[PATCH v3] serial: add a new helper function
From: Huang Shijie
Date: Wed Aug 22 2012 - 10:12:42 EST
In most of the time, the driver needs to check if the cts flow control
is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually,
which is not a grace way. So add a new wraper function to make the code
tidy and clean.
Signed-off-by: Huang Shijie <shijie8@xxxxxxxxx>
---
v2 --> v3:
this patch is based on Alan's "tty: move the async flags from the seria.."
v1 --> v2:
move the function tty.h to serial.h
---
drivers/char/pcmcia/synclink_cs.c | 2 +-
drivers/tty/amiserial.c | 2 +-
drivers/tty/cyclades.c | 2 +-
drivers/tty/isicom.c | 2 +-
drivers/tty/mxser.c | 2 +-
drivers/tty/serial/mxs-auart.c | 2 +-
drivers/tty/serial/serial_core.c | 4 ++--
drivers/tty/synclink.c | 2 +-
drivers/tty/synclink_gt.c | 2 +-
drivers/tty/synclinkmp.c | 2 +-
include/linux/tty.h | 6 ++++++
net/irda/ircomm/ircomm_tty.c | 4 ++--
net/irda/ircomm/ircomm_tty_attach.c | 2 +-
13 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 5db08c7..3f57d5de 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1050,7 +1050,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (info->serial_signals & SerialSignal_CTS) {
if (debug_level >= DEBUG_LEVEL_ISR)
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 2b7535d..42d0a25 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -420,7 +420,7 @@ static void check_modem_status(struct serial_state *info)
tty_hangup(port->tty);
}
}
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
if (port->tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index e3954da..0a6a0bc 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -727,7 +727,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
else
tty_hangup(tty);
}
- if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+ if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (mdm_status & CyCTS) {
/* cy_start isn't used
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 99cf22e..d7492e1 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -600,7 +600,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
port->status &= ~ISI_DCD;
}
- if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (header & ISI_CTS) {
port->port.tty->hw_stopped = 0;
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index bb2da4c..cfda47d 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -830,7 +830,7 @@ static void mxser_check_modem_status(struct tty_struct *tty,
wake_up_interruptible(&port->port.open_wait);
}
- if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
tty->hw_stopped = 0;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 3a667ee..dafeef2 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -262,7 +262,7 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
ctrl &= ~AUART_CTRL2_RTSEN;
if (mctrl & TIOCM_RTS) {
- if (u->state->port.flags & ASYNC_CTS_FLOW)
+ if (tty_port_cts_enabled(&u->state->port))
ctrl |= AUART_CTRL2_RTSEN;
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 5b308c8..1920e5c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -176,7 +176,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
tty->hw_stopped = 1;
@@ -2493,7 +2493,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
uport->icount.cts++;
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 666aa14..70e3a52 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1359,7 +1359,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if (info->port.tty->hw_stopped) {
if (status & MISCSTATUS_CTS) {
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 45f6136..b38e954 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -2053,7 +2053,7 @@ static void cts_change(struct slgt_info *info, unsigned short status)
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
- if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&info->port)) {
if (info->port.tty) {
if (info->port.tty->hw_stopped) {
if (info->signals & SerialSignal_CTS) {
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 53429c8..f17d9f3 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -2500,7 +2500,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if ( info->port.tty ) {
if (info->port.tty->hw_stopped) {
diff --git a/include/linux/tty.h b/include/linux/tty.h
index dbebd1e..9892121 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -514,6 +514,12 @@ static inline struct tty_port *tty_port_get(struct tty_port *port)
return port;
}
+/* If the cts flow control is enabled, return true. */
+static inline bool tty_port_cts_enabled(struct tty_port *port)
+{
+ return port->flags & ASYNC_CTS_FLOW;
+}
+
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 9668990..95a3a7a 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -1070,7 +1070,7 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
goto put;
}
}
- if (tty && self->port.flags & ASYNC_CTS_FLOW) {
+ if (tty && tty_port_cts_enabled(&self->port)) {
if (tty->hw_stopped) {
if (status & IRCOMM_CTS) {
IRDA_DEBUG(2,
@@ -1313,7 +1313,7 @@ static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
seq_puts(m, "Flags:");
sep = ' ';
- if (self->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&self->port)) {
seq_printf(m, "%cASYNC_CTS_FLOW", sep);
sep = '|';
}
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
index 3ab70e7..edab393 100644
--- a/net/irda/ircomm/ircomm_tty_attach.c
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -578,7 +578,7 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self)
* will have to wait for the peer device (DCE) to raise the CTS
* line.
*/
- if ((self->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&self->port) &&
((self->settings.dce & IRCOMM_CTS) == 0)) {
IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __func__ );
goto put;
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/