Re: [PATCH v2 2/4] zynq: move static peripheral mappings

From: Nick Bowler
Date: Wed Oct 24 2012 - 16:19:23 EST


On 2012-10-23 18:42 -0500, Josh Cartwright wrote:
> On Tue, Oct 23, 2012 at 04:27:03PM -0400, Nick Bowler wrote:
> > Just FYI, I sent a patch to fix the same bug a while back
> >
> > https://patchwork.kernel.org/patch/1156361/
> >
> > together with other patches to fix early printk on the ZC702 serial
> > console. Admittedly, I dropped the ball on these as other issues
> > came up so I was away from the Zynq for a while.
> >
> > However, I'm now getting back on the Zynq and have a bunch of patches to
> > make it all work on the ZC702 board. I've respun the ZC702 early boot
> > fixes against newer git but they're obviously going to conflict with
> > this series. Should I resend them anyway?
>
> If you have other fixes for the zc702, that'd be great. Most of my
> testing has been in a qemu model; I haven't had a chance to try getting
> the zc702 booting yet.
>
> The first stumbling block is that it looks like the secondary uart is
> the primary uart on the zc702.

Yes, that is indeed the case, and was what I tried to address with my
earlier patches.

> > I also have a DT binding for the TTC driver, I can send that.
>
> That'd be great!

OK, I will respin and test this stuff on top of your v4 series and send
them out.

Cheers,
--
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/