[PATCH 1/1] xhci: Recognize USB 3.0 devices as superspeed at powerup

[manoj . iyer]

From: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>

On Intel Panther Point chipset USB 3.0 devices show up as
high-speed devices on powerup, but after an s3 cycle they are
correctly recognized as SuperSpeed. At powerup switch the port
to xHCI so that USB 3.0 devices are correctly recognized.

BugLink: http://bugs.launchpad.net/bugs/1000424

Signed-off-by: Manoj Iyer <manoj.iyer@xxxxxxxxxxxxx>
---
 drivers/usb/host/pci-quirks.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index c5e9e4a..486e812 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -870,9 +870,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	/* Disable any BIOS SMIs and clear all SMI events*/
 	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
+hc_init:
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
-hc_init:
+
 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
 	/* Wait for the host controller to be ready before writing any
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/