[RFC ebeam PATCH v4 0/2] new USB eBeam input driver
From: Yann Cantin
Date: Wed Aug 22 2012 - 18:10:28 EST
Hi,
New USB input driver for eBeam devices.
Currently supported (tested) :
- Luidia eBeam classic projection and edge projection models
- Nec "interactive solution" NP01Wi1 & NP01Wi2 accessories.
In fact, from basic usb point of view, all these devices are
indistinguishable : they have the same usb ids and (blank) hid
report descriptors. There's other re-branded hardware that need to be
test, but i bet on same ids.
So, the code :
Patch 1 to blacklist the devices for hid generic-usb.
Patch 2 is the actual driver.
Notable stuff :
- use div64_s64 for portable 64/64-bits divisions.
- 13 sysfs custom files : 9 values for the transformation matrix,
4 for xy ranges and a calibration trigger.
The module run fine with a 3.3.6 and a 3.5.0 kernel, both x86_32 and 64.
Thanks for your help.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/