Re: [PATCH 0/3] ARM: dt: tegra: cardhu: add entry for regulators

[Laxman Dewangan]

On Wednesday 08 August 2012 10:58 PM, Stephen Warren wrote:
> On 08/08/2012 12:48 AM, Laxman Dewangan wrote:
> > This patch series add the PMIC and fixed regulators for
> > cardhu board. There is multiple versions of cardhu baord named
> > as A01, A02, A03..and so on. Cardhu A01 and A03 are not supported.
> > Cardhu A02 and A04 have different sets of GPIO for regualtors.
> > The cardhu A04 is compatible for A05, A06 and A07 in GPIOs.
> > This patch series split the cardhu dts file to cardhu-a02 and
> > carchu-a04 and then add entry for different fixed regualtors.
> Two more comments on this patch, sorry for the noise...
>
> 1) With this patch, running "reboot" or "shutdown -r now" no longer
> works; the system hangs. Reboot works fine without this patch, in
> next-20120708.

I tested reboot and it worked fine with me on my patch v2 series.

> 2) U-Boot initializes the LCD, and prints to it. This is left running
> when the kernel is booted, and the kernel doesn't reprogram the HW, so
> the LCD continues to scan out some "random" area of memory. Typically,
> this then gets used and so the LCD shows random patterns. In today's
> linux-next it seems to be turned black though; not sure why that's
> happening. Either way, this patch turns the whole LCD completely white.
> Is that an expected change?

The panel power was not ON and hence the white screen. Fixed it in patch 
V2 to make always ON with boot-on.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/