Re: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support

[Benoit Cousson]

Hi Avinash,

On 10/30/2012 10:41 AM, Philip, Avinash wrote:
> On Mon, Oct 29, 2012 at 14:40:02, Philip, Avinash wrote:
>> On Thu, Oct 18, 2012 at 18:56:55, Porter, Matt wrote:
>>> Adds AM33XX SPI support for am335x-bone and am335x-evm.
> 
> Matt,
> 
> Can you build SPI DT patch with DMA support on top of SPI DT patch
> I submitted [1]. With the patch [1] SPI can work on PIO mode.
> So we can have basic SPI support available in 3.8.
> 
> Benoit,
> Can you accept the SPI DT patch [1]

Yes, I've just applied it in for_3.8/dts branch

> In case if you want I will resubmit a patch with subject line modified.

No, that's fine.

Thanks,
Benoit

> 
> Current subject line
> arm/dts: AM33XX: Add SPI device tree data
> 
> 1. https://patchwork.kernel.org/patch/1470661/
> 
> Thanks
> Avinash
> 
>>>
>>> Signed-off-by: Matt Porter <mporter@xxxxxx>
>>> ---
>>>  arch/arm/boot/dts/am335x-bone.dts |   17 +++++++++++++++
>>>  arch/arm/boot/dts/am335x-evm.dts  |    9 ++++++++
>>>  arch/arm/boot/dts/am33xx.dtsi     |   43 +++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 69 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>>> index 5510979..23edfd8 100644
>>> --- a/arch/arm/boot/dts/am335x-bone.dts
>>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>>> @@ -18,6 +18,17 @@
>>>  		reg = <0x80000000 0x10000000>; /* 256 MB */
>>>  	};
>>>  
>>> +	am3358_pinmux: pinmux@44e10800 {
>>> +		spi1_pins: pinmux_spi1_pins {
>>> +			pinctrl-single,pins = <
>>> +				0x190 0x13	/* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */
>>> +				0x194 0x33	/* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
>>> +				0x198 0x13	/* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
>>> +				0x19c 0x13	/* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
>>> +			>;
>>> +		};
>>> +	};
>>> +
>>
>> Change to am33xx_pinmux.
>>
>>>  	ocp {
>>>  		uart1: serial@44e09000 {
>>>  			status = "okay";
>>> @@ -84,3 +95,9 @@
>>>  &mmc1 {
>>>  	vmmc-supply = <&ldo3_reg>;
>>>  };
>>> +
>>> +&spi1 {
>>> +	status = "okay";
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&spi1_pins>;
>>> +};
>>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
>>> index d63fce8..8d5f660 100644
>>> --- a/arch/arm/boot/dts/am335x-evm.dts
>>> +++ b/arch/arm/boot/dts/am335x-evm.dts
>>> @@ -124,3 +124,12 @@
>>>  &mmc1 {
>>>  	vmmc-supply = <&vmmc_reg>;
>>>  };
>>> +
>>> +&spi0 {
>>> +	status = "okay";
>>> +	spi-flash@0 {
>>> +		compatible = "spansion,s25fl064k", "m25p80";
>>> +		spi-max-frequency = <24000000>;
>>> +		reg = <0>;
>>> +	};
>>> +};
>>
>> In AM335x-evm, SPI flash available in profile #2 (am335x evm specific profiles).
>> So can you drop this changes as if I understood correctly, am335x-evm.dts will be
>> populated for devices present only on profile #0.
>>
>>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>>> index 26a6af7..063ecea 100644
>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>> @@ -40,6 +40,15 @@
>>>  		};
>>>  	};
>>>  
>>> +	am3358_pinmux: pinmux@44e10800 {
>>> +		compatible = "pinctrl-single";
>>> +		reg = <0x44e10800 0x0238>;
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>> +		pinctrl-single,register-width = <32>;
>>> +		pinctrl-single,function-mask = <0x7f>;
>>> +	};
>>> +
>>
>> Pin ctrl support already submitted
>> http://git.kernel.org/?p=linux/kernel/git/bcousson/linux-omap-dt.git;a=commitdiff;h=3e0603e905d9ba662e8c1885ecb1d28bc454e448
>>
>> Thanks
>> Avinash
>>
>>>  	/*
>>>  	 * XXX: Use a flat representation of the AM33XX interconnect.
>>>  	 * The real AM33XX interconnect network is quite complex.Since
>>> @@ -261,6 +270,40 @@
>>>  			status = "disabled";
>>>  		};
>>>  
>>> +		spi0: spi@48030000 {
>>> +			compatible = "ti,omap4-mcspi";
>>> +			ti,hwmods = "spi0";
>>> +			#address-cells = <1>;
>>> +			#size-cells = <0>;
>>> +			reg = <0x48030000 0x400>;
>>> +			interrupt-parent = <&intc>;
>>> +			interrupt = <65>;
>>> +			dmas = <&edma 16
>>> +				&edma 17
>>> +				&edma 18
>>> +				&edma 19>;
>>> +			dma-names = "tx0", "rx0", "tx1", "rx1";
>>> +			ti,spi-num-cs = <2>;
>>> +			status = "disabled";
>>> +		};
>>> +
>>> +		spi1: spi@481a0000 {
>>> +			compatible = "ti,omap4-mcspi";
>>> +			ti,hwmods = "spi1";
>>> +			#address-cells = <1>;
>>> +			#size-cells = <0>;
>>> +			reg = <0x481a0000 0x400>;
>>> +			interrupt-parent = <&intc>;
>>> +			interrupt = <125>;
>>> +			dmas = <&edma 42
>>> +				&edma 43
>>> +				&edma 44
>>> +				&edma 45>;
>>> +			dma-names = "tx0", "rx0", "tx1", "rx1";
>>> +			ti,spi-num-cs = <2>;
>>> +			status = "disabled";
>>> +		};
>>> +
>>>  		wdt2: wdt@44e35000 {
>>>  			compatible = "ti,omap3-wdt";
>>>  			ti,hwmods = "wd_timer2";
>>> -- 
>>> 1.7.9.5
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>
>>
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/