Re: [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically

From: Stephen Warren
Date: Thu Sep 27 2012 - 01:13:07 EST


On 09/26/2012 11:18 AM, Linus Walleij wrote:
> From: Linus Walleij <linus.walleij@xxxxxxxxxx>
>
> This allocates the IRQ descriptors for the Nomadik pin controller
> dynamically so that we don't have to rely on some other mechanism
> doing it, and moving a step closer to a linear IRQ domain.
>
> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> drivers/pinctrl/pinctrl-nomadik.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
> index 3dde653..29921d1 100644
> --- a/drivers/pinctrl/pinctrl-nomadik.c
> +++ b/drivers/pinctrl/pinctrl-nomadik.c
> @@ -1185,6 +1185,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
> struct clk *clk;
> int secondary_irq;
> void __iomem *base;
> + int irq_start;
> + int irq_base;
> int irq;
> int ret;
>
> @@ -1288,9 +1290,22 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
>
> platform_set_drvdata(dev, nmk_chip);
>
> + /*
> + * Allocate descriptors and IRQ domain using the legacy model, this
> + * should eventually be replaced with a linear IRQ domain as we get
> + * independent from the irq numbers with the switch to device tree.
> + */
> + irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);

Presumably that's a 1:1 mapping...

> + irq_base = irq_alloc_descs(irq_start, 0, NMK_GPIO_PER_CHIP,
> + numa_node_id());
> + if (IS_ERR_VALUE(irq_base)) {
> + WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
> + irq_start);
> + irq_base = irq_start;
> + }

Hmmm. Is this code targetting the DT case or the non-DT case or both? I
think typically you'd call irq_domain_add_linear without forcing a
particular IRQ base for the DT case, and only call irq_alloc_descs() for
the non-DT case, right?

> nmk_chip->domain = irq_domain_add_legacy(np, NMK_GPIO_PER_CHIP,
> - NOMADIK_GPIO_TO_IRQ(pdata->first_gpio),
> - 0, &nmk_gpio_irq_simple_ops, nmk_chip);
> + irq_base, 0,
> + &nmk_gpio_irq_simple_ops, nmk_chip);
> if (!nmk_chip->domain) {
> dev_err(&dev->dev, "failed to create irqdomain\n");
> ret = -ENOSYS;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/