Re: radeon: Regression between v3.6-rc4 and v3.6-rc6: unable to allocate a PPLL

[Andres Freund]

On Monday, September 17, 2012 03:16:56 PM Deucher, Alexander wrote:
> > -----Original Message-----
> > From: Andres Freund [mailto:andres@xxxxxxxxxxx]
> > Sent: Monday, September 17, 2012 7:29 AM
> > To: LKML; Deucher, Alexander; David Airlie;
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx Subject: radeon: Regression between
> > v3.6-rc4 and v3.6-rc6: unable to allocate a PPLL
> > 
> > Hi,
> > 
> > While debugging another issue I upgraded from v3.6-rc4 to latest git
> > (which exactly is v3.6-rc6). After X started up one of my three monitors
> > blacked out. A look into the kernel log revealed:
> > [drm:radeon_atom_pick_pll] *ERROR* unable to allocate a PPLL
> 
> What 3 monitors are you using (DVI, HDMI, DP, VGA)? Note that there are
> only 2 PLLs for non-DP monitors, so if you are trying to use more than 2
> non-DP monitors, it's not supported right now and if it worked before, it
> was random luck.  If you want to use 3+ monitors, only 2 can be non-DP,
> the rest need to be DP.  If you use a DP to DVI/HDMI adapter, it must be
> active (looks like DP to the GPU), passive adapters just pass through
> native DVI/HDMI.  That said, I've got a set of patches for 3.7 to allow
> PLL sharing properly for non-DP displays, but it's too invasive for
> -fixes.
2DVI, 1DP via an supposedly active converter. I can try a native DP cable, its 
just too short, so I will have to move the monitor to the ground ;)

Can I check its really an active connector?

The patchset you referenced is in alexdeucher/drm-next-3.7-wip if I saw that 
correctly? Will test it with a passive connector I have lying arround.

The only somewhat relevant thing in the log seems to be

[    2.011401] [drm] ring test on 0 succeeded in 3 usecs
[    2.011897] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.012596] [drm] Radeon Display Connectors
[    2.012784] [drm] Connector 0:
[    2.012972] [drm]   DP-1
[    2.013157] [drm]   HPD4
[    2.013340] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 
0x643c
[    2.013608] [drm]   Encoders:
[    2.013787] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.013978] [drm] Connector 1:
[    2.014163] [drm]   HDMI-A-1
[    2.014346] [drm]   HPD3
[    2.014548] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 
0x646c
[    2.014816] [drm]   Encoders:
[    2.015005] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.015194] [drm] Connector 2:
[    2.015376] [drm]   DVI-D-1
[    2.015561] [drm]   HPD1
[    2.015745] [drm]   DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 
0x648c
[    2.016015] [drm]   Encoders:
[    2.016203] [drm]     DFP3: INTERNAL_UNIPHY1
[    2.016389] [drm] Connector 3:
[    2.016574] [drm]   DVI-I-1
[    2.016759] [drm]   HPD6
[    2.016942] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 
0x647c
[    2.017214] [drm]   Encoders:
[    2.017401] [drm]     DFP4: INTERNAL_UNIPHY

xrand doesn't seem to have anything relevant:
$ xrandr --verbose|grep -E 'Screen|connected|CRTC'
Screen 0: minimum 320 x 200, current 4960 x 1920, maximum 16384 x 16384
DVI-1 connected 2560x1600+1200+0 (0x59) normal (normal left inverted right x 
axis y axis) 641mm x 401mm
	CRTC:       0
	CRTCs:      1 2 0 3 4 5
DisplayPort-0 connected 1200x1920+0+0 (0x60) left (normal left inverted right x 
axis y axis) 518mm x 324mm
	CRTC:       1
	CRTCs:      1 2 0 3 4 5
HDMI-0 disconnected (normal left inverted right x axis y axis)
	CRTCs:      1 2 0 3 4 5
DVI-0 connected 1200x1920+3760+0 (0x60) left (normal left inverted right x axis 
y axis) 518mm x 324mm
	CRTC:       2
	CRTCs:      1 2 0 3 4 5

Greetings,

Andres
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/