Re: [PATCH v3 05/11] clk: davinci - add dm644x clock initialization

[Sekhar Nori]

On 10/25/2012 9:41 PM, Murali Karicheri wrote:
> This patch adds dm644x clock initialization code that consists of
> clocks data for various clocks and clock register callouts to
> various clock drivers. It uses following clk drivers for this
> 
>  1. clk-fixed-rate - for ref clock
>  2. clk-mux - for mux at the input and output of main pll
>  3. davinci specific clk-pll for main pll clock
>  4. davinci specific clk-div for pll divider clock
>  5. clk-fixed-factor for fixed factor clock such as auxclk
>  6. davinci specific clk-psc for psc clocks
> 
> This patch also moves all of the PLL and PSC register definitions
> from clock.h and psc.h under davinci to the clk/davinci folder so
> that various soc specific clock initialization code can share these
> definitions.

Except this patch does not move the defines, it creates a copy of them
(which is bad since you quickly lose track of which is the correct
copy). Is this done to avoid including mach/ header files here? It will
actually be better to include the mach/ files here as a temporary
solution and then remove the include mach/ files once all the SoCs have
been converted over.

> Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
> ---
>  drivers/clk/davinci/dm644x-clock.c |  304 ++++++++++++++++++++++++++++++++++++
>  drivers/clk/davinci/pll.h          |   83 ++++++++++
>  drivers/clk/davinci/psc.h          |  215 +++++++++++++++++++++++++
>  3 files changed, 602 insertions(+)
>  create mode 100644 drivers/clk/davinci/dm644x-clock.c
>  create mode 100644 drivers/clk/davinci/pll.h
>  create mode 100644 drivers/clk/davinci/psc.h
> 

> +/* all clocks available in DM644x SoCs */
> +enum dm644x_clk {
> +	clkin, oscin, ref_clk_mux, pll1, pll1_plldiv_clk_mux, auxclk,
> +	clk_pll1_sysclk1, clk_pll1_sysclk2, clk_pll1_sysclk3, clk_pll1_sysclk4,
> +	clk_pll1_sysclk5, clk_pll1_sysclkbp, pll2, pll2_plldiv_clk_mux,
> +	clk_pll2_sysclk1, clk_pll2_sysclk2, clk_pll2_sysclkbp, dsp, arm, vicp,
> +	vpss_master, vpss_slave, uart0, uart1, uart2, emac, i2c, ide, asp,
> +	mmcsd, spi, gpio, usb, vlynq, aemif, pwm0, pwm1, pwm2, timer0, timer1,
> +	timer2, clk_max
> +};
> +
> +static struct davinci_clk *psc_clocks[] = {
> +	&clk_dsp, &clk_arm, &clk_vicp, &clk_vpss_master, &clk_vpss_slave,
> +	&clk_uart0, &clk_uart1, &clk_uart2, &clk_emac, &clk_i2c, &clk_ide,
> +	&clk_asp0, &clk_mmcsd, &clk_spi, &clk_gpio, &clk_usb, &clk_vlynq,
> +	&clk_aemif, &clk_pwm0, &clk_pwm1, &clk_pwm2, &clk_timer0, &clk_timer1,
> +	&clk_timer2
> +};

You rely on perfect order between this array and dm644x_clk enum above.
Can you initialize this array using the enum as the index so that it is
clear. Current method is too error prone.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/