define REG_BBAT(ids, supply, base, min, max, step) \
+ { \
+ .name = #ids, \
+ .supply_name = supply, \
+ .id = MAX8907_##ids, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &max8907_bbat_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base), \
+ .vsel_mask = MAX8907_MASK_VBBATTCV, \
+ }
+
+#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \
+ 750000, 3900000, 50000)
+#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \
+ 650000, 2225000, 25000)
+
+static int max8907_regulator_ldo_is_enabled(struct regulator_dev *dev);
+static int max8907_regulator_out5v_is_enabled(struct regulator_dev *dev);
+
+static struct regulator_ops max8907_mbatt_ops = {
+};
+
+static struct regulator_ops max8907_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = max8907_regulator_ldo_is_enabled,
+};
+
+static struct regulator_ops max8907_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage = regulator_get_voltage_fixed,
+};
+
+static struct regulator_ops max8907_out5v_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage = regulator_get_voltage_fixed,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = max8907_regulator_out5v_is_enabled,
+};
+
+static struct regulator_ops max8907_bbat_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_desc max8907_regulators[] = {
+ REG_MBATT(),
+ REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000),
+ REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500),
+ REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000),
+ LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1),
+ LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2),
+ LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3),
+ LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4),
+ LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5),
+ LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6),
+ LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7),
+ LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8),
+ LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9),
+ LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10),
+ LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11),
+ LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12),
+ LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13),
+ LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14),
+ LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15),
+ LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16),
+ LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17),
+ LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18),
+ LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19),
+ LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20),
+ REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000),
+ REG_OUT5V(OUT33V, "mbatt", MAX8907_REG_OUT33VEN, 3300000),
+ REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG,
+ 2400000, 3000000, 200000),
+ REG_FIXED(SDBY, "MBATT", 1200000),
+ REG_FIXED(VRTC, "MBATT", 3300000),
+};
+
+static int max8907_regulator_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
+ if (ret < 0)
+ return -EDOM;
+
+ return (val & MAX8907_MASK_LDO_EN) || !(val & MAX8907_MASK_LDO_SEQ);
+}
+
+static int max8907_regulator_out5v_is_enabled(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
+ if (ret < 0)
+ return -EDOM;
+
+ if ((val &
+ (MAX8907_MASK_OUT5V_VINEN | MAX8907_MASK_OUT5V_ENSRC |
+ MAX8907_MASK_OUT5V_EN))
+ == MAX8907_MASK_OUT5V_ENSRC)
+ return 1;
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+
+#define MATCH(_name, _id) \
+ { \
+ .name = #_name, \
+ .driver_data = (void *)&max8907_regulators[MAX8907_##_id], \
+ }
+
+static struct of_regulator_match max8907_matches[] = {
+ MATCH(mbatt, MBATT),
+ MATCH(sd1, SD1),
+ MATCH(sd2, SD2),
+ MATCH(sd3, SD3),
+ MATCH(ldo1, LDO1),
+ MATCH(ldo2, LDO2),
+ MATCH(ldo3, LDO3),
+ MATCH(ldo4, LDO4),
+ MATCH(ldo5, LDO5),
+ MATCH(ldo6, LDO6),
+ MATCH(ldo7, LDO7),
+ MATCH(ldo8, LDO8),
+ MATCH(ldo9, LDO9),
+ MATCH(ldo10, LDO10),
+ MATCH(ldo11, LDO11),
+ MATCH(ldo12, LDO12),
+ MATCH(ldo13, LDO13),
+ MATCH(ldo14, LDO14),
+ MATCH(ldo15, LDO15),
+ MATCH(ldo16, LDO16),
+ MATCH(ldo17, LDO17),
+ MATCH(ldo18, LDO18),
+ MATCH(ldo19, LDO19),
+ MATCH(ldo20, LDO20),
+ MATCH(out5v, OUT5V),
+ MATCH(out33v, OUT33V),
+ MATCH(bbat, BBAT),
+ MATCH(sdby, SDBY),
+ MATCH(vrtc, VRTC),
+};
+
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.parent->of_node;
+ struct device_node *regulators;
+ int ret;
+
+ if (!pdev->dev.parent->of_node)
+ return 0;
+
+ regulators = of_find_node_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulators node not found\n");
+ return -EINVAL;
+ }
+
+ ret = of_regulator_match(pdev->dev.parent, regulators,
+ max8907_matches,
+ ARRAY_SIZE(max8907_matches));
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+static int max8907_regulator_parse_dt(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
+static __devinit int max8907_regulator_probe(struct platform_device *pdev)
+{
+ struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent);
+ struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev);
+ int ret;
+ struct max8907_regulator *pmic;
+ unsigned int version;
+ int i;
+ struct regulator_config config = {};
+ struct regulator_init_data *idata;
+ const char *mbatt_rail_name = NULL;
+
+ ret = max8907_regulator_parse_dt(pdev);
+ if (ret)
+ return ret;
+
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic) {
+ dev_err(&pdev->dev, "Failed to alloc pmic\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, pmic);
+
+ memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc));
+
+ /* Backwards compatibility with MAX8907B; SD1 uses different voltages */
+ regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &version);
+ if ((version & MAX8907_II2RR_VERSION_MASK) ==
+ MAX8907_II2RR_VERSION_REV_B) {
+ pmic->desc[MAX8907_SD1].min_uV = 637500;
+ pmic->desc[MAX8907_SD1].uV_step = 12500;
+ pmic->desc[MAX8907_SD1].n_voltages = (1425000 - 637500) / 12500;
+ }
+
+ for (i = 0; i < MAX8907_NUM_REGULATORS; i++) {
+ config.dev = pdev->dev.parent;
+ if (pdata)
+ idata = pdata->init_data[i];
+ else
+ idata = max8907_matches[i].init_data;
+ config.init_data = idata;
+ config.driver_data = pmic;
+ config.regmap = max8907->regmap_gen;
+ config.of_node = max8907_matches[i].of_node;
+
+ switch (pmic->desc[i].id) {
+ case MAX8907_MBATT:
+ mbatt_rail_name = idata->constraints.name;
+ break;
+ case MAX8907_BBAT:
+ case MAX8907_SDBY:
+ case MAX8907_VRTC:
+ idata->supply_regulator = mbatt_rail_name;
+ break;
+ }
+
+ pmic->rdev[i] = regulator_register(&pmic->desc[i], &config);
+ if (IS_ERR(pmic->rdev[i])) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ pmic->desc[i].name);
+ ret = PTR_ERR(pmic->rdev[i]);
+ goto err_unregister_regulator;
+ }
+ }
+
+ return 0;
+
+err_unregister_regulator:
+ while (--i >= 0)
+ regulator_unregister(pmic->rdev[i]);
+ return ret;
+}
+
+static __devexit int max8907_regulator_remove(struct platform_device *pdev)
+{
+ struct max8907_regulator *pmic;
+ int i;
+
+ for (i = 0; i < MAX8907_NUM_REGULATORS; i++)
+ regulator_unregister(pmic->rdev[i]);
+
+ return 0;
+}
+
+static struct platform_driver max8907_regulator_driver = {
+ .driver = {
+ .name = "max8907-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = max8907_regulator_probe,
+ .remove = __devexit_p(max8907_regulator_remove),
+};
+
+static int __init max8907_regulator_init(void)
+{
+ return platform_driver_register(&max8907_regulator_driver);
+}
+
+subsys_initcall(max8907_regulator_init);
+
+static void __exit max8907_reg_exit(void)
+{
+ platform_driver_unregister(&max8907_regulator_driver);
+}
+
+module_exit(max8907_reg_exit);
+
+MODULE_DESCRIPTION("MAX8907 regulator driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@xxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/