Re: [PATCH v2] arm/dts: AM33XX: Add SPI device tree data

From: Matt Porter
Date: Fri Oct 19 2012 - 07:28:50 EST


On Fri, Oct 19, 2012 at 10:24:15AM +0200, Benoit Cousson wrote:
> Hi Avinash,
>
> This look good to me except the: status = "disabled".
>
> The "disabled" should be reserved for variant that does not contain the IP.
> Is it the case here?

http://comments.gmane.org/gmane.linux.drivers.devicetree/18968 is what
I've been going by with the DTS support in the EDMA dmaengine series. It
does make the most sense to only enable what you need in the
<board>.dts.

-Matt

> On 09/18/2012 07:30 AM, Philip, Avinash wrote:
> > Add McSPI data node to AM33XX device tree file. The McSPI module (and so
> > as the driver) is reused from OMAP4.
> >
> > Signed-off-by: Philip, Avinash <avinashphilip@xxxxxx>
> > Tested-by: Matt Porter <mporter@xxxxxx>
> > ---
> > Changes since v1:
> > - Corrected reg offset in reg DT entry.
> >
> > :100644 100644 ff3badb... 065fd54... M arch/arm/boot/dts/am33xx.dtsi
> > arch/arm/boot/dts/am33xx.dtsi | 25 +++++++++++++++++++++++++
> > 1 files changed, 25 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> > index ff3badb..065fd54 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -219,5 +219,30 @@
> > interrupt-parent = <&intc>;
> > interrupts = <91>;
> > };
> > +
> > + spi0: spi@48030000 {
> > + compatible = "ti,omap4-mcspi";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x48030000 0x400>;
> > + interrupt-parent = <&intc>;
> > + interrupt = <65>;
> > + ti,spi-num-cs = <2>;
> > + ti,hwmods = "spi0";
> > + status = "disabled";
> > +
> > + };
> > +
> > + spi1: spi@481a0000 {
> > + compatible = "ti,omap4-mcspi";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x481a0000 0x400>;
> > + interrupt-parent = <&intc>;
> > + interrupt = <125>;
> > + ti,spi-num-cs = <2>;
> > + ti,hwmods = "spi1";
> > + status = "disabled";
> > + };
> > };
> > };
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/