Re: [PATCH] bnx2: turn off the network statck duringinitialization

From: Michael Chan
Date: Thu Aug 16 2012 - 14:57:14 EST


On Thu, 2012-08-16 at 11:21 -0700, Jiang Wang wrote:
> The initialization state of bnx2 driver is wrong. It does not turn
> of the Linux network stack using netif_carrier_off. This may lead to
> inconsistent report from ethtool as the link is up but speed is
> unknown when the cable is not plugged in.
>
> E.g.
> Speed: Unknown! (0)<--------------------------------------
> Duplex: Half <--------------------------------------
> MDI: Unknown! (0)
> Port: Twisted Pair
> PHYAD: 1
> Transceiver: internal
> Auto-negotiation: on
> Supports Wake-on: g
> Wake-on: d
> Link detected: yes <---------------------------------------
>
> This patches fixed the problem by turning off the network stack
> during initialization.
>
> Signed-off-by: Jiang Wang <jwang@xxxxxxxxxxxx>
> ---
> drivers/net/ethernet/broadcom/bnx2.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
> index ac7b744..ce4548d 100644
> --- a/drivers/net/ethernet/broadcom/bnx2.c
> +++ b/drivers/net/ethernet/broadcom/bnx2.c
> @@ -8463,6 +8463,10 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> dev->features |= dev->hw_features;
> dev->priv_flags |= IFF_UNICAST_FLT;
>
> + /* tell the stack to leave us alone until bnx2_open() is called */
> + netif_carrier_off(dev);

We have tried this before and this didn't work. netif_carrier_off()
calls linkwatch_fire_event() to schedule the event. If
register_netdev() fails for whatever reason, the netdev will be freed
but the link_watch event may still be scheduled.

Calling netif_carrier_off() after register_netdev() returns successfully
also may not work as it will race with bnx2_open() which enables IRQ.
An linkup IRQ can happen at time and we may end up with the wrong
carrier state because of the race condition.

> + netif_stop_queue(dev);
> +
> if ((rc = register_netdev(dev))) {
> dev_err(&pdev->dev, "Cannot register net device\n");
> goto error;



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/