[PATCH] ARM: mach-pnx4008: Remove architecture

[Roland Stigge]

This patch removes the ARM architecture mach-pnx4008. No direct support or user
feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc
maintainers.

Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>
---
 arch/arm/Kconfig                                  |    8 
 arch/arm/Makefile                                 |    1 
 arch/arm/configs/pnx4008_defconfig                |  472 ---------
 arch/arm/mach-pnx4008/Makefile                    |   12 
 arch/arm/mach-pnx4008/Makefile.boot               |    4 
 arch/arm/mach-pnx4008/clock.c                     | 1001 -------------------
 arch/arm/mach-pnx4008/clock.h                     |   43 
 arch/arm/mach-pnx4008/core.c                      |  290 -----
 arch/arm/mach-pnx4008/dma.c                       | 1105 ----------------------
 arch/arm/mach-pnx4008/gpio.c                      |  328 ------
 arch/arm/mach-pnx4008/i2c.c                       |   86 -
 arch/arm/mach-pnx4008/i2c.c.orig                  |   87 -
 arch/arm/mach-pnx4008/include/mach/clock.h        |   62 -
 arch/arm/mach-pnx4008/include/mach/debug-macro.S  |   21 
 arch/arm/mach-pnx4008/include/mach/dma.h          |  160 ---
 arch/arm/mach-pnx4008/include/mach/entry-macro.S  |  116 --
 arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h |  241 ----
 arch/arm/mach-pnx4008/include/mach/hardware.h     |   32 
 arch/arm/mach-pnx4008/include/mach/irq.h          |   42 
 arch/arm/mach-pnx4008/include/mach/irqs.h         |  215 ----
 arch/arm/mach-pnx4008/include/mach/param.h        |   21 
 arch/arm/mach-pnx4008/include/mach/platform.h     |   69 -
 arch/arm/mach-pnx4008/include/mach/pm.h           |   33 
 arch/arm/mach-pnx4008/include/mach/timex.h        |   19 
 arch/arm/mach-pnx4008/include/mach/uncompress.h   |   46 
 arch/arm/mach-pnx4008/irq.c                       |  121 --
 arch/arm/mach-pnx4008/pm.c                        |  153 ---
 arch/arm/mach-pnx4008/serial.c                    |   67 -
 arch/arm/mach-pnx4008/sleep.S                     |  195 ---
 arch/arm/mach-pnx4008/time.c                      |  134 --
 arch/arm/mach-pnx4008/time.h                      |   70 -
 arch/arm/tools/mach-types                         |    1 
 drivers/i2c/busses/Kconfig                        |    2 
 drivers/usb/Kconfig                               |    1 
 drivers/usb/host/Kconfig                          |    2 
 drivers/usb/host/ohci-hcd.c                       |    2 
 drivers/usb/host/ohci-nxp.c                       |   84 -
 drivers/video/Kconfig                             |   15 
 drivers/video/Makefile                            |    2 
 drivers/video/pnx4008/Makefile                    |    7 
 drivers/video/pnx4008/dum.h                       |  211 ----
 drivers/video/pnx4008/fbcommon.h                  |   43 
 drivers/video/pnx4008/pnxrgbfb.c                  |  198 ---
 drivers/video/pnx4008/sdum.c                      |  861 -----------------
 drivers/video/pnx4008/sdum.h                      |  136 --
 drivers/watchdog/Kconfig                          |    6 
 46 files changed, 7 insertions(+), 6818 deletions(-)

--- linux-2.6.orig/arch/arm/Kconfig
+++ linux-2.6/arch/arm/Kconfig
@@ -709,14 +709,6 @@ config ARCH_PICOXCELL
 	  family of Femtocell devices.  The picoxcell support requires device tree
 	  for all boards.
 
-config ARCH_PNX4008
-	bool "Philips Nexperia PNX4008 Mobile"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for Philips PNX4008 mobile platform.
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
--- linux-2.6.orig/arch/arm/Makefile
+++ linux-2.6/arch/arm/Makefile
@@ -167,7 +167,6 @@ machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	:= omap2
 machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
-machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
--- linux-2.6.orig/arch/arm/configs/pnx4008_defconfig
+++ /dev/null
@@ -1,472 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PNX4008=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
--- linux-2.6.orig/arch/arm/mach-pnx4008/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y			:= core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
--- linux-2.6.orig/arch/arm/mach-pnx4008/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
-
--- linux-2.6.orig/arch/arm/mach-pnx4008/clock.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.c
- *
- * Clock control driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@xxxxxxxxxx>
- * Generic clock management functions are partially based on:
- *  linux/arch/arm/mach-omap/clock.c
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-#include "clock.h"
-
-/*forward declaration*/
-static struct clk per_ck;
-static struct clk hclk_ck;
-static struct clk ck_1MHz;
-static struct clk ck_13MHz;
-static struct clk ck_pll1;
-static int local_set_rate(struct clk *clk, u32 rate);
-
-static inline void clock_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void clock_unlock(void)
-{
-	local_irq_enable();
-}
-
-static void propagate_rate(struct clk *clk)
-{
-	struct clk *tmp_clk;
-
-	tmp_clk = clk;
-	while (tmp_clk->propagate_next) {
-		tmp_clk = tmp_clk->propagate_next;
-		local_set_rate(tmp_clk, tmp_clk->user_rate);
-	}
-}
-
-static void clk_reg_disable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) &
-			     ~(1 << clk->enable_shift), clk->enable_reg);
-}
-
-static int clk_reg_enable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) |
-			     (1 << clk->enable_shift), clk->enable_reg);
-	return 0;
-}
-
-static inline void clk_reg_disable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) &
-			     ~(1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static inline void clk_reg_enable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) |
-			     (1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static int clk_wait_for_pll_lock(struct clk *clk)
-{
-	int i;
-	i = 0;
-	while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ;	/*wait for PLL to lock */
-
-	if (!(__raw_readl(clk->scale_reg) & 1)) {
-		printk(KERN_ERR
-		       "%s ERROR: failed to lock, scale reg data: %x\n",
-		       clk->name, __raw_readl(clk->scale_reg));
-		return -1;
-	}
-	return 0;
-}
-
-static int switch_to_dirty_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
-	if (!(tmp_reg & 1)) {
-		tmp_reg |= (1 << 1);	/* Trigger switch to 13'MHz (dirty) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13'MHz selection status */
-
-		if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int switch_to_clean_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
-	if (tmp_reg & 1) {
-		tmp_reg &= ~(1 << 1);	/* Trigger switch to 13MHz (clean) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13MHz selection status */
-
-		if (__raw_readl(clk->parent_switch_reg) & 1) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int set_13MHz_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-
-	if (parent == &ck_13MHz)
-		ret = switch_to_clean_13mhz(clk);
-	else if (parent == &ck_pll1)
-		ret = switch_to_dirty_13mhz(clk);
-
-	return ret;
-}
-
-#define PLL160_MIN_FCCO 156000
-#define PLL160_MAX_FCCO 320000
-
-/*
- * Calculate pll160 settings.
- * Possible input: up to 320MHz with step of clk->parent->rate.
- * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
- * Ignored paths: "feedback" (bit 13 set), "div-by-N".
- * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
- * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
- * Please refer to PNX4008 IC manual for details.
- */
-
-static int pll160_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp_reg, tmp_m, tmp_2p, i;
-	u32 parent_rate;
-	int ret = -EINVAL;
-
-	parent_rate = clk->parent->rate;
-
-	if (!parent_rate)
-		goto out;
-
-	/* set direct run for ARM or disable output for others  */
-	clk_reg_disable(clk);
-
-	/* disable source input as well (ignored for ARM) */
-	clk_reg_disable1(clk);
-
-	tmp_reg = __raw_readl(clk->scale_reg);
-	tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	rate -= rate % parent_rate;	/*round down the input */
-
-	if (rate > PLL160_MAX_FCCO)
-		rate = PLL160_MAX_FCCO;
-
-	if (!rate) {
-		clk->rate = 0;
-		ret = 0;
-		goto out;
-	}
-
-	clk_reg_enable1(clk);
-	tmp_reg = __raw_readl(clk->scale_reg);
-
-	if (rate == parent_rate) {
-		/*enter direct bypass mode */
-		tmp_reg |= ((1 << 14) | (1 << 15));
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = parent_rate;
-		clk_reg_enable(clk);
-		ret = 0;
-		goto out;
-	}
-
-	i = 0;
-	for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
-		if (rate * tmp_2p >= PLL160_MIN_FCCO)
-			break;
-		i++;
-	}
-
-	if (tmp_2p > 1)
-		tmp_reg |= ((i - 1) << 11);
-	else
-		tmp_reg |= (1 << 14);	/*direct mode, no divide */
-
-	tmp_m = rate * tmp_2p;
-	tmp_m /= parent_rate;
-
-	tmp_reg |= (tmp_m - 1) << 1;	/*calculate M */
-	tmp_reg |= (1 << 16);	/*power up PLL */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	if (clk_wait_for_pll_lock(clk) < 0) {
-		clk_reg_disable(clk);
-		clk_reg_disable1(clk);
-
-		tmp_reg = __raw_readl(clk->scale_reg);
-		tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = 0;
-		ret = -EFAULT;
-		goto out;
-	}
-
-	clk->rate = (tmp_m * parent_rate) / tmp_2p;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
-
-	clk_reg_enable(clk);
-	ret = 0;
-
-out:
-	return ret;
-}
-
-/*configure PER_CLK*/
-static int per_clk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->scale_reg);
-	tmp &= ~(0x1f << 2);
-	tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-/*configure HCLK*/
-static int hclk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-	tmp = __raw_readl(clk->scale_reg);
-	tmp = tmp & ~0x3;
-	switch (rate) {
-	case 1:
-		break;
-	case 2:
-		tmp |= 1;
-		break;
-	case 4:
-		tmp |= 2;
-		break;
-	}
-
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-static u32 hclk_round_rate(struct clk *clk, u32 rate)
-{
-	switch (rate) {
-	case 1:
-	case 4:
-		return rate;
-	}
-	return 2;
-}
-
-static u32 per_clk_round_rate(struct clk *clk, u32 rate)
-{
-	return CLK_RATE_13MHZ;
-}
-
-static int on_off_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_enable(clk);
-		clk->rate = 1;
-	} else {
-		clk_reg_disable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static int on_off_inv_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		clk->rate = 1;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static u32 on_off_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? 1 : 0);
-}
-
-static u32 pll4_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
-		rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
-	return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
-}
-
-static u32 pll3_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	return (rate - rate % CLK_RATE_13MHZ);
-}
-
-static u32 pll5_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_48MHZ : 0);
-}
-
-static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_13MHZ : 0);
-}
-
-static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		udelay(500);
-		clk->rate = CLK_RATE_13MHZ;
-		ck_1MHz.rate = CLK_RATE_1MHZ;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-		ck_1MHz.rate = 0;
-	}
-	return 0;
-}
-
-static int pll1_set_rate(struct clk *clk, u32 rate)
-{
-#if 0 /* doesn't work on some boards, probably a HW BUG */
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		if (!clk_wait_for_pll_lock(clk)) {
-			clk->rate = CLK_RATE_13MHZ;
-		} else {
-			clk_reg_enable(clk);
-			clk->rate = 0;
-		}
-
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-#endif
-	return 0;
-}
-
-/* Clock sources */
-
-static struct clk osc_13MHz = {
-	.name = "osc_13MHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk ck_13MHz = {
-	.name = "ck_13MHz",
-	.parent = &osc_13MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &ck_13MHz_set_rate,
-	.enable_reg = OSC13CTRL_REG,
-	.enable_shift = 0,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk osc_32KHz = {
-	.name = "osc_32KHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_32KHZ,
-};
-
-/*attached to PLL5*/
-static struct clk ck_1MHz = {
-	.name = "ck_1MHz",
-	.flags = FIXED_RATE | PARENT_SET_RATE,
-	.parent = &ck_13MHz,
-};
-
-/* PLL1 (397) - provides 13' MHz clock */
-static struct clk ck_pll1 = {
-	.name = "ck_pll1",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &pll1_set_rate,
-	.enable_reg = PLLCTRL_REG,
-	.enable_shift = 1,
-	.scale_reg = PLLCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-};
-
-/* CPU/Bus PLL */
-static struct clk ck_pll4 = {
-	.name = "ck_pll4",
-	.parent = &ck_pll1,
-	.flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
-	.propagate_next = &per_ck,
-	.round_rate = &pll4_round_rate,
-	.set_rate = &pll160_set_rate,
-	.rate = CLK_RATE_208MHZ,
-	.scale_reg = HCLKPLLCTRL_REG,
-	.enable_reg = PWRCTRL_REG,
-	.enable_shift = 2,
-	.parent_switch_reg = SYSCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-/* USB PLL */
-static struct clk ck_pll5 = {
-	.name = "ck_pll5",
-	.parent = &ck_1MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll5_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = USBCTRL_REG,
-	.enable_reg = USBCTRL_REG,
-	.enable_shift = 18,
-	.enable_reg1 = USBCTRL_REG,
-	.enable_shift1 = 17,
-};
-
-/* XPERTTeak DSP PLL */
-static struct clk ck_pll3 = {
-	.name = "ck_pll3",
-	.parent = &ck_pll1,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll3_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = DSPPLLCTRL_REG,
-	.enable_reg = DSPCLKCTRL_REG,
-	.enable_shift = 3,
-	.enable_reg1 = DSPCLKCTRL_REG,
-	.enable_shift1 = 2,
-	.parent_switch_reg = DSPCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-static struct clk hclk_ck = {
-	.name = "hclk_ck",
-	.parent = &ck_pll4,
-	.flags = PARENT_SET_RATE,
-	.set_rate = &hclk_set_rate,
-	.round_rate = &hclk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = 2,
-	.user_rate = 2,
-};
-
-static struct clk per_ck = {
-	.name = "per_ck",
-	.parent = &ck_pll4,
-	.flags = FIXED_RATE,
-	.propagate_next = &hclk_ck,
-	.set_rate = &per_clk_set_rate,
-	.round_rate = &per_clk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-	.user_rate = CLK_RATE_13MHZ,
-};
-
-static struct clk m2hclk_ck = {
-	.name = "m2hclk_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_inv_set_rate,
-	.rate = 1,
-	.enable_shift = 6,
-	.enable_reg = PWRCTRL_REG,
-};
-
-static struct clk vfp9_ck = {
-	.name = "vfp9_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 4,
-	.enable_reg = VFP9CLKCTRL_REG,
-};
-
-static struct clk keyscan_ck = {
-	.name = "keyscan_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = KEYCLKCTRL_REG,
-};
-
-static struct clk touch_ck = {
-	.name = "touch_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = TSCLKCTRL_REG,
-};
-
-static struct clk pwm1_ck = {
-	.name = "pwm1_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk pwm2_ck = {
-	.name = "pwm2_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 2,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk jpeg_ck = {
-	.name = "jpeg_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = JPEGCLKCTRL_REG,
-};
-
-static struct clk ms_ck = {
-	.name = "ms_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 5,
-	.enable_reg = MSCTRL_REG,
-};
-
-static struct clk dum_ck = {
-	.name = "dum_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DUMCLKCTRL_REG,
-};
-
-static struct clk flash_ck = {
-	.name = "flash_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,	/* Only MLC clock supported */
-	.enable_reg = FLASHCLKCTRL_REG,
-};
-
-static struct clk i2c0_ck = {
-	.name = "i2c0_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 0,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c1_ck = {
-	.name = "i2c1_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 1,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c2_ck = {
-	.name = "i2c2_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 2,
-	.enable_reg = USB_OTG_CLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk spi0_ck = {
-	.name = "spi0_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk spi1_ck = {
-	.name = "spi1_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 4,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk dma_ck = {
-	.name = "dma_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DMACLKCTRL_REG,
-};
-
-static struct clk uart3_ck = {
-	.name = "uart3_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 0,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart4_ck = {
-	.name = "uart4_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart5_ck = {
-	.name = "uart5_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 2,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart6_ck = {
-	.name = "uart6_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 3,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk wdt_ck = {
-	.name = "wdt_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.enable_shift = 0,
-	.enable_reg = TIMCLKCTRL_REG,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-/* These clocks are visible outside this module
- * and can be initialized
- */
-static struct clk *onchip_clks[] __initdata = {
-	&ck_13MHz,
-	&ck_pll1,
-	&ck_pll4,
-	&ck_pll5,
-	&ck_pll3,
-	&vfp9_ck,
-	&m2hclk_ck,
-	&hclk_ck,
-	&dma_ck,
-	&flash_ck,
-	&dum_ck,
-	&keyscan_ck,
-	&pwm1_ck,
-	&pwm2_ck,
-	&jpeg_ck,
-	&ms_ck,
-	&touch_ck,
-	&i2c0_ck,
-	&i2c1_ck,
-	&i2c2_ck,
-	&spi0_ck,
-	&spi1_ck,
-	&uart3_ck,
-	&uart4_ck,
-	&uart5_ck,
-	&uart6_ck,
-	&wdt_ck,
-};
-
-static struct clk_lookup onchip_clkreg[] = {
-	{ .clk = &ck_13MHz,	.con_id = "ck_13MHz"	},
-	{ .clk = &ck_pll1,	.con_id = "ck_pll1"	},
-	{ .clk = &ck_pll4,	.con_id = "ck_pll4"	},
-	{ .clk = &ck_pll5,	.con_id = "ck_pll5"	},
-	{ .clk = &ck_pll3,	.con_id = "ck_pll3"	},
-	{ .clk = &vfp9_ck,	.con_id = "vfp9_ck"	},
-	{ .clk = &m2hclk_ck,	.con_id = "m2hclk_ck"	},
-	{ .clk = &hclk_ck,	.con_id = "hclk_ck"	},
-	{ .clk = &dma_ck,	.con_id = "dma_ck"	},
-	{ .clk = &flash_ck,	.con_id = "flash_ck"	},
-	{ .clk = &dum_ck,	.con_id = "dum_ck"	},
-	{ .clk = &keyscan_ck,	.con_id = "keyscan_ck"	},
-	{ .clk = &pwm1_ck,	.con_id = "pwm1_ck"	},
-	{ .clk = &pwm2_ck,	.con_id = "pwm2_ck"	},
-	{ .clk = &jpeg_ck,	.con_id = "jpeg_ck"	},
-	{ .clk = &ms_ck,	.con_id = "ms_ck"	},
-	{ .clk = &touch_ck,	.con_id = "touch_ck"	},
-	{ .clk = &i2c0_ck,	.dev_id = "pnx-i2c.0"	},
-	{ .clk = &i2c1_ck,	.dev_id = "pnx-i2c.1"	},
-	{ .clk = &i2c2_ck,	.dev_id = "pnx-i2c.2"	},
-	{ .clk = &spi0_ck,	.con_id = "spi0_ck"	},
-	{ .clk = &spi1_ck,	.con_id = "spi1_ck"	},
-	{ .clk = &uart3_ck,	.con_id = "uart3_ck"	},
-	{ .clk = &uart4_ck,	.con_id = "uart4_ck"	},
-	{ .clk = &uart5_ck,	.con_id = "uart5_ck"	},
-	{ .clk = &uart6_ck,	.con_id = "uart6_ck"	},
-	{ .clk = &wdt_ck,	.dev_id = "pnx4008-watchdog" },
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	if (WARN_ON(clk->usecount == 0))
-		return;
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
-			clk->set_rate(clk, 0);
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->usecount == 0) {
-		if (clk->parent) {
-			ret = local_clk_enable(clk->parent);
-			if (ret != 0)
-				goto out;
-		}
-
-		if (clk->enable)
-			ret = clk->enable(clk);
-		else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
-			    && clk->user_rate)
-			ret = clk->set_rate(clk, clk->user_rate);
-
-		if (ret != 0 && clk->parent) {
-			local_clk_disable(clk->parent);
-			goto out;
-		}
-
-		clk->usecount++;
-	}
-out:
-	return ret;
-}
-
-static int local_set_rate(struct clk *clk, u32 rate)
-{
-	int ret = -EINVAL;
-	if (clk->set_rate) {
-
-		if (clk->user_rate == clk->rate && clk->parent->rate) {
-			/* if clock enabled or rate not set */
-			clk->user_rate = clk->round_rate(clk, rate);
-			ret = clk->set_rate(clk, clk->user_rate);
-		} else
-			clk->user_rate = clk->round_rate(clk, rate);
-		ret = 0;
-	}
-	return ret;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk->flags & FIXED_RATE)
-		goto out;
-
-	clock_lock();
-	if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
-
-		clk->user_rate = clk->round_rate(clk, rate);
-		/* parent clock needs to be refreshed
-		   for the setting to take effect */
-	} else {
-		ret = local_set_rate(clk, rate);
-	}
-	ret = 0;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_rate);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long ret;
-	clock_lock();
-	ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_enable(struct clk *clk)
-{
-	int ret;
-
-	clock_lock();
-	ret = local_clk_enable(clk);
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	clock_lock();
-	local_clk_disable(clk);
-	clock_unlock();
-}
-
-EXPORT_SYMBOL(clk_disable);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret;
-	clock_lock();
-	if (clk->round_rate)
-		ret = clk->round_rate(clk, rate);
-	else
-		ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -ENODEV;
-	if (!clk->set_parent)
-		goto out;
-
-	clock_lock();
-	ret = clk->set_parent(clk, parent);
-	if (!ret)
-		clk->parent = parent;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_parent);
-
-static int __init clk_init(void)
-{
-	struct clk **clkp;
-
-	/* Disable autoclocking, as it doesn't seem to work */
-	__raw_writel(0xff, AUTOCLK_CTRL);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-		struct clk *clk = *clkp;
-		if (clk->flags & NEEDS_INITIALIZATION) {
-			if (clk->set_rate) {
-				clk->user_rate = clk->rate;
-				local_set_rate(clk, clk->user_rate);
-				if (clk->set_parent)
-					clk->set_parent(clk, clk->parent);
-			}
-			if (clk->enable && clk->usecount)
-				clk->enable(clk);
-			if (clk->disable && !clk->usecount)
-				clk->disable(clk);
-		}
-		pr_debug("%s: clock %s, rate %ld\n",
-			__func__, clk->name, clk->rate);
-	}
-
-	local_clk_enable(&ck_pll4);
-
-	/* if ck_13MHz is not used, disable it. */
-	if (ck_13MHz.usecount == 0)
-		local_clk_disable(&ck_13MHz);
-
-	/* Disable autoclocking */
-	__raw_writeb(0xff, AUTOCLK_CTRL);
-
-	clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
-
-	return 0;
-}
-
-arch_initcall(clk_init);
--- linux-2.6.orig/arch/arm/mach-pnx4008/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - internal header file
- *
- * Author: Vitaly Wool <source@xxxxxxxxxx>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
-#define __ARCH_ARM_PNX4008_CLOCK_H__
-
-struct clk {
-	const char *name;
-	struct clk *parent;
-	struct clk *propagate_next;
-	u32 rate;
-	u32 user_rate;
-	s8 usecount;
-	u32 flags;
-	u32 scale_reg;
-	u8 enable_shift;
-	u32 enable_reg;
-	u8 enable_shift1;
-	u32 enable_reg1;
-	u32 parent_switch_reg;
-	u32(*round_rate) (struct clk *, u32);
-	int (*set_rate) (struct clk *, u32);
-	int (*set_parent) (struct clk * clk, struct clk * parent);
-	int (*enable)(struct clk *);
-	void (*disable)(struct clk *);
-};
-
-/* Flags */
-#define RATE_PROPAGATES      (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE      (1<<2)
-#define FIXED_RATE           (1<<3)
-
-#endif
--- linux-2.6.orig/arch/arm/mach-pnx4008/core.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/core.c
- *
- * PNX4008 core startup code
- *
- * Authors: Vitaly Wool, Dmitry Chigirev,
- * Grigory Tolstolytkin, Dmitry Pervushin <source@xxxxxxxxxx>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/irq.h>
-#include <mach/clock.h>
-#include <mach/dma.h>
-
-struct resource spipnx_0_resources[] = {
-	{
-		.start = PNX4008_SPI1_BASE,
-		.end = PNX4008_SPI1_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI1_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI1_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	},
-};
-
-struct resource spipnx_1_resources[] = {
-	{
-		.start = PNX4008_SPI2_BASE,
-		.end = PNX4008_SPI2_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI2_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI2_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	}
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-	},
-};
-
-static struct platform_device spipnx_1 = {
-	.name = "spipnx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(spipnx_0_resources),
-	.resource = spipnx_0_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct platform_device spipnx_2 = {
-	.name = "spipnx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(spipnx_1_resources),
-	.resource = spipnx_1_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct plat_serial8250_port platform_serial_ports[] = {
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART5_BASE,
-		.irq = IIR5_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	},
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART3_BASE,
-		.irq = IIR3_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	 },
-	{}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = &platform_serial_ports,
-	},
-};
-
-static struct platform_device nand_flash_device = {
-	.name = "pnx4008-flash",
-	.id = -1,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
-		.end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_HOST_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name = "pnx4008-usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-static struct platform_device sdum_device = {
-	.name = "pnx4008-sdum",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct platform_device rgbfb_device = {
-	.name = "pnx4008-rgbfb",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-
-struct resource watchdog_resources[] = {
-	{
-		.start = PNX4008_WDOG_BASE,
-		.end = PNX4008_WDOG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&spipnx_1,
-	&spipnx_2,
-	&serial_device,
-	&ohci_device,
-	&nand_flash_device,
-	&sdum_device,
-	&rgbfb_device,
-	&watchdog_device,
-};
-
-
-extern void pnx4008_uart_init(void);
-
-static void __init pnx4008_init(void)
-{
-	/*disable all START interrupt sources,
-	   and clear all START interrupt flags */
-	__raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
-	__raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	/* Switch on the UART clocks */
-	pnx4008_uart_init();
-}
-
-static struct map_desc pnx4008_io_desc[] __initdata = {
-	{
-		.virtual 	= IO_ADDRESS(PNX4008_IRAM_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_IRAM_BASE),
-		.length		= SZ_64K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
-		.length		= SZ_1M - SZ_128K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
-		.length		= SZ_128K * 3,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_AHB2FAB_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_AHB2FAB_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	},
-};
-
-void __init pnx4008_map_io(void)
-{
-	iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
-}
-
-static void pnx4008_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-#ifdef CONFIG_PM
-extern int pnx4008_pm_init(void);
-#else
-static inline int pnx4008_pm_init(void) { return 0; }
-#endif
-
-void __init pnx4008_init_late(void)
-{
-	pnx4008_pm_init();
-}
-
-extern struct sys_timer pnx4008_timer;
-
-MACHINE_START(PNX4008, "Philips PNX4008")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset		= 0x100,
-	.map_io 		= pnx4008_map_io,
-	.init_irq 		= pnx4008_init_irq,
-	.init_machine 		= pnx4008_init,
-	.init_late		= pnx4008_init_late,
-	.timer 			= &pnx4008_timer,
-	.restart		= pnx4008_restart,
-MACHINE_END
--- linux-2.6.orig/arch/arm/mach-pnx4008/dma.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/dma.c
- *
- *  PNX4008 DMA registration and IRQ dispatching
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  Based on the code from Nicolas Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <asm/dma-mapping.h>
-#include <mach/clock.h>
-
-static struct dma_channel {
-	char *name;
-	void (*irq_handler) (int, int, void *);
-	void *data;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	void *target_addr;
-	int target_id;
-} dma_channels[MAX_DMA_CHANNELS];
-
-static struct ll_pool {
-	void *vaddr;
-	void *cur;
-	dma_addr_t dma_addr;
-	int count;
-} ll_pool;
-
-static DEFINE_SPINLOCK(ll_lock);
-
-struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
-{
-	struct pnx4008_dma_ll *ll = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ll_lock, flags);
-	if (ll_pool.count > 4) { /* can give one more */
-		ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
-		*ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
-		*(void **)ll_pool.cur = **(void ***)ll_pool.cur;
-		memset(ll, 0, sizeof(*ll));
-		ll_pool.count--;
-	}
-	spin_unlock_irqrestore(&ll_lock, flags);
-
-	return ll;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
-
-void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
-{
-	unsigned long flags;
-
-	if (ll) {
-		if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
-			printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
-			BUG();
-		}
-
-		if (ll->flags & DMA_BUFFER_ALLOCATED)
-			ll->free(ll->alloc_data);
-
-		spin_lock_irqsave(&ll_lock, flags);
-		*(long *)ll = *(long *)ll_pool.cur;
-		*(long *)ll_pool.cur = (long)ll;
-		ll_pool.count++;
-		spin_unlock_irqrestore(&ll_lock, flags);
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
-
-void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
-{
-	struct pnx4008_dma_ll *ptr;
-	u32 dma;
-
-	while (ll) {
-		dma = ll->next_dma;
-		ptr = ll->next;
-		pnx4008_free_ll_entry(ll, ll_dma);
-
-		ll_dma = dma;
-		ll = ptr;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll);
-
-static int dma_channels_requested = 0;
-
-static inline void dma_increment_usage(void)
-{
-	if (!dma_channels_requested++) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 1);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 1);
-	}
-}
-static inline void dma_decrement_usage(void)
-{
-	if (!--dma_channels_requested) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 0);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 0);
-
-	}
-}
-
-static DEFINE_SPINLOCK(dma_lock);
-
-static inline void pnx4008_dma_lock(void)
-{
-	spin_lock_irq(&dma_lock);
-}
-
-static inline void pnx4008_dma_unlock(void)
-{
-	spin_unlock_irq(&dma_lock);
-}
-
-#define VALID_CHANNEL(c)	(((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
-
-int pnx4008_request_channel(char *name, int ch,
-			    void (*irq_handler) (int, int, void *), void *data)
-{
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-
-	/* try grabbing a DMA channel with the requested priority */
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		if (!dma_channels[i].name && (ch == -1 || ch == i)) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		dma_increment_usage();
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-		dma_channels[i].ll = NULL;
-		dma_channels[i].ll_dma = 0;
-	} else {
-		printk(KERN_WARNING "No more available DMA channels for %s\n",
-		       name);
-		i = -ENODEV;
-	}
-
-	pnx4008_dma_unlock();
-	return i;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_request_channel);
-
-void pnx4008_free_channel(int ch)
-{
-	if (!dma_channels[ch].name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, ch);
-		return;
-	}
-
-	pnx4008_dma_lock();
-	pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
-	dma_channels[ch].ll = NULL;
-	dma_decrement_usage();
-
-	dma_channels[ch].name = NULL;
-	pnx4008_dma_unlock();
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_channel);
-
-int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
-{
-	unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
-
-	switch (ahb_m1_be) {
-	case 0:
-		dma_cfg &= ~(1 << 1);
-		break;
-	case 1:
-		dma_cfg |= (1 << 1);
-		break;
-	default:
-		break;
-	}
-
-	switch (ahb_m2_be) {
-	case 0:
-		dma_cfg &= ~(1 << 2);
-		break;
-	case 1:
-		dma_cfg |= (1 << 2);
-		break;
-	default:
-		break;
-	}
-
-	switch (enable) {
-	case 0:
-		dma_cfg &= ~(1 << 0);
-		break;
-	case 1:
-		dma_cfg |= (1 << 0);
-		break;
-	default:
-		break;
-	}
-
-	pnx4008_dma_lock();
-	__raw_writel(dma_cfg, DMAC_CONFIG);
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_dma);
-
-int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
-			     unsigned long *ctrl)
-{
-	int i = 0, dbsize, sbsize, err = 0;
-
-	if (!ctrl || !ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*ctrl = 0;
-
-	switch (ch_ctrl->tc_mask) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 31);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-
-	switch (ch_ctrl->cacheable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 30);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->bufferable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 29);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->priv_mode) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 28);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->di) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 27);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->si) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 26);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dest_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 25);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->src_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 24);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dwidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 21);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (1 << 21);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (2 << 21);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->swidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 18);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (1 << 18);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (2 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	dbsize = ch_ctrl->dbsize;
-	while (!(dbsize & 1)) {
-		i++;
-		dbsize >>= 1;
-	}
-	if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 15);
-	*ctrl |= (i << 15);
-
-	sbsize = ch_ctrl->sbsize;
-	while (!(sbsize & 1)) {
-		i++;
-		sbsize >>= 1;
-	}
-	if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 12);
-	*ctrl |= (i << 12);
-
-	if (ch_ctrl->tr_size > 0x7ff) {
-		err = -E2BIG;
-		goto out;
-	}
-	*ctrl &= ~0x7ff;
-	*ctrl |= ch_ctrl->tr_size & 0x7ff;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
-
-int pnx4008_dma_parse_control(unsigned long ctrl,
-			      struct pnx4008_dma_ch_ctrl * ch_ctrl)
-{
-	int err = 0;
-
-	if (!ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	ch_ctrl->tr_size = ctrl & 0x7ff;
-	ctrl >>= 12;
-
-	ch_ctrl->sbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->sbsize > 1)
-		ch_ctrl->sbsize <<= 1;
-	ctrl >>= 3;
-
-	ch_ctrl->dbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->dbsize > 1)
-		ch_ctrl->dbsize <<= 1;
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->swidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->swidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->swidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->dwidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->dwidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->dwidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	ch_ctrl->src_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->dest_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->si = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->di = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->priv_mode = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->bufferable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->cacheable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->tc_mask = ctrl & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
-
-int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
-			    unsigned long *cfg)
-{
-	int err = 0;
-
-	if (!cfg || !ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*cfg = 0;
-
-	switch (ch_cfg->halt) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->active) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 17);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->lock) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 16);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->itc) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 15);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->ie) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 14);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->flow_cntrl) {
-	case FC_MEM2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		break;
-	case FC_MEM2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (1 << 11);
-		break;
-	case FC_PER2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (2 << 11);
-		break;
-	case FC_PER2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (3 << 11);
-		break;
-	case FC_PER2PER_DPER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (4 << 11);
-		break;
-	case FC_MEM2PER_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (5 << 11);
-		break;
-	case FC_PER2MEM_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (6 << 11);
-		break;
-	case FC_PER2PER_SPER:
-		*cfg |= (7 << 11);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	*cfg &= ~(0x1f << 6);
-	*cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
-
-	*cfg &= ~(0x1f << 1);
-	*cfg |= ((ch_cfg->src_per & 0x1f) << 1);
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
-
-int pnx4008_dma_parse_config(unsigned long cfg,
-			     struct pnx4008_dma_ch_config * ch_cfg)
-{
-	int err = 0;
-
-	if (!ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	cfg >>= 1;
-
-	ch_cfg->src_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	ch_cfg->dest_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	switch (cfg & 7) {
-	case 0:
-		ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
-		break;
-	case 1:
-		ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
-		break;
-	case 2:
-		ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
-		break;
-	case 3:
-		ch_cfg->flow_cntrl = FC_PER2PER_DMA;
-		break;
-	case 4:
-		ch_cfg->flow_cntrl = FC_PER2PER_DPER;
-		break;
-	case 5:
-		ch_cfg->flow_cntrl = FC_MEM2PER_PER;
-		break;
-	case 6:
-		ch_cfg->flow_cntrl = FC_PER2MEM_PER;
-		break;
-	case 7:
-		ch_cfg->flow_cntrl = FC_PER2PER_SPER;
-	}
-	cfg >>= 3;
-
-	ch_cfg->ie = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->itc = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->lock = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->active = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->halt = cfg & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
-
-void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
-				  struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		config->ch_ctrl &= ~0x7ff;
-		config->ch_ctrl |= new_len;
-		if (!config->is_ll) {
-			config->is_ll = 1;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = config->ll;
-			unsigned long ll_dma_old = config->ll_dma;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		config->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
-
-void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
-				struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		cur_ll->ch_ctrl &= ~0x7ff;
-		cur_ll->ch_ctrl |= new_len;
-		if (!cur_ll->next) {
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = cur_ll->next;
-			unsigned long ll_dma_old = cur_ll->next_dma;
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		cur_ll->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
-
-int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	__raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
-	__raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
-
-	if (config->is_ll)
-		__raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
-	else
-		__raw_writel(0, DMAC_Cx_LLI(ch));
-
-	__raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
-	__raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_channel);
-
-int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
-
-	config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
-	config->is_ll = config->ll_dma ? 1 : 0;
-
-	config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
-	config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
-
-int pnx4008_dma_ch_enable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg |= 1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
-
-int pnx4008_dma_ch_disable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg &= ~1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
-
-int pnx4008_dma_ch_enabled(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return ch_cfg & 1;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i;
-	unsigned long dint = __raw_readl(DMAC_INT_STAT);
-	unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
-	unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
-	unsigned long i_bit;
-
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		i_bit = 1 << i;
-		if (dint & i_bit) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			if (channel->name && channel->irq_handler) {
-				int cause = 0;
-
-				if (eint & i_bit)
-					cause |= DMA_ERR_INT;
-				if (tcint & i_bit)
-					cause |= DMA_TC_INT;
-				channel->irq_handler(i, cause, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-			if (tcint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_TC_CLEAR);
-			if (eint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init pnx4008_dma_init(void)
-{
-	int ret, i;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		goto out;
-	}
-
-	ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
-	ll_pool.cur = ll_pool.vaddr =
-	    dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
-			       &ll_pool.dma_addr, GFP_KERNEL);
-
-	if (!ll_pool.vaddr) {
-		ret = -ENOMEM;
-		free_irq(DMA_INT, NULL);
-		goto out;
-	}
-
-	for (i = 0; i < ll_pool.count - 1; i++) {
-		void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
-		*addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
-	}
-	*(long *)(ll_pool.vaddr +
-		  (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
-	    (long)ll_pool.vaddr;
-
-	__raw_writel(1, DMAC_CONFIG);
-
-out:
-	return ret;
-}
-arch_initcall(pnx4008_dma_init);
--- linux-2.6.orig/arch/arm/mach-pnx4008/gpio.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/gpio.c
- *
- * PNX4008 GPIO driver
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/gpio-pnx4008.h>
-
-/* register definitions */
-#define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
-
-#define PIO_INP_STATE	(0x00U)
-#define PIO_OUTP_SET	(0x04U)
-#define PIO_OUTP_CLR	(0x08U)
-#define PIO_OUTP_STATE	(0x0CU)
-#define PIO_DRV_SET	(0x10U)
-#define PIO_DRV_CLR	(0x14U)
-#define PIO_DRV_STATE	(0x18U)
-#define PIO_SDINP_STATE	(0x1CU)
-#define PIO_SDOUTP_SET	(0x20U)
-#define PIO_SDOUTP_CLR	(0x24U)
-#define PIO_MUX_SET	(0x28U)
-#define PIO_MUX_CLR	(0x2CU)
-#define PIO_MUX_STATE	(0x30U)
-
-static inline void gpio_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void gpio_unlock(void)
-{
-	local_irq_enable();
-}
-
-/* Inline functions */
-static inline int gpio_read_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		ret = (val & bit) ? 1 : 0;
-	}
-out:
-	return ret;
-}
-
-static inline int gpio_set_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		val |= bit;
-		__raw_writel(val, PIO_VA_BASE + reg);
-		ret = 0;
-	}
-out:
-	return ret;
-}
-
-/* Very simple access control, bitmap for allocated/free */
-static unsigned long access_map[4];
-#define INP_INDEX	0
-#define OUTP_INDEX	1
-#define GPIO_INDEX	2
-#define MUX_INDEX	3
-
-/*GPIO to Input Mapping */
-static short gpio_to_inp_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, 10, 11, 12, 13, 14, 24, -1
-};
-
-/*GPIO to Mux Mapping */
-static short gpio_to_mux_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, 0, 1, 4, 5, -1
-};
-
-/*Output to Mux Mapping */
-static short outp_to_mux_map[32] = {
-	-1, -1, -1, 6, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, 2, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1
-};
-
-int pnx4008_gpio_register_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EBUSY;	/* Already in use */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISRAM(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISMUX(pin)) {
-		if (access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] |= bit;
-
-	} else if (GPIO_ISOUT(pin)) {
-		if (access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] |= bit;
-
-	} else if (GPIO_ISIN(pin)) {
-		if (access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] |= bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_register_pin);
-
-int pnx4008_gpio_unregister_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EFAULT;	/* Not registered */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISRAM(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISMUX(pin)) {
-		if (~access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] &= ~bit;
-	} else if (GPIO_ISOUT(pin)) {
-		if (~access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] &= ~bit;
-	} else if (GPIO_ISIN(pin)) {
-		if (~access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] &= ~bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
-
-unsigned long pnx4008_gpio_read_pin(unsigned short pin)
-{
-	unsigned long ret = -EFAULT;
-	int gpio = GPIO_BIT_MASK(pin);
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
-			ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
-		}
-	} else if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-		if (ret > 0)
-			ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-		else if (ret == 0)
-			ret =
-			    gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
-	} else if (GPIO_ISIN(pin)) {
-		ret = gpio_read_bit(PIO_INP_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin);
-
-/* Write Value to output */
-int pnx4008_gpio_write_pin(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		printk( "writing '%x' to '%x'\n",
-				gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
-		ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
-					   PIO_SDOUTP_CLR, gpio);
-	} else if (GPIO_ISBID(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_OUTP_SET :
-					   PIO_OUTP_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_write_pin);
-
-/* Value = 1 : Set GPIO pin as output */
-/* Value = 0 : Set GPIO pin as input */
-int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
-
-/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
-int pnx4008_gpio_read_pin_direction(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
-
-/* Value = 1 : Set pin to muxed function  */
-/* Value = 0 : Set pin as GPIO */
-int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
-
-/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
-int pnx4008_gpio_read_pin_mux(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
--- linux-2.6.orig/arch/arm/mach-pnx4008/i2c.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@xxxxxxxxx>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-static struct resource i2c0_resources[] = {
-	{
-		.start = PNX4008_I2C1_BASE,
-		.end = PNX4008_I2C1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_1_INT,
-		.end = I2C_1_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	{
-		.start = PNX4008_I2C2_BASE,
-		.end = PNX4008_I2C2_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_2_INT,
-		.end = I2C_2_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	{
-		.start = PNX4008_USB_CONFIG_BASE + 0x300,
-		.end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_I2C_INT,
-		.end = USB_I2C_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name = "pnx-i2c.0",
-	.id = 0,
-	.resource = i2c0_resources,
-	.num_resources = ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name = "pnx-i2c.1",
-	.id = 1,
-	.resource = i2c1_resources,
-	.num_resources = ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
-	.name = "pnx-i2c.2",
-	.id = 2,
-	.resource = i2c2_resources,
-	.num_resources = ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
--- linux-2.6.orig/arch/arm/mach-pnx4008/i2c.c.orig
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@xxxxxxxxx>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-#include <mach/i2c.h>
-
-static struct resource i2c0_resources[] = {
-	{
-		.start = PNX4008_I2C1_BASE,
-		.end = PNX4008_I2C1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_1_INT,
-		.end = I2C_1_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	{
-		.start = PNX4008_I2C2_BASE,
-		.end = PNX4008_I2C2_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_2_INT,
-		.end = I2C_2_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	{
-		.start = PNX4008_USB_CONFIG_BASE + 0x300,
-		.end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_I2C_INT,
-		.end = USB_I2C_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name = "pnx-i2c",
-	.id = 0,
-	.resource = i2c0_resources,
-	.num_resources = ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name = "pnx-i2c",
-	.id = 1,
-	.resource = i2c1_resources,
-	.num_resources = ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
-	.name = "pnx-i2c",
-	.id = 2,
-	.resource = i2c2_resources,
-	.num_resources = ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00090000
-		add	\rv, \rp, #0xf4000000	@ virtual
-		add	\rp, \rp, #0x40000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/dma.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@xxxxxxxxxxxxx>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define HZ 100
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
--- linux-2.6.orig/arch/arm/mach-pnx4008/irq.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/irq.c
- *
- * PNX4008 IRQ controller driver
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irq.h>
-
-static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
-
-static void pnx4008_mask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-}
-
-static void pnx4008_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq));	/* unmask interrupt */
-}
-
-static void pnx4008_mask_ack_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-	__raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq));	/* clear interrupt status */
-}
-
-static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/*rising edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*falling edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*low level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/* high level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-
-	/* IRQ_TYPE_EDGE_BOTH is not supported */
-	default:
-		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
-		return -1;
-	}
-	return 0;
-}
-
-static struct irq_chip pnx4008_irq_chip = {
-	.irq_ack = pnx4008_mask_ack_irq,
-	.irq_mask = pnx4008_mask_irq,
-	.irq_unmask = pnx4008_unmask_irq,
-	.irq_set_type = pnx4008_set_irq_type,
-};
-
-void __init pnx4008_init_irq(void)
-{
-	unsigned int i;
-
-	/* configure IRQ's */
-	for (i = 0; i < NR_IRQS; i++) {
-		set_irq_flags(i, IRQF_VALID);
-		irq_set_chip(i, &pnx4008_irq_chip);
-		pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]);
-	}
-
-	/* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N),
-			     pnx4008_irq_type[SUB1_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N),
-			     pnx4008_irq_type[SUB2_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N),
-			     pnx4008_irq_type[SUB1_FIQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N),
-			     pnx4008_irq_type[SUB2_FIQ_N]);
-
-	/* mask all others */
-	__raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
-			(1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
-		INTC_ER(MAIN_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC1_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC2_BASE_INT));
-}
-
--- linux-2.6.orig/arch/arm/mach-pnx4008/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/pm.c
- *
- * Power Management driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pm.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/suspend.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-#include <mach/clock.h>
-
-#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
-
-static void *saved_sram;
-
-static struct clk *pll4_clk;
-
-static inline void pnx4008_standby(void)
-{
-	void (*pnx4008_cpu_standby_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
-
-	/*do suspend */
-	pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_standby_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static inline void pnx4008_suspend(void)
-{
-	void (*pnx4008_cpu_suspend_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
-
-	/*do suspend */
-	pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_suspend_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int pnx4008_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pnx4008_standby();
-		break;
-	case PM_SUSPEND_MEM:
-		pnx4008_suspend();
-		break;
-	}
-	return 0;
-}
-
-static int pnx4008_pm_valid(suspend_state_t state)
-{
-	return (state == PM_SUSPEND_STANDBY) ||
-	       (state == PM_SUSPEND_MEM);
-}
-
-static const struct platform_suspend_ops pnx4008_pm_ops = {
-	.enter = pnx4008_pm_enter,
-	.valid = pnx4008_pm_valid,
-};
-
-int __init pnx4008_pm_init(void)
-{
-	u32 sram_size_to_allocate;
-
-	pll4_clk = clk_get(0, "ck_pll4");
-	if (IS_ERR(pll4_clk)) {
-		printk(KERN_ERR
-		       "PM Suspend cannot acquire ARM(PLL4) clock control\n");
-		return PTR_ERR(pll4_clk);
-	}
-
-	if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
-		sram_size_to_allocate = pnx4008_cpu_standby_sz;
-	else
-		sram_size_to_allocate = pnx4008_cpu_suspend_sz;
-
-	saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
-	if (!saved_sram) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion of SRAM\n");
-		clk_put(pll4_clk);
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&pnx4008_pm_ops);
-	return 0;
-}
--- linux-2.6.orig/arch/arm/mach-pnx4008/serial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/serial.c
- *
- *  PNX4008 UART initialization
- *
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <mach/gpio-pnx4008.h>
-#include <mach/clock.h>
-
-#define UART_3		0
-#define UART_4		1
-#define UART_5		2
-#define UART_6		3
-#define UART_UNKNOWN	(-1)
-
-#define UART3_BASE_VA	IO_ADDRESS(PNX4008_UART3_BASE)
-#define UART4_BASE_VA	IO_ADDRESS(PNX4008_UART4_BASE)
-#define UART5_BASE_VA	IO_ADDRESS(PNX4008_UART5_BASE)
-#define UART6_BASE_VA	IO_ADDRESS(PNX4008_UART6_BASE)
-
-#define UART_FCR_OFFSET		8
-#define UART_FIFO_SIZE		64
-
-void pnx4008_uart_init(void)
-{
-	u32 tmp;
-	int i = UART_FIFO_SIZE;
-
-	__raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* Send a NULL to fix the UART HW bug */
-	__raw_writel(0x00, UART5_BASE_VA);
-	__raw_writel(0x00, UART3_BASE_VA);
-
-	while (i--) {
-		tmp = __raw_readl(UART5_BASE_VA);
-		tmp = __raw_readl(UART3_BASE_VA);
-	}
-	__raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* setup wakeup interrupt */
-	start_int_set_rising_edge(SE_U3_RX_INT);
-	start_int_ack(SE_U3_RX_INT);
-	start_int_umask(SE_U3_RX_INT);
-
-	start_int_set_rising_edge(SE_U5_RX_INT);
-	start_int_ack(SE_U5_RX_INT);
-	start_int_umask(SE_U5_RX_INT);
-}
-
--- linux-2.6.orig/arch/arm/mach-pnx4008/sleep.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/sleep.S
- *
- * PNX4008 support for STOP mode and SDRAM self-refresh
- *
- * Authors: Dmitry Chigirev, Vitaly Wool <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define PWR_CTRL_REG_OFFS 0x44
-
-#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
-#define MPMC_STATUS_REG_OFFS 0x4
-
-		.text
-
-ENTRY(pnx4008_cpu_suspend)
-	@this function should be entered in Direct run mode.
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ to prepare SDRAM to get out of self-refresh mode after wakeup
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do enter stop mode
-	orr	r5, r5, #(1 << 0)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	@ sleeping now...
-
-	@ coming out of STOP mode into Direct Run mode
-	@ clear STOP mode and SDRAM self-refresh bits
-	str	r1, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_suspend_sz)
-	.word	. - pnx4008_cpu_suspend
-
-ENTRY(pnx4008_cpu_standby)
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ set 'get out of self-refresh mode after wakeup' bit
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	mcr     p15, 0, r0, c7, c0, 4	@ kinda sleeping now...
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_standby_sz)
-	.word	. - pnx4008_cpu_standby
-
-ENTRY(pnx4008_cache_clean_invalidate)
-	stmfd	sp!, {r0 - r6, lr}
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test,clean,invalidate
-	bne     1b
-#endif
-	ldmfd   sp!, {r0 - r6, pc}
--- linux-2.6.orig/arch/arm/mach-pnx4008/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/time.c
- *
- * PNX4008 Timers
- *
- * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach/time.h>
-#include <asm/errno.h>
-
-#include "time.h"
-
-/*! Note: all timers are UPCOUNTING */
-
-/*!
- * Returns number of us since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long pnx4008_gettimeoffset(void)
-{
-	u32 ticks_to_match =
-	    __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
-	u32 elapsed = LATCH - ticks_to_match;
-	return (elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*!
- * IRQ handler for the timer
- */
-static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
-{
-	if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
-
-		do {
-			timer_tick();
-
-			/*
-			 * this algorithm takes care of possible delay
-			 * for this interrupt handling longer than a normal
-			 * timer period
-			 */
-			__raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
-				     HSTIM_MATCH0);
-			__raw_writel(MATCH0_INT, HSTIM_INT);	/* clear interrupt */
-
-			/*
-			 * The goal is to keep incrementing HSTIM_MATCH0
-			 * register until HSTIM_MATCH0 indicates time after
-			 * what HSTIM_COUNTER indicates.
-			 */
-		} while ((signed)
-			 (__raw_readl(HSTIM_MATCH0) -
-			  __raw_readl(HSTIM_COUNTER)) < 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pnx4008_timer_irq = {
-	.name = "PNX4008 Tick Timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = pnx4008_timer_interrupt
-};
-
-/*!
- * Set up timer and timer interrupt.
- */
-static __init void pnx4008_setup_timer(void)
-{
-	__raw_writel(RESET_COUNT, MSTIM_CTRL);
-	while (__raw_readl(MSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, MSTIM_CTRL);	/* stop the timer */
-	__raw_writel(0, MSTIM_MCTRL);
-
-	__raw_writel(RESET_COUNT, HSTIM_CTRL);
-	while (__raw_readl(HSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, HSTIM_CTRL);
-	__raw_writel(0, HSTIM_MCTRL);
-	__raw_writel(0, HSTIM_CCR);
-	__raw_writel(12, HSTIM_PMATCH);	/* scale down to 1 MHZ */
-	__raw_writel(LATCH, HSTIM_MATCH0);
-	__raw_writel(MR0_INT, HSTIM_MCTRL);
-
-	setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
-
-	__raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL);	/*start timer, stop when JTAG active */
-}
-
-/* Timer Clock Control in PM register */
-#define TIMCLK_CTRL_REG  IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
-#define WATCHDOG_CLK_EN                   1
-#define TIMER_CLK_EN                      2	/* HS and MS timers? */
-
-static u32 timclk_ctrl_reg_save;
-
-void pnx4008_timer_suspend(void)
-{
-	timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
-	__raw_writel(0, TIMCLK_CTRL_REG);	/* disable timers */
-}
-
-void pnx4008_timer_resume(void)
-{
-	__raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG);	/* enable timers */
-}
-
-struct sys_timer pnx4008_timer = {
-	.init = pnx4008_setup_timer,
-	.offset = pnx4008_gettimeoffset,
-	.suspend = pnx4008_timer_suspend,
-	.resume = pnx4008_timer_resume,
-};
-
--- linux-2.6.orig/arch/arm/mach-pnx4008/time.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@xxxxxxxxxx>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef PNX_TIME_H
-#define PNX_TIME_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif
--- linux-2.6.orig/arch/arm/tools/mach-types
+++ linux-2.6/arch/arm/tools/mach-types
@@ -158,7 +158,6 @@ edb9315a		MACH_EDB9315A		EDB9315A		772
 stargate2		MACH_STARGATE2		STARGATE2		774
 intelmote2		MACH_INTELMOTE2		INTELMOTE2		775
 trizeps4		MACH_TRIZEPS4		TRIZEPS4		776
-pnx4008			MACH_PNX4008		PNX4008			782
 cpuat91			MACH_CPUAT91		CPUAT91			787
 iq81340sc		MACH_IQ81340SC		IQ81340SC		799
 iq81340mc		MACH_IQ81340MC		IQ81340MC		801
--- linux-2.6.orig/drivers/i2c/busses/Kconfig
+++ linux-2.6/drivers/i2c/busses/Kconfig
@@ -545,7 +545,7 @@ config I2C_PMCMSP
 
 config I2C_PNX
 	tristate "I2C bus support for Philips PNX and NXP LPC targets"
-	depends on ARCH_PNX4008 || ARCH_LPC32XX
+	depends on ARCH_LPC32XX
 	help
 	  This driver supports the Philips IP3204 I2C IP block master and/or
 	  slave controller
--- linux-2.6.orig/drivers/usb/Kconfig
+++ linux-2.6/drivers/usb/Kconfig
@@ -13,7 +13,6 @@ config USB_ARCH_HAS_OHCI
 	default y if PXA3xx
 	default y if ARCH_EP93XX
 	default y if ARCH_AT91
-	default y if ARCH_PNX4008
 	default y if MFD_TC6393XB
 	default y if ARCH_W90X900
 	default y if ARCH_DAVINCI_DA8XX
--- linux-2.6.orig/drivers/usb/host/Kconfig
+++ linux-2.6/drivers/usb/host/Kconfig
@@ -292,7 +292,7 @@ config USB_OHCI_HCD
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
 	select USB_OTG_UTILS if ARCH_OMAP
-	select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008
+	select USB_ISP1301 if ARCH_LPC32XX
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
--- linux-2.6.orig/drivers/usb/host/ohci-hcd.c
+++ linux-2.6/drivers/usb/host/ohci-hcd.c
@@ -1049,7 +1049,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_at91_driver
 #endif
 
-#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX)
+#ifdef CONFIG_ARCH_LPC32XX
 #include "ohci-nxp.c"
 #define PLATFORM_DRIVER		usb_hcd_nxp_driver
 #endif
--- linux-2.6.orig/drivers/usb/host/ohci-nxp.c
+++ linux-2.6/drivers/usb/host/ohci-nxp.c
@@ -2,7 +2,6 @@
  * driver for NXP USB Host devices
  *
  * Currently supported OHCI host devices:
- * - Philips PNX4008
  * - NXP LPC32xx
  *
  * Authors: Dmitry Chigirev <source@xxxxxxxxxx>
@@ -66,38 +65,6 @@ static struct clk *usb_pll_clk;
 static struct clk *usb_dev_clk;
 static struct clk *usb_otg_clk;
 
-static void isp1301_configure_pnx4008(void)
-{
-	/* PNX4008 only supports DAT_SE0 USB mode */
-	/* PNX4008 R2A requires setting the MAX603 to output 3.6V */
-	/* Power up externel charge-pump */
-
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG);
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
-		~(MC1_DAT_SE0 | MC1_SPEED_REG));
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_MODE_CONTROL_2,
-		MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL);
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
-		~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
-		~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF);
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
-		0xFF);
-	i2c_smbus_write_byte_data(isp1301_i2c_client,
-		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR,
-		0xFF);
-}
-
 static void isp1301_configure_lpc32xx(void)
 {
 	/* LPC32XX only supports DAT_SE0 USB mode */
@@ -149,10 +116,7 @@ static void isp1301_configure_lpc32xx(vo
 
 static void isp1301_configure(void)
 {
-	if (machine_is_pnx4008())
-		isp1301_configure_pnx4008();
-	else
-		isp1301_configure_lpc32xx();
+	isp1301_configure_lpc32xx();
 }
 
 static inline void isp1301_vbus_on(void)
@@ -241,47 +205,6 @@ static const struct hc_driver ohci_nxp_h
 	.start_port_reset = ohci_start_port_reset,
 };
 
-static void nxp_set_usb_bits(void)
-{
-	if (machine_is_pnx4008()) {
-		start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
-		start_int_ack(SE_USB_OTG_ATX_INT_N);
-		start_int_umask(SE_USB_OTG_ATX_INT_N);
-
-		start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
-		start_int_ack(SE_USB_OTG_TIMER_INT);
-		start_int_umask(SE_USB_OTG_TIMER_INT);
-
-		start_int_set_rising_edge(SE_USB_I2C_INT);
-		start_int_ack(SE_USB_I2C_INT);
-		start_int_umask(SE_USB_I2C_INT);
-
-		start_int_set_rising_edge(SE_USB_INT);
-		start_int_ack(SE_USB_INT);
-		start_int_umask(SE_USB_INT);
-
-		start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
-		start_int_ack(SE_USB_NEED_CLK_INT);
-		start_int_umask(SE_USB_NEED_CLK_INT);
-
-		start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
-		start_int_ack(SE_USB_AHB_NEED_CLK_INT);
-		start_int_umask(SE_USB_AHB_NEED_CLK_INT);
-	}
-}
-
-static void nxp_unset_usb_bits(void)
-{
-	if (machine_is_pnx4008()) {
-		start_int_mask(SE_USB_OTG_ATX_INT_N);
-		start_int_mask(SE_USB_OTG_TIMER_INT);
-		start_int_mask(SE_USB_I2C_INT);
-		start_int_mask(SE_USB_INT);
-		start_int_mask(SE_USB_NEED_CLK_INT);
-		start_int_mask(SE_USB_AHB_NEED_CLK_INT);
-	}
-}
-
 static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = 0;
@@ -376,9 +299,6 @@ static int __devinit usb_hcd_nxp_probe(s
 		goto out8;
 	}
 
-	/* Set all USB bits in the Start Enable register */
-	nxp_set_usb_bits();
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Failed to get MEM resource\n");
@@ -413,7 +333,6 @@ static int __devinit usb_hcd_nxp_probe(s
 
 	nxp_stop_hc();
 out8:
-	nxp_unset_usb_bits();
 	usb_put_hcd(hcd);
 out7:
 	clk_disable(usb_otg_clk);
@@ -441,7 +360,6 @@ static int usb_hcd_nxp_remove(struct pla
 	nxp_stop_hc();
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-	nxp_unset_usb_bits();
 	clk_disable(usb_pll_clk);
 	clk_put(usb_pll_clk);
 	clk_disable(usb_dev_clk);
--- linux-2.6.orig/drivers/video/Kconfig
+++ linux-2.6/drivers/video/Kconfig
@@ -2151,21 +2151,6 @@ config FB_UDL
 	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
 	  To compile as a module, choose M here: the module name is udlfb.
 
-config FB_PNX4008_DUM
-	tristate "Display Update Module support on Philips PNX4008 board"
-	depends on FB && ARCH_PNX4008
-	---help---
-	  Say Y here to enable support for PNX4008 Display Update Module (DUM)
-
-config FB_PNX4008_DUM_RGB
-	tristate "RGB Framebuffer support on Philips PNX4008 board"
-	depends on FB_PNX4008_DUM
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here to enable support for PNX4008 RGB Framebuffer
-
 config FB_IBM_GXT4500
 	tristate "Framebuffer support for IBM GXT4500P adaptor"
 	depends on FB && PPC
--- linux-2.6.orig/drivers/video/Makefile
+++ linux-2.6/drivers/video/Makefile
@@ -128,8 +128,6 @@ obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
 obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
 obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
 obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
-obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
-obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
--- linux-2.6.orig/drivers/video/pnx4008/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the new PNX4008 framebuffer device driver
-#
-
-obj-$(CONFIG_FB_PNX4008_DUM) += sdum.o
-obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnxrgbfb.o
-
--- linux-2.6.orig/drivers/video/pnx4008/dum.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * linux/drivers/video/pnx4008/dum.h
- *
- * Internal header for SDUM
- *
- * 2005 (c) Koninklijke Philips N.V. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX008_DUM_H__
-#define __PNX008_DUM_H__
-
-#include <mach/platform.h>
-
-#define PNX4008_DUMCONF_VA_BASE		IO_ADDRESS(PNX4008_DUMCONF_BASE)
-#define PNX4008_DUM_MAIN_VA_BASE	IO_ADDRESS(PNX4008_DUM_MAINCFG_BASE)
-
-/* DUM CFG ADDRESSES */
-#define DUM_CH_BASE_ADR		(PNX4008_DUMCONF_VA_BASE + 0x00)
-#define DUM_CH_MIN_ADR		(PNX4008_DUMCONF_VA_BASE + 0x00)
-#define DUM_CH_MAX_ADR		(PNX4008_DUMCONF_VA_BASE + 0x04)
-#define DUM_CH_CONF_ADR		(PNX4008_DUMCONF_VA_BASE + 0x08)
-#define DUM_CH_STAT_ADR		(PNX4008_DUMCONF_VA_BASE + 0x0C)
-#define DUM_CH_CTRL_ADR		(PNX4008_DUMCONF_VA_BASE + 0x10)
-
-#define CH_MARG		(0x100 / sizeof(u32))
-#define DUM_CH_MIN(i)	(*((volatile u32 *)DUM_CH_MIN_ADR + (i) * CH_MARG))
-#define DUM_CH_MAX(i)	(*((volatile u32 *)DUM_CH_MAX_ADR + (i) * CH_MARG))
-#define DUM_CH_CONF(i)	(*((volatile u32 *)DUM_CH_CONF_ADR + (i) * CH_MARG))
-#define DUM_CH_STAT(i)	(*((volatile u32 *)DUM_CH_STAT_ADR + (i) * CH_MARG))
-#define DUM_CH_CTRL(i)	(*((volatile u32 *)DUM_CH_CTRL_ADR + (i) * CH_MARG))
-
-#define DUM_CONF_ADR          (PNX4008_DUM_MAIN_VA_BASE + 0x00)
-#define DUM_CTRL_ADR          (PNX4008_DUM_MAIN_VA_BASE + 0x04)
-#define DUM_STAT_ADR          (PNX4008_DUM_MAIN_VA_BASE + 0x08)
-#define DUM_DECODE_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x0C)
-#define DUM_COM_BASE_ADR      (PNX4008_DUM_MAIN_VA_BASE + 0x10)
-#define DUM_SYNC_C_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x14)
-#define DUM_CLK_DIV_ADR       (PNX4008_DUM_MAIN_VA_BASE + 0x18)
-#define DUM_DIRTY_LOW_ADR     (PNX4008_DUM_MAIN_VA_BASE + 0x20)
-#define DUM_DIRTY_HIGH_ADR    (PNX4008_DUM_MAIN_VA_BASE + 0x24)
-#define DUM_FORMAT_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x28)
-#define DUM_WTCFG1_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x30)
-#define DUM_RTCFG1_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x34)
-#define DUM_WTCFG2_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x38)
-#define DUM_RTCFG2_ADR        (PNX4008_DUM_MAIN_VA_BASE + 0x3C)
-#define DUM_TCFG_ADR          (PNX4008_DUM_MAIN_VA_BASE + 0x40)
-#define DUM_OUTP_FORMAT1_ADR  (PNX4008_DUM_MAIN_VA_BASE + 0x44)
-#define DUM_OUTP_FORMAT2_ADR  (PNX4008_DUM_MAIN_VA_BASE + 0x48)
-#define DUM_SYNC_MODE_ADR     (PNX4008_DUM_MAIN_VA_BASE + 0x4C)
-#define DUM_SYNC_OUT_C_ADR    (PNX4008_DUM_MAIN_VA_BASE + 0x50)
-
-#define DUM_CONF              (*(volatile u32 *)(DUM_CONF_ADR))
-#define DUM_CTRL              (*(volatile u32 *)(DUM_CTRL_ADR))
-#define DUM_STAT              (*(volatile u32 *)(DUM_STAT_ADR))
-#define DUM_DECODE            (*(volatile u32 *)(DUM_DECODE_ADR))
-#define DUM_COM_BASE          (*(volatile u32 *)(DUM_COM_BASE_ADR))
-#define DUM_SYNC_C            (*(volatile u32 *)(DUM_SYNC_C_ADR))
-#define DUM_CLK_DIV           (*(volatile u32 *)(DUM_CLK_DIV_ADR))
-#define DUM_DIRTY_LOW         (*(volatile u32 *)(DUM_DIRTY_LOW_ADR))
-#define DUM_DIRTY_HIGH        (*(volatile u32 *)(DUM_DIRTY_HIGH_ADR))
-#define DUM_FORMAT            (*(volatile u32 *)(DUM_FORMAT_ADR))
-#define DUM_WTCFG1            (*(volatile u32 *)(DUM_WTCFG1_ADR))
-#define DUM_RTCFG1            (*(volatile u32 *)(DUM_RTCFG1_ADR))
-#define DUM_WTCFG2            (*(volatile u32 *)(DUM_WTCFG2_ADR))
-#define DUM_RTCFG2            (*(volatile u32 *)(DUM_RTCFG2_ADR))
-#define DUM_TCFG              (*(volatile u32 *)(DUM_TCFG_ADR))
-#define DUM_OUTP_FORMAT1      (*(volatile u32 *)(DUM_OUTP_FORMAT1_ADR))
-#define DUM_OUTP_FORMAT2      (*(volatile u32 *)(DUM_OUTP_FORMAT2_ADR))
-#define DUM_SYNC_MODE         (*(volatile u32 *)(DUM_SYNC_MODE_ADR))
-#define DUM_SYNC_OUT_C        (*(volatile u32 *)(DUM_SYNC_OUT_C_ADR))
-
-/* DUM SLAVE ADDRESSES */
-#define DUM_SLAVE_WRITE_ADR      (PNX4008_DUM_MAINCFG_BASE + 0x0000000)
-#define DUM_SLAVE_READ1_I_ADR    (PNX4008_DUM_MAINCFG_BASE + 0x1000000)
-#define DUM_SLAVE_READ1_R_ADR    (PNX4008_DUM_MAINCFG_BASE + 0x1000004)
-#define DUM_SLAVE_READ2_I_ADR    (PNX4008_DUM_MAINCFG_BASE + 0x1000008)
-#define DUM_SLAVE_READ2_R_ADR    (PNX4008_DUM_MAINCFG_BASE + 0x100000C)
-
-#define DUM_SLAVE_WRITE_W  ((volatile u32 *)(DUM_SLAVE_WRITE_ADR))
-#define DUM_SLAVE_WRITE_HW ((volatile u16 *)(DUM_SLAVE_WRITE_ADR))
-#define DUM_SLAVE_READ1_I  ((volatile u8 *)(DUM_SLAVE_READ1_I_ADR))
-#define DUM_SLAVE_READ1_R  ((volatile u16 *)(DUM_SLAVE_READ1_R_ADR))
-#define DUM_SLAVE_READ2_I  ((volatile u8 *)(DUM_SLAVE_READ2_I_ADR))
-#define DUM_SLAVE_READ2_R  ((volatile u16 *)(DUM_SLAVE_READ2_R_ADR))
-
-/* Sony display register addresses */
-#define DISP_0_REG            (0x00)
-#define DISP_1_REG            (0x01)
-#define DISP_CAL_REG          (0x20)
-#define DISP_ID_REG           (0x2A)
-#define DISP_XMIN_L_REG       (0x30)
-#define DISP_XMIN_H_REG       (0x31)
-#define DISP_YMIN_REG         (0x32)
-#define DISP_XMAX_L_REG       (0x34)
-#define DISP_XMAX_H_REG       (0x35)
-#define DISP_YMAX_REG         (0x36)
-#define DISP_SYNC_EN_REG      (0x38)
-#define DISP_SYNC_RISE_L_REG  (0x3C)
-#define DISP_SYNC_RISE_H_REG  (0x3D)
-#define DISP_SYNC_FALL_L_REG  (0x3E)
-#define DISP_SYNC_FALL_H_REG  (0x3F)
-#define DISP_PIXEL_REG        (0x0B)
-#define DISP_DUMMY1_REG       (0x28)
-#define DISP_DUMMY2_REG       (0x29)
-#define DISP_TIMING_REG       (0x98)
-#define DISP_DUMP_REG         (0x99)
-
-/* Sony display constants */
-#define SONY_ID1              (0x22)
-#define SONY_ID2              (0x23)
-
-/* Philips display register addresses */
-#define PH_DISP_ORIENT_REG    (0x003)
-#define PH_DISP_YPOINT_REG    (0x200)
-#define PH_DISP_XPOINT_REG    (0x201)
-#define PH_DISP_PIXEL_REG     (0x202)
-#define PH_DISP_YMIN_REG      (0x406)
-#define PH_DISP_YMAX_REG      (0x407)
-#define PH_DISP_XMIN_REG      (0x408)
-#define PH_DISP_XMAX_REG      (0x409)
-
-/* Misc constants */
-#define NO_VALID_DISPLAY_FOUND      (0)
-#define DISPLAY2_IS_NOT_CONNECTED   (0)
-
-/* register values */
-#define V_BAC_ENABLE		(BIT(0))
-#define V_BAC_DISABLE_IDLE	(BIT(1))
-#define V_BAC_DISABLE_TRIG	(BIT(2))
-#define V_DUM_RESET		(BIT(3))
-#define V_MUX_RESET		(BIT(4))
-#define BAC_ENABLED		(BIT(0))
-#define BAC_DISABLED		0
-
-/* Sony LCD commands */
-#define V_LCD_STANDBY_OFF	((BIT(25)) | (0 << 16) | DISP_0_REG)
-#define V_LCD_USE_9BIT_BUS	((BIT(25)) | (2 << 16) | DISP_1_REG)
-#define V_LCD_SYNC_RISE_L	((BIT(25)) | (0 << 16) | DISP_SYNC_RISE_L_REG)
-#define V_LCD_SYNC_RISE_H	((BIT(25)) | (0 << 16) | DISP_SYNC_RISE_H_REG)
-#define V_LCD_SYNC_FALL_L	((BIT(25)) | (160 << 16) | DISP_SYNC_FALL_L_REG)
-#define V_LCD_SYNC_FALL_H	((BIT(25)) | (0 << 16) | DISP_SYNC_FALL_H_REG)
-#define V_LCD_SYNC_ENABLE	((BIT(25)) | (128 << 16) | DISP_SYNC_EN_REG)
-#define V_LCD_DISPLAY_ON	((BIT(25)) | (64 << 16) | DISP_0_REG)
-
-enum {
-	PAD_NONE,
-	PAD_512,
-	PAD_1024
-};
-
-enum {
-	RGB888,
-	RGB666,
-	RGB565,
-	BGR565,
-	ARGB1555,
-	ABGR1555,
-	ARGB4444,
-	ABGR4444
-};
-
-struct dum_setup {
-	int sync_neg_edge;
-	int round_robin;
-	int mux_int;
-	int synced_dirty_flag_int;
-	int dirty_flag_int;
-	int error_int;
-	int pf_empty_int;
-	int sf_empty_int;
-	int bac_dis_int;
-	u32 dirty_base_adr;
-	u32 command_base_adr;
-	u32 sync_clk_div;
-	int sync_output;
-	u32 sync_restart_val;
-	u32 set_sync_high;
-	u32 set_sync_low;
-};
-
-struct dum_ch_setup {
-	int disp_no;
-	u32 xmin;
-	u32 ymin;
-	u32 xmax;
-	u32 ymax;
-	int xmirror;
-	int ymirror;
-	int rotate;
-	u32 minadr;
-	u32 maxadr;
-	u32 dirtybuffer;
-	int pad;
-	int format;
-	int hwdirty;
-	int slave_trans;
-};
-
-struct disp_window {
-	u32 xmin_l;
-	u32 xmin_h;
-	u32 ymin;
-	u32 xmax_l;
-	u32 xmax_h;
-	u32 ymax;
-};
-
-#endif				/* #ifndef __PNX008_DUM_H__ */
--- linux-2.6.orig/drivers/video/pnx4008/fbcommon.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2005 Philips Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA, or http://www.gnu.org/licenses/gpl.html
-*/
-
-#define QCIF_W  (176)
-#define QCIF_H  (144)
-
-#define CIF_W   (352)
-#define CIF_H   (288)
-
-#define LCD_X_RES	208
-#define LCD_Y_RES	320
-#define LCD_X_PAD	256
-#define LCD_BBP		4	/* Bytes Per Pixel */
-
-#define DISP_MAX_X_SIZE     (320)
-#define DISP_MAX_Y_SIZE     (208)
-
-#define RETURNVAL_BASE (0x400)
-
-enum fb_ioctl_returntype {
-	ENORESOURCESLEFT = RETURNVAL_BASE,
-	ERESOURCESNOTFREED,
-	EPROCNOTOWNER,
-	EFBNOTOWNER,
-	ECOPYFAILED,
-	EIOREMAPFAILED,
-};
--- linux-2.6.orig/drivers/video/pnx4008/pnxrgbfb.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * drivers/video/pnx4008/pnxrgbfb.c
- *
- * PNX4008's framebuffer support
- *
- * Author: Grigory Tolstolytkin <gtolstolytkin@xxxxxxxxxxxxx>
- * Based on Philips Semiconductors's code
- *
- * Copyrght (c) 2005 MontaVista Software, Inc.
- * Copyright (c) 2005 Philips Semiconductors
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include "sdum.h"
-#include "fbcommon.h"
-
-static u32 colreg[16];
-
-static struct fb_var_screeninfo rgbfb_var __initdata = {
-	.xres = LCD_X_RES,
-	.yres = LCD_Y_RES,
-	.xres_virtual = LCD_X_RES,
-	.yres_virtual = LCD_Y_RES,
-	.bits_per_pixel = 32,
-	.red.offset = 16,
-	.red.length = 8,
-	.green.offset = 8,
-	.green.length = 8,
-	.blue.offset = 0,
-	.blue.length = 8,
-	.left_margin = 0,
-	.right_margin = 0,
-	.upper_margin = 0,
-	.lower_margin = 0,
-	.vmode = FB_VMODE_NONINTERLACED,
-};
-static struct fb_fix_screeninfo rgbfb_fix __initdata = {
-	.id = "RGBFB",
-	.line_length = LCD_X_RES * LCD_BBP,
-	.type = FB_TYPE_PACKED_PIXELS,
-	.visual = FB_VISUAL_TRUECOLOR,
-	.xpanstep = 0,
-	.ypanstep = 0,
-	.ywrapstep = 0,
-	.accel = FB_ACCEL_NONE,
-};
-
-static int channel_owned;
-
-static int no_cursor(struct fb_info *info, struct fb_cursor *cursor)
-{
-	return 0;
-}
-
-static int rgbfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-			   u_int transp, struct fb_info *info)
-{
-	if (regno > 15)
-		return 1;
-
-	colreg[regno] = ((red & 0xff00) << 8) | (green & 0xff00) |
-	    ((blue & 0xff00) >> 8);
-	return 0;
-}
-
-static int rgbfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-	return pnx4008_sdum_mmap(info, vma, NULL);
-}
-
-static struct fb_ops rgbfb_ops = {
-	.fb_mmap = rgbfb_mmap,
-	.fb_setcolreg = rgbfb_setcolreg,
-	.fb_fillrect = cfb_fillrect,
-	.fb_copyarea = cfb_copyarea,
-	.fb_imageblit = cfb_imageblit,
-};
-
-static int rgbfb_remove(struct platform_device *pdev)
-{
-	struct fb_info *info = platform_get_drvdata(pdev);
-
-	if (info) {
-		unregister_framebuffer(info);
-		fb_dealloc_cmap(&info->cmap);
-		framebuffer_release(info);
-		platform_set_drvdata(pdev, NULL);
-	}
-
-	pnx4008_free_dum_channel(channel_owned, pdev->id);
-	pnx4008_set_dum_exit_notification(pdev->id);
-
-	return 0;
-}
-
-static int __devinit rgbfb_probe(struct platform_device *pdev)
-{
-	struct fb_info *info;
-	struct dumchannel_uf chan_uf;
-	int ret;
-	char *option;
-
-	info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev);
-	if (!info) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	pnx4008_get_fb_addresses(FB_TYPE_RGB, (void **)&info->screen_base,
-				 (dma_addr_t *) &rgbfb_fix.smem_start,
-				 &rgbfb_fix.smem_len);
-
-	if ((ret = pnx4008_alloc_dum_channel(pdev->id)) < 0)
-		goto err0;
-	else {
-		channel_owned = ret;
-		chan_uf.channelnr = channel_owned;
-		chan_uf.dirty = (u32 *) NULL;
-		chan_uf.source = (u32 *) rgbfb_fix.smem_start;
-		chan_uf.x_offset = 0;
-		chan_uf.y_offset = 0;
-		chan_uf.width = LCD_X_RES;
-		chan_uf.height = LCD_Y_RES;
-
-		if ((ret = pnx4008_put_dum_channel_uf(chan_uf, pdev->id))< 0)
-			goto err1;
-
-		if ((ret =
-		     pnx4008_set_dum_channel_sync(channel_owned, CONF_SYNC_ON,
-						  pdev->id)) < 0)
-			goto err1;
-
-		if ((ret =
-		     pnx4008_set_dum_channel_dirty_detect(channel_owned,
-							 CONF_DIRTYDETECTION_ON,
-							 pdev->id)) < 0)
-			goto err1;
-	}
-
-	if (!fb_get_options("pnxrgbfb", &option) && option &&
-			!strcmp(option, "nocursor"))
-		rgbfb_ops.fb_cursor = no_cursor;
-
-	info->node = -1;
-	info->flags = FBINFO_FLAG_DEFAULT;
-	info->fbops = &rgbfb_ops;
-	info->fix = rgbfb_fix;
-	info->var = rgbfb_var;
-	info->screen_size = rgbfb_fix.smem_len;
-	info->pseudo_palette = info->par;
-	info->par = NULL;
-
-	ret = fb_alloc_cmap(&info->cmap, 256, 0);
-	if (ret < 0)
-		goto err1;
-
-	ret = register_framebuffer(info);
-	if (ret < 0)
-		goto err2;
-	platform_set_drvdata(pdev, info);
-
-	return 0;
-
-err2:
-	fb_dealloc_cmap(&info->cmap);
-err1:
-	pnx4008_free_dum_channel(channel_owned, pdev->id);
-err0:
-	framebuffer_release(info);
-err:
-	return ret;
-}
-
-static struct platform_driver rgbfb_driver = {
-	.driver = {
-		.name = "pnx4008-rgbfb",
-	},
-	.probe = rgbfb_probe,
-	.remove = rgbfb_remove,
-};
-
-module_platform_driver(rgbfb_driver);
-
-MODULE_LICENSE("GPL");
--- linux-2.6.orig/drivers/video/pnx4008/sdum.c
+++ /dev/null
@@ -1,861 +0,0 @@
-/*
- * drivers/video/pnx4008/sdum.c
- *
- * Display Update Master support
- *
- * Authors: Grigory Tolstolytkin <gtolstolytkin@xxxxxxxxxxxxx>
- *          Vitaly Wool <vitalywool@xxxxxxxxx>
- * Based on Philips Semiconductors's code
- *
- * Copyrght (c) 2005-2006 MontaVista Software, Inc.
- * Copyright (c) 2005 Philips Semiconductors
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/gfp.h>
-#include <asm/uaccess.h>
-#include <asm/gpio.h>
-
-#include "sdum.h"
-#include "fbcommon.h"
-#include "dum.h"
-
-/* Framebuffers we have */
-
-static struct pnx4008_fb_addr {
-	int fb_type;
-	long addr_offset;
-	long fb_length;
-} fb_addr[] = {
-	[0] = {
-		FB_TYPE_YUV, 0, 0xB0000
-	},
-	[1] = {
-		FB_TYPE_RGB, 0xB0000, 0x50000
-	},
-};
-
-static struct dum_data {
-	u32 lcd_phys_start;
-	u32 lcd_virt_start;
-	u32 slave_phys_base;
-	u32 *slave_virt_base;
-	int fb_owning_channel[MAX_DUM_CHANNELS];
-	struct dumchannel_uf chan_uf_store[MAX_DUM_CHANNELS];
-} dum_data;
-
-/* Different local helper functions */
-
-static u32 nof_pixels_dx(struct dum_ch_setup *ch_setup)
-{
-	return (ch_setup->xmax - ch_setup->xmin + 1);
-}
-
-static u32 nof_pixels_dy(struct dum_ch_setup *ch_setup)
-{
-	return (ch_setup->ymax - ch_setup->ymin + 1);
-}
-
-static u32 nof_pixels_dxy(struct dum_ch_setup *ch_setup)
-{
-	return (nof_pixels_dx(ch_setup) * nof_pixels_dy(ch_setup));
-}
-
-static u32 nof_bytes(struct dum_ch_setup *ch_setup)
-{
-	u32 r = nof_pixels_dxy(ch_setup);
-	switch (ch_setup->format) {
-	case RGB888:
-	case RGB666:
-		r *= 4;
-		break;
-
-	default:
-		r *= 2;
-		break;
-	}
-	return r;
-}
-
-static u32 build_command(int disp_no, u32 reg, u32 val)
-{
-	return ((disp_no << 26) | BIT(25) | (val << 16) | (disp_no << 10) |
-		(reg << 0));
-}
-
-static u32 build_double_index(int disp_no, u32 val)
-{
-	return ((disp_no << 26) | (val << 16) | (disp_no << 10) | (val << 0));
-}
-
-static void build_disp_window(struct dum_ch_setup * ch_setup, struct disp_window * dw)
-{
-	dw->ymin = ch_setup->ymin;
-	dw->ymax = ch_setup->ymax;
-	dw->xmin_l = ch_setup->xmin & 0xFF;
-	dw->xmin_h = (ch_setup->xmin & BIT(8)) >> 8;
-	dw->xmax_l = ch_setup->xmax & 0xFF;
-	dw->xmax_h = (ch_setup->xmax & BIT(8)) >> 8;
-}
-
-static int put_channel(struct dumchannel chan)
-{
-	int i = chan.channelnr;
-
-	if (i < 0 || i > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else {
-		DUM_CH_MIN(i) = chan.dum_ch_min;
-		DUM_CH_MAX(i) = chan.dum_ch_max;
-		DUM_CH_CONF(i) = chan.dum_ch_conf;
-		DUM_CH_CTRL(i) = chan.dum_ch_ctrl;
-	}
-
-	return 0;
-}
-
-static void clear_channel(int channr)
-{
-	struct dumchannel chan;
-
-	chan.channelnr = channr;
-	chan.dum_ch_min = 0;
-	chan.dum_ch_max = 0;
-	chan.dum_ch_conf = 0;
-	chan.dum_ch_ctrl = 0;
-
-	put_channel(chan);
-}
-
-static int put_cmd_string(struct cmdstring cmds)
-{
-	u16 *cmd_str_virtaddr;
-	u32 *cmd_ptr0_virtaddr;
-	u32 cmd_str_physaddr;
-
-	int i = cmds.channelnr;
-
-	if (i < 0 || i > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if ((cmd_ptr0_virtaddr =
-		  (int *)ioremap_nocache(DUM_COM_BASE,
-					 sizeof(int) * MAX_DUM_CHANNELS)) ==
-		 NULL)
-		return -EIOREMAPFAILED;
-	else {
-		cmd_str_physaddr = ioread32(&cmd_ptr0_virtaddr[cmds.channelnr]);
-		if ((cmd_str_virtaddr =
-		     (u16 *) ioremap_nocache(cmd_str_physaddr,
-					     sizeof(cmds))) == NULL) {
-			iounmap(cmd_ptr0_virtaddr);
-			return -EIOREMAPFAILED;
-		} else {
-			int t;
-			for (t = 0; t < 8; t++)
-				iowrite16(*((u16 *)&cmds.prestringlen + t),
-					  cmd_str_virtaddr + t);
-
-			for (t = 0; t < cmds.prestringlen / 2; t++)
-				 iowrite16(*((u16 *)&cmds.precmd + t),
-					   cmd_str_virtaddr + t + 8);
-
-			for (t = 0; t < cmds.poststringlen / 2; t++)
-				iowrite16(*((u16 *)&cmds.postcmd + t),
-					  cmd_str_virtaddr + t + 8 +
-					  	cmds.prestringlen / 2);
-
-			iounmap(cmd_ptr0_virtaddr);
-			iounmap(cmd_str_virtaddr);
-		}
-	}
-
-	return 0;
-}
-
-static u32 dum_ch_setup(int ch_no, struct dum_ch_setup * ch_setup)
-{
-	struct cmdstring cmds_c;
-	struct cmdstring *cmds = &cmds_c;
-	struct disp_window dw;
-	int standard;
-	u32 orientation = 0;
-	struct dumchannel chan = { 0 };
-	int ret;
-
-	if ((ch_setup->xmirror) || (ch_setup->ymirror) || (ch_setup->rotate)) {
-		standard = 0;
-
-		orientation = BIT(1);	/* always set 9-bit-bus */
-		if (ch_setup->xmirror)
-			orientation |= BIT(4);
-		if (ch_setup->ymirror)
-			orientation |= BIT(3);
-		if (ch_setup->rotate)
-			orientation |= BIT(0);
-	} else
-		standard = 1;
-
-	cmds->channelnr = ch_no;
-
-	/* build command string header */
-	if (standard) {
-		cmds->prestringlen = 32;
-		cmds->poststringlen = 0;
-	} else {
-		cmds->prestringlen = 48;
-		cmds->poststringlen = 16;
-	}
-
-	cmds->format =
-	    (u16) ((ch_setup->disp_no << 4) | (BIT(3)) | (ch_setup->format));
-	cmds->reserved = 0x0;
-	cmds->startaddr_low = (ch_setup->minadr & 0xFFFF);
-	cmds->startaddr_high = (ch_setup->minadr >> 16);
-
-	if ((ch_setup->minadr == 0) && (ch_setup->maxadr == 0)
-	    && (ch_setup->xmin == 0)
-	    && (ch_setup->ymin == 0) && (ch_setup->xmax == 0)
-	    && (ch_setup->ymax == 0)) {
-		cmds->pixdatlen_low = 0;
-		cmds->pixdatlen_high = 0;
-	} else {
-		u32 nbytes = nof_bytes(ch_setup);
-		cmds->pixdatlen_low = (nbytes & 0xFFFF);
-		cmds->pixdatlen_high = (nbytes >> 16);
-	}
-
-	if (ch_setup->slave_trans)
-		cmds->pixdatlen_high |= BIT(15);
-
-	/* build pre-string */
-	build_disp_window(ch_setup, &dw);
-
-	if (standard) {
-		cmds->precmd[0] =
-		    build_command(ch_setup->disp_no, DISP_XMIN_L_REG, 0x99);
-		cmds->precmd[1] =
-		    build_command(ch_setup->disp_no, DISP_XMIN_L_REG,
-				  dw.xmin_l);
-		cmds->precmd[2] =
-		    build_command(ch_setup->disp_no, DISP_XMIN_H_REG,
-				  dw.xmin_h);
-		cmds->precmd[3] =
-		    build_command(ch_setup->disp_no, DISP_YMIN_REG, dw.ymin);
-		cmds->precmd[4] =
-		    build_command(ch_setup->disp_no, DISP_XMAX_L_REG,
-				  dw.xmax_l);
-		cmds->precmd[5] =
-		    build_command(ch_setup->disp_no, DISP_XMAX_H_REG,
-				  dw.xmax_h);
-		cmds->precmd[6] =
-		    build_command(ch_setup->disp_no, DISP_YMAX_REG, dw.ymax);
-		cmds->precmd[7] =
-		    build_double_index(ch_setup->disp_no, DISP_PIXEL_REG);
-	} else {
-		if (dw.xmin_l == ch_no)
-			cmds->precmd[0] =
-			    build_command(ch_setup->disp_no, DISP_XMIN_L_REG,
-					  0x99);
-		else
-			cmds->precmd[0] =
-			    build_command(ch_setup->disp_no, DISP_XMIN_L_REG,
-					  ch_no);
-
-		cmds->precmd[1] =
-		    build_command(ch_setup->disp_no, DISP_XMIN_L_REG,
-				  dw.xmin_l);
-		cmds->precmd[2] =
-		    build_command(ch_setup->disp_no, DISP_XMIN_H_REG,
-				  dw.xmin_h);
-		cmds->precmd[3] =
-		    build_command(ch_setup->disp_no, DISP_YMIN_REG, dw.ymin);
-		cmds->precmd[4] =
-		    build_command(ch_setup->disp_no, DISP_XMAX_L_REG,
-				  dw.xmax_l);
-		cmds->precmd[5] =
-		    build_command(ch_setup->disp_no, DISP_XMAX_H_REG,
-				  dw.xmax_h);
-		cmds->precmd[6] =
-		    build_command(ch_setup->disp_no, DISP_YMAX_REG, dw.ymax);
-		cmds->precmd[7] =
-		    build_command(ch_setup->disp_no, DISP_1_REG, orientation);
-		cmds->precmd[8] =
-		    build_double_index(ch_setup->disp_no, DISP_PIXEL_REG);
-		cmds->precmd[9] =
-		    build_double_index(ch_setup->disp_no, DISP_PIXEL_REG);
-		cmds->precmd[0xA] =
-		    build_double_index(ch_setup->disp_no, DISP_PIXEL_REG);
-		cmds->precmd[0xB] =
-		    build_double_index(ch_setup->disp_no, DISP_PIXEL_REG);
-		cmds->postcmd[0] =
-		    build_command(ch_setup->disp_no, DISP_1_REG, BIT(1));
-		cmds->postcmd[1] =
-		    build_command(ch_setup->disp_no, DISP_DUMMY1_REG, 1);
-		cmds->postcmd[2] =
-		    build_command(ch_setup->disp_no, DISP_DUMMY1_REG, 2);
-		cmds->postcmd[3] =
-		    build_command(ch_setup->disp_no, DISP_DUMMY1_REG, 3);
-	}
-
-	if ((ret = put_cmd_string(cmds_c)) != 0) {
-		return ret;
-	}
-
-	chan.channelnr = cmds->channelnr;
-	chan.dum_ch_min = ch_setup->dirtybuffer + ch_setup->minadr;
-	chan.dum_ch_max = ch_setup->dirtybuffer + ch_setup->maxadr;
-	chan.dum_ch_conf = 0x002;
-	chan.dum_ch_ctrl = 0x04;
-
-	put_channel(chan);
-
-	return 0;
-}
-
-static u32 display_open(int ch_no, int auto_update, u32 * dirty_buffer,
-			u32 * frame_buffer, u32 xpos, u32 ypos, u32 w, u32 h)
-{
-
-	struct dum_ch_setup k;
-	int ret;
-
-	/* keep width & height within display area */
-	if ((xpos + w) > DISP_MAX_X_SIZE)
-		w = DISP_MAX_X_SIZE - xpos;
-
-	if ((ypos + h) > DISP_MAX_Y_SIZE)
-		h = DISP_MAX_Y_SIZE - ypos;
-
-	/* assume 1 display only */
-	k.disp_no = 0;
-	k.xmin = xpos;
-	k.ymin = ypos;
-	k.xmax = xpos + (w - 1);
-	k.ymax = ypos + (h - 1);
-
-	/* adjust min and max values if necessary */
-	if (k.xmin > DISP_MAX_X_SIZE - 1)
-		k.xmin = DISP_MAX_X_SIZE - 1;
-	if (k.ymin > DISP_MAX_Y_SIZE - 1)
-		k.ymin = DISP_MAX_Y_SIZE - 1;
-
-	if (k.xmax > DISP_MAX_X_SIZE - 1)
-		k.xmax = DISP_MAX_X_SIZE - 1;
-	if (k.ymax > DISP_MAX_Y_SIZE - 1)
-		k.ymax = DISP_MAX_Y_SIZE - 1;
-
-	k.xmirror = 0;
-	k.ymirror = 0;
-	k.rotate = 0;
-	k.minadr = (u32) frame_buffer;
-	k.maxadr = (u32) frame_buffer + (((w - 1) << 10) | ((h << 2) - 2));
-	k.pad = PAD_1024;
-	k.dirtybuffer = (u32) dirty_buffer;
-	k.format = RGB888;
-	k.hwdirty = 0;
-	k.slave_trans = 0;
-
-	ret = dum_ch_setup(ch_no, &k);
-
-	return ret;
-}
-
-static void lcd_reset(void)
-{
-	u32 *dum_pio_base = (u32 *)IO_ADDRESS(PNX4008_PIO_BASE);
-
-	udelay(1);
-	iowrite32(BIT(19), &dum_pio_base[2]);
-	udelay(1);
-	iowrite32(BIT(19), &dum_pio_base[1]);
-	udelay(1);
-}
-
-static int dum_init(struct platform_device *pdev)
-{
-	struct clk *clk;
-
-	/* enable DUM clock */
-	clk = clk_get(&pdev->dev, "dum_ck");
-	if (IS_ERR(clk)) {
-		printk(KERN_ERR "pnx4008_dum: Unable to access DUM clock\n");
-		return PTR_ERR(clk);
-	}
-
-	clk_set_rate(clk, 1);
-	clk_put(clk);
-
-	DUM_CTRL = V_DUM_RESET;
-
-	/* set priority to "round-robin". All other params to "false" */
-	DUM_CONF = BIT(9);
-
-	/* Display 1 */
-	DUM_WTCFG1 = PNX4008_DUM_WT_CFG;
-	DUM_RTCFG1 = PNX4008_DUM_RT_CFG;
-	DUM_TCFG = PNX4008_DUM_T_CFG;
-
-	return 0;
-}
-
-static void dum_chan_init(void)
-{
-	int i = 0, ch = 0;
-	u32 *cmdptrs;
-	u32 *cmdstrings;
-
-	DUM_COM_BASE =
-		CMDSTRING_BASEADDR + BYTES_PER_CMDSTRING * NR_OF_CMDSTRINGS;
-
-	if ((cmdptrs =
-	     (u32 *) ioremap_nocache(DUM_COM_BASE,
-				     sizeof(u32) * NR_OF_CMDSTRINGS)) == NULL)
-		return;
-
-	for (ch = 0; ch < NR_OF_CMDSTRINGS; ch++)
-		iowrite32(CMDSTRING_BASEADDR + BYTES_PER_CMDSTRING * ch,
-			  cmdptrs + ch);
-
-	for (ch = 0; ch < MAX_DUM_CHANNELS; ch++)
-		clear_channel(ch);
-
-	/* Clear the cmdstrings */
-	cmdstrings =
-	    (u32 *)ioremap_nocache(*cmdptrs,
-				   BYTES_PER_CMDSTRING * NR_OF_CMDSTRINGS);
-
-	if (!cmdstrings)
-		goto out;
-
-	for (i = 0; i < NR_OF_CMDSTRINGS * BYTES_PER_CMDSTRING / sizeof(u32);
-	     i++)
-		iowrite32(0, cmdstrings + i);
-
-	iounmap((u32 *)cmdstrings);
-
-out:
-	iounmap((u32 *)cmdptrs);
-}
-
-static void lcd_init(void)
-{
-	lcd_reset();
-
-	DUM_OUTP_FORMAT1 = 0; /* RGB666 */
-
-	udelay(1);
-	iowrite32(V_LCD_STANDBY_OFF, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_USE_9BIT_BUS, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_SYNC_RISE_L, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_SYNC_RISE_H, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_SYNC_FALL_L, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_SYNC_FALL_H, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_SYNC_ENABLE, dum_data.slave_virt_base);
-	udelay(1);
-	iowrite32(V_LCD_DISPLAY_ON, dum_data.slave_virt_base);
-	udelay(1);
-}
-
-/* Interface exported to framebuffer drivers */
-
-int pnx4008_get_fb_addresses(int fb_type, void **virt_addr,
-			     dma_addr_t *phys_addr, int *fb_length)
-{
-	int i;
-	int ret = -1;
-	for (i = 0; i < ARRAY_SIZE(fb_addr); i++)
-		if (fb_addr[i].fb_type == fb_type) {
-			*virt_addr = (void *)(dum_data.lcd_virt_start +
-					fb_addr[i].addr_offset);
-			*phys_addr =
-			    dum_data.lcd_phys_start + fb_addr[i].addr_offset;
-			*fb_length = fb_addr[i].fb_length;
-			ret = 0;
-			break;
-		}
-
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_get_fb_addresses);
-
-int pnx4008_alloc_dum_channel(int dev_id)
-{
-	int i = 0;
-
-	while ((i < MAX_DUM_CHANNELS) && (dum_data.fb_owning_channel[i] != -1))
-		i++;
-
-	if (i == MAX_DUM_CHANNELS)
-		return -ENORESOURCESLEFT;
-	else {
-		dum_data.fb_owning_channel[i] = dev_id;
-		return i;
-	}
-}
-
-EXPORT_SYMBOL(pnx4008_alloc_dum_channel);
-
-int pnx4008_free_dum_channel(int channr, int dev_id)
-{
-	if (channr < 0 || channr > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if (dum_data.fb_owning_channel[channr] != dev_id)
-		return -EFBNOTOWNER;
-	else {
-		clear_channel(channr);
-		dum_data.fb_owning_channel[channr] = -1;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_free_dum_channel);
-
-int pnx4008_put_dum_channel_uf(struct dumchannel_uf chan_uf, int dev_id)
-{
-	int i = chan_uf.channelnr;
-	int ret;
-
-	if (i < 0 || i > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if (dum_data.fb_owning_channel[i] != dev_id)
-		return -EFBNOTOWNER;
-	else if ((ret =
-		  display_open(chan_uf.channelnr, 0, chan_uf.dirty,
-			       chan_uf.source, chan_uf.y_offset,
-			       chan_uf.x_offset, chan_uf.height,
-			       chan_uf.width)) != 0)
-		return ret;
-	else {
-		dum_data.chan_uf_store[i].dirty = chan_uf.dirty;
-		dum_data.chan_uf_store[i].source = chan_uf.source;
-		dum_data.chan_uf_store[i].x_offset = chan_uf.x_offset;
-		dum_data.chan_uf_store[i].y_offset = chan_uf.y_offset;
-		dum_data.chan_uf_store[i].width = chan_uf.width;
-		dum_data.chan_uf_store[i].height = chan_uf.height;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_put_dum_channel_uf);
-
-int pnx4008_set_dum_channel_sync(int channr, int val, int dev_id)
-{
-	if (channr < 0 || channr > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if (dum_data.fb_owning_channel[channr] != dev_id)
-		return -EFBNOTOWNER;
-	else {
-		if (val == CONF_SYNC_ON) {
-			DUM_CH_CONF(channr) |= CONF_SYNCENABLE;
-			DUM_CH_CONF(channr) |= DUM_CHANNEL_CFG_SYNC_MASK |
-				DUM_CHANNEL_CFG_SYNC_MASK_SET;
-		} else if (val == CONF_SYNC_OFF)
-			DUM_CH_CONF(channr) &= ~CONF_SYNCENABLE;
-		else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_set_dum_channel_sync);
-
-int pnx4008_set_dum_channel_dirty_detect(int channr, int val, int dev_id)
-{
-	if (channr < 0 || channr > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if (dum_data.fb_owning_channel[channr] != dev_id)
-		return -EFBNOTOWNER;
-	else {
-		if (val == CONF_DIRTYDETECTION_ON)
-			DUM_CH_CONF(channr) |= CONF_DIRTYENABLE;
-		else if (val == CONF_DIRTYDETECTION_OFF)
-			DUM_CH_CONF(channr) &= ~CONF_DIRTYENABLE;
-		else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_set_dum_channel_dirty_detect);
-
-#if 0 /* Functions not used currently, but likely to be used in future */
-
-static int get_channel(struct dumchannel *p_chan)
-{
-	int i = p_chan->channelnr;
-
-	if (i < 0 || i > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else {
-		p_chan->dum_ch_min = DUM_CH_MIN(i);
-		p_chan->dum_ch_max = DUM_CH_MAX(i);
-		p_chan->dum_ch_conf = DUM_CH_CONF(i);
-		p_chan->dum_ch_stat = DUM_CH_STAT(i);
-		p_chan->dum_ch_ctrl = 0;	/* WriteOnly control register */
-	}
-
-	return 0;
-}
-
-int pnx4008_get_dum_channel_uf(struct dumchannel_uf *p_chan_uf, int dev_id)
-{
-	int i = p_chan_uf->channelnr;
-
-	if (i < 0 || i > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if (dum_data.fb_owning_channel[i] != dev_id)
-		return -EFBNOTOWNER;
-	else {
-		p_chan_uf->dirty = dum_data.chan_uf_store[i].dirty;
-		p_chan_uf->source = dum_data.chan_uf_store[i].source;
-		p_chan_uf->x_offset = dum_data.chan_uf_store[i].x_offset;
-		p_chan_uf->y_offset = dum_data.chan_uf_store[i].y_offset;
-		p_chan_uf->width = dum_data.chan_uf_store[i].width;
-		p_chan_uf->height = dum_data.chan_uf_store[i].height;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_get_dum_channel_uf);
-
-int pnx4008_get_dum_channel_config(int channr, int dev_id)
-{
-	int ret;
-	struct dumchannel chan;
-
-	if (channr < 0 || channr > MAX_DUM_CHANNELS)
-		return -EINVAL;
-	else if (dum_data.fb_owning_channel[channr] != dev_id)
-		return -EFBNOTOWNER;
-	else {
-		chan.channelnr = channr;
-		if ((ret = get_channel(&chan)) != 0)
-			return ret;
-	}
-
-	return (chan.dum_ch_conf & DUM_CHANNEL_CFG_MASK);
-}
-
-EXPORT_SYMBOL(pnx4008_get_dum_channel_config);
-
-int pnx4008_force_update_dum_channel(int channr, int dev_id)
-{
-	if (channr < 0 || channr > MAX_DUM_CHANNELS)
-		return -EINVAL;
-
-	else if (dum_data.fb_owning_channel[channr] != dev_id)
-		return -EFBNOTOWNER;
-	else
-		DUM_CH_CTRL(channr) = CTRL_SETDIRTY;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_force_update_dum_channel);
-
-#endif
-
-int pnx4008_sdum_mmap(struct fb_info *info, struct vm_area_struct *vma,
-		      struct device *dev)
-{
-	unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
-
-	if (off < info->fix.smem_len) {
-		vma->vm_pgoff += 1;
-		return dma_mmap_writecombine(dev, vma,
-				(void *)dum_data.lcd_virt_start,
-				dum_data.lcd_phys_start,
-				FB_DMA_SIZE);
-	}
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(pnx4008_sdum_mmap);
-
-int pnx4008_set_dum_exit_notification(int dev_id)
-{
-	int i;
-
-	for (i = 0; i < MAX_DUM_CHANNELS; i++)
-		if (dum_data.fb_owning_channel[i] == dev_id)
-			return -ERESOURCESNOTFREED;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pnx4008_set_dum_exit_notification);
-
-/* Platform device driver for DUM */
-
-static int sdum_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	int retval = 0;
-	struct clk *clk;
-
-	clk = clk_get(0, "dum_ck");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 0);
-		clk_put(clk);
-	} else
-		retval = PTR_ERR(clk);
-
-	/* disable BAC */
-	DUM_CTRL = V_BAC_DISABLE_IDLE;
-
-	/* LCD standby & turn off display */
-	lcd_reset();
-
-	return retval;
-}
-
-static int sdum_resume(struct platform_device *pdev)
-{
-	int retval = 0;
-	struct clk *clk;
-
-	clk = clk_get(0, "dum_ck");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 1);
-		clk_put(clk);
-	} else
-		retval = PTR_ERR(clk);
-
-	/* wait for BAC disable */
-	DUM_CTRL = V_BAC_DISABLE_TRIG;
-
-	while (DUM_CTRL & BAC_ENABLED)
-		udelay(10);
-
-	/* re-init LCD */
-	lcd_init();
-
-	/* enable BAC and reset MUX */
-	DUM_CTRL = V_BAC_ENABLE;
-	udelay(1);
-	DUM_CTRL = V_MUX_RESET;
-	return 0;
-}
-
-static int __devinit sdum_probe(struct platform_device *pdev)
-{
-	int ret = 0, i = 0;
-
-	/* map frame buffer */
-	dum_data.lcd_virt_start = (u32) dma_alloc_writecombine(&pdev->dev,
-						       FB_DMA_SIZE,
-						       &dum_data.lcd_phys_start,
-						       GFP_KERNEL);
-
-	if (!dum_data.lcd_virt_start) {
-		ret = -ENOMEM;
-		goto out_3;
-	}
-
-	/* map slave registers */
-	dum_data.slave_phys_base = PNX4008_DUM_SLAVE_BASE;
-	dum_data.slave_virt_base =
-	    (u32 *) ioremap_nocache(dum_data.slave_phys_base, sizeof(u32));
-
-	if (dum_data.slave_virt_base == NULL) {
-		ret = -ENOMEM;
-		goto out_2;
-	}
-
-	/* initialize DUM and LCD display */
-	ret = dum_init(pdev);
-	if (ret)
-		goto out_1;
-
-	dum_chan_init();
-	lcd_init();
-
-	DUM_CTRL = V_BAC_ENABLE;
-	udelay(1);
-	DUM_CTRL = V_MUX_RESET;
-
-	/* set decode address and sync clock divider */
-	DUM_DECODE = dum_data.lcd_phys_start & DUM_DECODE_MASK;
-	DUM_CLK_DIV = PNX4008_DUM_CLK_DIV;
-
-	for (i = 0; i < MAX_DUM_CHANNELS; i++)
-		dum_data.fb_owning_channel[i] = -1;
-
-	/*setup wakeup interrupt */
-	start_int_set_rising_edge(SE_DISP_SYNC_INT);
-	start_int_ack(SE_DISP_SYNC_INT);
-	start_int_umask(SE_DISP_SYNC_INT);
-
-	return 0;
-
-out_1:
-	iounmap((void *)dum_data.slave_virt_base);
-out_2:
-	dma_free_writecombine(&pdev->dev, FB_DMA_SIZE,
-			(void *)dum_data.lcd_virt_start,
-			dum_data.lcd_phys_start);
-out_3:
-	return ret;
-}
-
-static int sdum_remove(struct platform_device *pdev)
-{
-	struct clk *clk;
-
-	start_int_mask(SE_DISP_SYNC_INT);
-
-	clk = clk_get(0, "dum_ck");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 0);
-		clk_put(clk);
-	}
-
-	iounmap((void *)dum_data.slave_virt_base);
-
-	dma_free_writecombine(&pdev->dev, FB_DMA_SIZE,
-			(void *)dum_data.lcd_virt_start,
-			dum_data.lcd_phys_start);
-
-	return 0;
-}
-
-static struct platform_driver sdum_driver = {
-	.driver = {
-		.name = "pnx4008-sdum",
-	},
-	.probe = sdum_probe,
-	.remove = sdum_remove,
-	.suspend = sdum_suspend,
-	.resume = sdum_resume,
-};
-
-module_platform_driver(sdum_driver);
-
-MODULE_LICENSE("GPL");
--- linux-2.6.orig/drivers/video/pnx4008/sdum.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (C) 2005 Philips Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA, or http://www.gnu.org/licenses/gpl.html
-*/
-
-#define MAX_DUM_CHANNELS	64
-
-#define RGB_MEM_WINDOW(x) (0x10000000 + (x)*0x00100000)
-
-#define QCIF_OFFSET(x) (((x) == 0) ? 0x00000: ((x) == 1) ? 0x30000: -1)
-#define CIF_OFFSET(x)  (((x) == 0) ? 0x00000: ((x) == 1) ? 0x60000: -1)
-
-#define CTRL_SETDIRTY	 	(0x00000001)
-#define CONF_DIRTYENABLE	(0x00000020)
-#define CONF_SYNCENABLE		(0x00000004)
-
-#define DIRTY_ENABLED(conf)	((conf) & 0x0020)
-#define SYNC_ENABLED(conf) 	((conf) & 0x0004)
-
-/* Display 1 & 2 Write Timing Configuration */
-#define PNX4008_DUM_WT_CFG		0x00372000
-
-/* Display 1 & 2 Read Timing Configuration */
-#define PNX4008_DUM_RT_CFG		0x00003A47
-
-/* DUM Transit State Timing Configuration */
-#define PNX4008_DUM_T_CFG		0x1D	/* 29 HCLK cycles */
-
-/* DUM Sync count clock divider */
-#define PNX4008_DUM_CLK_DIV		0x02DD
-
-/* Memory size for framebuffer, allocated through dma_alloc_writecombine().
- * Must be PAGE aligned
- */
-#define FB_DMA_SIZE (PAGE_ALIGN(SZ_1M + PAGE_SIZE))
-
-#define OFFSET_RGBBUFFER (0xB0000)
-#define OFFSET_YUVBUFFER (0x00000)
-
-#define YUVBUFFER (lcd_video_start + OFFSET_YUVBUFFER)
-#define RGBBUFFER (lcd_video_start + OFFSET_RGBBUFFER)
-
-#define CMDSTRING_BASEADDR	(0x00C000)	/* iram */
-#define BYTES_PER_CMDSTRING	(0x80)
-#define NR_OF_CMDSTRINGS	(64)
-
-#define MAX_NR_PRESTRINGS (0x40)
-#define MAX_NR_POSTSTRINGS (0x40)
-
-/* various mask definitions */
-#define DUM_CLK_ENABLE 0x01
-#define DUM_CLK_DISABLE 0
-#define DUM_DECODE_MASK 0x1FFFFFFF
-#define DUM_CHANNEL_CFG_MASK 0x01FF
-#define DUM_CHANNEL_CFG_SYNC_MASK 0xFFFE00FF
-#define DUM_CHANNEL_CFG_SYNC_MASK_SET 0x0CA00
-
-#define SDUM_RETURNVAL_BASE (0x500)
-
-#define CONF_SYNC_OFF		(0x602)
-#define CONF_SYNC_ON		(0x603)
-
-#define CONF_DIRTYDETECTION_OFF	(0x600)
-#define CONF_DIRTYDETECTION_ON	(0x601)
-
-struct dumchannel_uf {
-	int channelnr;
-	u32 *dirty;
-	u32 *source;
-	u32 x_offset;
-	u32 y_offset;
-	u32 width;
-	u32 height;
-};
-
-enum {
-	FB_TYPE_YUV,
-	FB_TYPE_RGB
-};
-
-struct cmdstring {
-	int channelnr;
-	uint16_t prestringlen;
-	uint16_t poststringlen;
-	uint16_t format;
-	uint16_t reserved;
-	uint16_t startaddr_low;
-	uint16_t startaddr_high;
-	uint16_t pixdatlen_low;
-	uint16_t pixdatlen_high;
-	u32 precmd[MAX_NR_PRESTRINGS];
-	u32 postcmd[MAX_NR_POSTSTRINGS];
-
-};
-
-struct dumchannel {
-	int channelnr;
-	int dum_ch_min;
-	int dum_ch_max;
-	int dum_ch_conf;
-	int dum_ch_stat;
-	int dum_ch_ctrl;
-};
-
-int pnx4008_alloc_dum_channel(int dev_id);
-int pnx4008_free_dum_channel(int channr, int dev_id);
-
-int pnx4008_get_dum_channel_uf(struct dumchannel_uf *pChan_uf, int dev_id);
-int pnx4008_put_dum_channel_uf(struct dumchannel_uf chan_uf, int dev_id);
-
-int pnx4008_set_dum_channel_sync(int channr, int val, int dev_id);
-int pnx4008_set_dum_channel_dirty_detect(int channr, int val, int dev_id);
-
-int pnx4008_force_dum_update_channel(int channr, int dev_id);
-
-int pnx4008_get_dum_channel_config(int channr, int dev_id);
-
-int pnx4008_sdum_mmap(struct fb_info *info, struct vm_area_struct *vma, struct device *dev);
-int pnx4008_set_dum_exit_notification(int dev_id);
-
-int pnx4008_get_fb_addresses(int fb_type, void **virt_addr,
-			     dma_addr_t * phys_addr, int *fb_length);
--- linux-2.6.orig/drivers/watchdog/Kconfig
+++ linux-2.6/drivers/watchdog/Kconfig
@@ -237,12 +237,12 @@ config OMAP_WATCHDOG
 	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 
 config PNX4008_WATCHDOG
-	tristate "PNX4008 and LPC32XX Watchdog"
-	depends on ARCH_PNX4008 || ARCH_LPC32XX
+	tristate "LPC32XX Watchdog"
+	depends on ARCH_LPC32XX
 	select WATCHDOG_CORE
 	help
 	  Say Y here if to include support for the watchdog timer
-	  in the PNX4008 or LPC32XX processor.
+	  in the LPC32XX processor.
 	  This driver can be built as a module by choosing M. The module
 	  will be called pnx4008_wdt.
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/