Re: [PATCH RESEND 2/2] i2c: pnx: Fix read transactions of >= 2 bytes

[Roland Stigge]

Hi,

On 18/08/12 11:52, Wolfram Sang wrote:
> On Wed, Aug 08, 2012 at 09:42:32AM +0200, Roland Stigge wrote:
>> On transactions with n>=2 bytes, the controller actually wrongly
>> clocks in n+1 bytes. This is caused by the (wrong) assumption
>> that RFE in the Status Register is 1 iff there is no byte already
>> ordered (via a dummy TX byte). This lead to the implementation of
>> synchronized byte ordering, e.g.:
>> 
>> Dummy-TX - RX - Dummy-TX - RX - ...
>> 
>> But since RFE actually stays high after some Dummy-TX, it rather
>> looks like:
>> 
>> Dummy-TX - Dummy-TX - RX - Dummy-TX - RX - (RX)
>> 
>> The last RX byte is clocked in by the bus controller, but ignored
>> by the kernel when filling the userspace buffer.
>> 
>> This patch fixes the issue by asking for RX via Dummy-TX
>> asynchronously. Introducing a separate counter for TX bytes.
>> 
>> Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>
>> 
>> --- Applies to v3.6-rc1
>> 
>> This patch for i2c-pnx affects PNX4008 and LPC32xx (and LPC31xx,
>> not yet in mainline). Can you please test?
>> 
>> Thanks in advance!
> 
> I assume you checked this on LPC32xx?

Yes.

The bug surfaced when we debugged unexpected behaviour with I2C
clients. A colleague noticed that sometimes, there were more bytes
transferred than expected, confusing some I2C clients.

The patch fixes exactly that.

Thanks,

Roland
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/