[PATCH] [trivial] target: Fix typo in drivers/target
From: Masanari Iida
Date: Thu Aug 16 2012 - 09:43:23 EST
Correct spelling typo in printk and comment within
drivers/target.
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
drivers/target/target_core_alua.c | 2 +-
drivers/target/target_core_configfs.c | 2 +-
drivers/target/target_core_device.c | 6 +++---
drivers/target/target_core_fabric_lib.c | 8 ++++----
drivers/target/target_core_pr.c | 4 ++--
drivers/target/target_core_pscsi.c | 2 +-
drivers/target/target_core_tpg.c | 2 +-
drivers/target/target_core_transport.c | 4 ++--
8 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 9179997..91b84d3 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -337,7 +337,7 @@ int target_emulate_set_target_port_groups(struct se_cmd *cmd)
*/
rtpi = get_unaligned_be16(ptr + 2);
/*
- * Locate the matching relative target port identifer
+ * Locate the matching relative target port identifier
* for the struct se_device storage object.
*/
spin_lock(&dev->se_port_lock);
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 801efa8..1ee2c99 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -1208,7 +1208,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_holder_tg_port(
" Target Node Endpoint: %s\n", tfo->get_fabric_name(),
tfo->tpg_get_wwn(se_tpg));
len += sprintf(page+len, "SPC-3 Reservation: Relative Port"
- " Identifer Tag: %hu %s Portal Group Tag: %hu"
+ " Identifier Tag: %hu %s Portal Group Tag: %hu"
" %s Logical Unit: %u\n", lun->lun_sep->sep_rtpi,
tfo->get_fabric_name(), tfo->tpg_get_tag(se_tpg),
tfo->get_fabric_name(), lun->unpacked_lun);
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index cf2c66f..97b47ab 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -531,7 +531,7 @@ static struct se_port *core_alloc_port(struct se_device *dev)
}
again:
/*
- * Allocate the next RELATIVE TARGET PORT IDENTIFER for this struct se_device
+ * Allocate the next RELATIVE TARGET PORT IDENTIFIER for this struct se_device
* Here is the table from spc4r17 section 7.7.3.8.
*
* Table 473 -- RELATIVE TARGET PORT IDENTIFIER field
@@ -548,7 +548,7 @@ again:
list_for_each_entry(port_tmp, &dev->dev_sep_list, sep_list) {
/*
- * Make sure RELATIVE TARGET PORT IDENTIFER is unique
+ * Make sure RELATIVE TARGET PORT IDENTIFIER is unique
* for 16-bit wrap..
*/
if (port->sep_rtpi == port_tmp->sep_rtpi)
@@ -595,7 +595,7 @@ static void core_export_port(
}
dev->dev_port_count++;
- port->sep_index = port->sep_rtpi; /* RELATIVE TARGET PORT IDENTIFER */
+ port->sep_index = port->sep_rtpi; /* RELATIVE TARGET PORT IDENTIFIER */
}
/*
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 283a36e..e460d62 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -338,7 +338,7 @@ u32 iscsi_get_pr_transport_id_len(
* 00b: iSCSI Initiator device TransportID format
*/
if (pr_reg->isid_present_at_reg) {
- len += 5; /* For ",i,0x" ASCII seperator */
+ len += 5; /* For ",i,0x" ASCII separator */
len += 7; /* For iSCSI Initiator Session ID + Null terminator */
*format_code = 1;
} else
@@ -415,20 +415,20 @@ char *iscsi_parse_pr_out_transport_id(
*out_tid_len = (add_len + 4);
}
/*
- * Check for ',i,0x' seperator between iSCSI Name and iSCSI Initiator
+ * Check for ',i,0x' separator between iSCSI Name and iSCSI Initiator
* Session ID as defined in Table 390 - iSCSI initiator port TransportID
* format.
*/
if (format_code == 0x40) {
p = strstr(&buf[4], ",i,0x");
if (!p) {
- pr_err("Unable to locate \",i,0x\" seperator"
+ pr_err("Unable to locate \",i,0x\" separator"
" for Initiator port identifier: %s\n",
&buf[4]);
return NULL;
}
*p = '\0'; /* Terminate iSCSI Name */
- p += 5; /* Skip over ",i,0x" seperator */
+ p += 5; /* Skip over ",i,0x" separator */
*port_nexus_ptr = p;
/*
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 1e94650..702dfe0 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1612,7 +1612,7 @@ static int core_scsi3_decode_spec_i_port(
goto out;
}
/*
- * Locate the desination initiator ACL to be registered
+ * Locate the destination initiator ACL to be registered
* from the decoded fabric module specific TransportID
* at *i_str.
*/
@@ -4249,7 +4249,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd)
buf[off++] = ((port->sep_rtpi >> 8) & 0xff);
buf[off++] = (port->sep_rtpi & 0xff);
} else
- off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */
+ off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFIER */
/*
* Now, have the $FABRIC_MOD fill in the protocol identifier
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 6e32ff6..5ff2d92 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -264,7 +264,7 @@ pscsi_get_inquiry_vpd_device_ident(struct scsi_device *sdev,
" length zero!\n");
break;
}
- pr_debug("T10 VPD Identifer Length: %d\n", ident_len);
+ pr_debug("T10 VPD Identifier Length: %d\n", ident_len);
vpd = kzalloc(sizeof(struct t10_vpd), GFP_KERNEL);
if (!vpd) {
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index b8628a5..a531fe2 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -303,7 +303,7 @@ struct se_node_acl *core_tpg_check_initiator_node_acl(
}
/*
* Here we only create demo-mode MappedLUNs from the active
- * TPG LUNs if the fabric is not explictly asking for
+ * TPG LUNs if the fabric is not explicitly asking for
* tpg_check_demo_mode_login_only() == 1.
*/
if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only == NULL) ||
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 0eaae23..434c697 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -941,7 +941,7 @@ int
transport_set_vpd_ident(struct t10_vpd *vpd, unsigned char *page_83)
{
static const char hex_str[] = "0123456789abcdef";
- int j = 0, i = 4; /* offset to start of the identifer */
+ int j = 0, i = 4; /* offset to start of the identifier */
/*
* The VPD Code Set (encoding)
@@ -2796,7 +2796,7 @@ bool transport_wait_for_tasks(struct se_cmd *cmd)
spin_lock_irqsave(&cmd->t_state_lock, flags);
cmd->transport_state &= ~(CMD_T_ACTIVE | CMD_T_STOP);
- pr_debug("wait_for_tasks: Stopped wait_for_compltion("
+ pr_debug("wait_for_tasks: Stopped wait_for_completion("
"&cmd->t_transport_stop_comp) for ITT: 0x%08x\n",
cmd->se_tfo->get_task_tag(cmd));
--
1.7.12.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/