Re: [PATCH v2] iio: adc: add new lp8788 adc driver

[Lars-Peter Clausen]

On 08/10/2012 09:06 AM, Kim, Milo wrote:
> [...]
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		*val = result;
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = adc_const[id] * ((result * 1000 + 500) / 1000);

This looks wrong. The IIO_CHAN_INFO_SCALE attribute is the factor by which
IIO_CHAN_INFO_RAW needs to be multiplied to get the value in the proper unit,
which is specified in the IIO ABI spec. E.g. milli volts for voltages.

What you return here seems to be the IIO_CHAN_INFO_PROCESSED attribute. Which
basically is raw * scale.

> +		*val2 = 0;
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	default:
> +		break;
> +	}
> +
> +err:
> +	return -EINVAL;
> +}
> +
> [...]
> +}
> +
> +static struct iio_chan_spec lp8788_adc_channels[] = {

const

> +	[LPADC_VBATT_5P5] = LP8788_CHAN(VBATT_5P5, IIO_VOLTAGE),
> +	[LPADC_VIN_CHG]   = LP8788_CHAN(VIN_CHG, IIO_VOLTAGE),
> +	[LPADC_IBATT]     = LP8788_CHAN(IBATT, IIO_CURRENT),
> +	[LPADC_IC_TEMP]   = LP8788_CHAN(IC_TEMP, IIO_TEMP),
> +	[LPADC_VBATT_6P0] = LP8788_CHAN(VBATT_6P0, IIO_VOLTAGE),
> +	[LPADC_VBATT_5P0] = LP8788_CHAN(VBATT_5P0, IIO_VOLTAGE),
> +	[LPADC_ADC1]      = LP8788_CHAN(ADC1, IIO_VOLTAGE),
> +	[LPADC_ADC2]      = LP8788_CHAN(ADC2, IIO_VOLTAGE),
> +	[LPADC_VDD]       = LP8788_CHAN(VDD, IIO_VOLTAGE),
> +	[LPADC_VCOIN]     = LP8788_CHAN(VCOIN, IIO_VOLTAGE),
> +	[LPADC_VDD_LDO]   = LP8788_CHAN(VDD_LDO, IIO_VOLTAGE),
> +	[LPADC_ADC3]      = LP8788_CHAN(ADC3, IIO_VOLTAGE),
> +	[LPADC_ADC4]      = LP8788_CHAN(ADC4, IIO_VOLTAGE),
> +};
> +


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/