[PATCH v3 1/2] writeback: add dirty_background_centisecs per bdi variable

From: Namjae Jeon
Date: Sun Sep 16 2012 - 08:25:48 EST


From: Namjae Jeon <namjae.jeon@xxxxxxxxxxx>

This patch is based on suggestion by Wu Fengguang:
https://lkml.org/lkml/2011/8/19/19

kernel has mechanism to do writeback as per dirty_ratio and dirty_background
ratio. It also maintains per task dirty rate limit to keep balance of
dirty pages at any given instance by doing bdi bandwidth estimation.

Kernel also has max_ratio/min_ratio tunables to specify percentage of
writecache to control per bdi dirty limits and task throttling.

However, there might be a usecase where user wants a per bdi writeback tuning
parameter to flush dirty data once per bdi dirty data reach a threshold
especially at NFS server.

dirty_background_centisecs provides an interface where user can tune
background writeback start threshold using
/sys/block/sda/bdi/dirty_background_centisecs

dirty_background_centisecs is used alongwith average bdi write bandwidth
estimation to start background writeback.

One of the use case to demonstrate the patch functionality can be
on NFS setup:-
We have a NFS setup with ethernet line of 100Mbps, while the USB
disk is attached to server, which has a local speed of 25MBps. Server
and client both are arm target boards.

Now if we perform a write operation over NFS (client to server), as
per the network speed, data can travel at max speed of 100Mbps. But
if we check the default write speed of USB hdd over NFS it comes
around to 8MB/sec, far below the speed of network.

Reason being is as per the NFS logic, during write operation, initially
pages are dirtied on NFS client side, then after reaching the dirty
threshold/writeback limit (or in case of sync) data is actually sent
to NFS server (so now again pages are dirtied on server side). This
will be done in COMMIT call from client to server i.e if 100MB of data
is dirtied and sent then it will take minimum 100MB/10Mbps ~ 8-9 seconds.

After the data is received, now it will take approx 100/25 ~4 Seconds to
write the data to USB Hdd on server side. Hence making the overall time
to write this much of data ~12 seconds, which in practically comes out to
be near 7 to 8MB/second. After this a COMMIT response will be sent to NFS
client.

However we may improve this write performace by making the use of NFS
server idle time i.e while data is being received from the client,
simultaneously initiate the writeback thread on server side. So instead
of waiting for the complete data to come and then start the writeback,
we can work in parallel while the network is still busy in receiving the
data. Hence in this way overall performace will be improved.

If we tune dirty_background_centisecs, we can see there
is increase in the performace and it comes out to be ~ 11MB/seconds.
Results are:-

Write test(create a 1 GB file) result at 'NFS client' after changing
/sys/block/sda/bdi/dirty_background_centisecs
on *** NFS Server only - not on NFS Client ****

---------------------------------------------------------------------
|WRITE Test with various 'dirty_background_centisecs' at NFS Server |
---------------------------------------------------------------------
| | default = 0 | 300 centisec| 200 centisec| 100 centisec |
---------------------------------------------------------------------
|RecSize | WriteSpeed | WriteSpeed | WriteSpeed | WriteSpeed |
---------------------------------------------------------------------
|10485760 | 8.44MB/sec | 8.60MB/sec | 9.30MB/sec | 10.27MB/sec |
| 1048576 | 8.48MB/sec | 8.87MB/sec | 9.31MB/sec | 10.34MB/sec |
| 524288 | 8.37MB/sec | 8.42MB/sec | 9.84MB/sec | 10.47MB/sec |
| 262144 | 8.16MB/sec | 8.51MB/sec | 9.52MB/sec | 10.62MB/sec |
| 131072 | 8.48MB/sec | 8.81MB/sec | 9.42MB/sec | 10.55MB/sec |
| 65536 | 8.38MB/sec | 9.09MB/sec | 9.76MB/sec | 10.53MB/sec |
| 32768 | 8.65MB/sec | 9.00MB/sec | 9.57MB/sec | 10.54MB/sec |
| 16384 | 8.27MB/sec | 8.80MB/sec | 9.39MB/sec | 10.43MB/sec |
| 8192 | 8.52MB/sec | 8.70MB/sec | 9.40MB/sec | 10.50MB/sec |
| 4096 | 8.20MB/sec | 8.63MB/sec | 9.80MB/sec | 10.35MB/sec |
---------------------------------------------------------------------

we can see, average write speed is increased to ~10-11MB/sec.
============================================================

This patch provides the changes per block devices. So that we may modify the
dirty_background_centisecs as per the device and overall system is not impacted
by the changes and we get improved perforamace in certain use cases.

NOTE: dirty_background_centisecs is used alongwith average bdi write bandwidth
estimation to start background writeback. But, bdi write bandwidth estimation
is an _estimation_ and may become wildly wrong. dirty_background_centisecs
tuning may not always work to the user expectations. dirty_background_centisecs
will require careful tuning by users on NFS Server.
As a good use case, dirty_background_time should be set around 100 (1 sec).
It should not be set to very small value, otherwise it will start
flushing for small I/O size dirty data.

Changes since v1:
* make default value of 'dirty_background_centisecs = 0' sothat there is no change
in default writeback behaviour.
* Add description of dirty_background_centisecs in documentation.

Original-patch-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>
Signed-off-by: Namjae Jeon <namjae.jeon@xxxxxxxxxxx>
Signed-off-by: Vivek Trivedi <t.vivek@xxxxxxxxxxx>
---
fs/fs-writeback.c | 21 +++++++++++++++++++--
include/linux/backing-dev.h | 1 +
include/linux/writeback.h | 1 +
mm/backing-dev.c | 21 +++++++++++++++++++++
mm/page-writeback.c | 3 ++-
5 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index fd255c0..c427130 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -769,6 +769,22 @@ static bool over_bground_thresh(struct backing_dev_info *bdi)
return false;
}

+bool over_dirty_bground_time(struct backing_dev_info *bdi)
+{
+ unsigned long background_thresh;
+
+ if (!bdi->dirty_background_centisecs)
+ return false;
+
+ background_thresh = bdi->avg_write_bandwidth *
+ bdi->dirty_background_centisecs / 100;
+
+ if (bdi_stat(bdi, BDI_RECLAIMABLE) > background_thresh)
+ return true;
+
+ return false;
+}
+
/*
* Called under wb->list_lock. If there are multiple wb per bdi,
* only the flusher working on the first wb should do it.
@@ -828,7 +844,8 @@ static long wb_writeback(struct bdi_writeback *wb,
* For background writeout, stop when we are below the
* background dirty threshold
*/
- if (work->for_background && !over_bground_thresh(wb->bdi))
+ if (work->for_background && !over_bground_thresh(wb->bdi) &&
+ !over_dirty_bground_time(wb->bdi))
break;

/*
@@ -920,7 +937,7 @@ static unsigned long get_nr_dirty_pages(void)

static long wb_check_background_flush(struct bdi_writeback *wb)
{
- if (over_bground_thresh(wb->bdi)) {
+ if (over_bground_thresh(wb->bdi) || over_dirty_bground_time(wb->bdi)) {

struct wb_writeback_work work = {
.nr_pages = LONG_MAX,
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 2a9a9ab..43d2e15 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -95,6 +95,7 @@ struct backing_dev_info {

unsigned int min_ratio;
unsigned int max_ratio, max_prop_frac;
+ unsigned int dirty_background_centisecs;

struct bdi_writeback wb; /* default writeback info for this bdi */
spinlock_t wb_lock; /* protects work_list */
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 50c3e8f..6dc2abe 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -96,6 +96,7 @@ long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
void wakeup_flusher_threads(long nr_pages, enum wb_reason reason);
void inode_wait_for_writeback(struct inode *inode);
+bool over_dirty_bground_time(struct backing_dev_info *bdi);

/* writeback.h requires fs.h; it, too, is not included from here. */
static inline void wait_on_inode(struct inode *inode)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index d3ca2b3..b1b2fd2 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -221,12 +221,32 @@ static ssize_t max_ratio_store(struct device *dev,
}
BDI_SHOW(max_ratio, bdi->max_ratio)

+static ssize_t dirty_background_centisecs_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct backing_dev_info *bdi = dev_get_drvdata(dev);
+ unsigned int centisecs;
+ ssize_t ret;
+
+ ret = kstrtouint(buf, 10, &centisecs);
+ if (ret < 0)
+ return ret;
+
+ bdi->dirty_background_centisecs = centisecs;
+ if (over_dirty_bground_time(bdi))
+ bdi_start_background_writeback(bdi);
+
+ return count;
+}
+BDI_SHOW(dirty_background_centisecs, bdi->dirty_background_centisecs)
+
#define __ATTR_RW(attr) __ATTR(attr, 0644, attr##_show, attr##_store)

static struct device_attribute bdi_dev_attrs[] = {
__ATTR_RW(read_ahead_kb),
__ATTR_RW(min_ratio),
__ATTR_RW(max_ratio),
+ __ATTR_RW(dirty_background_centisecs),
__ATTR_NULL,
};

@@ -628,6 +648,7 @@ int bdi_init(struct backing_dev_info *bdi)
bdi->min_ratio = 0;
bdi->max_ratio = 100;
bdi->max_prop_frac = FPROP_FRAC_BASE;
+ bdi->dirty_background_centisecs = 0;
spin_lock_init(&bdi->wb_lock);
INIT_LIST_HEAD(&bdi->bdi_list);
INIT_LIST_HEAD(&bdi->work_list);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 5ad5ce2..8c1530d 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1403,7 +1403,8 @@ pause:
if (laptop_mode)
return;

- if (nr_reclaimable > background_thresh)
+ if (nr_reclaimable > background_thresh ||
+ over_dirty_bground_time(bdi))
bdi_start_background_writeback(bdi);
}

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/