Re: [PATCH 3/3] i2c / ACPI: add ACPI enumeration support

[Mika Westerberg]

On Sat, Nov 03, 2012 at 10:52:46PM +0100, Jean Delvare wrote:
> On Sat,  3 Nov 2012 09:46:33 +0200, Mika Westerberg wrote:
> > ACPI 5 introduced I2cSerialBus resource that makes it possible to enumerate
> > and configure the I2C slave devices behind the I2C controller. This patch
> > adds helper functions to support I2C slave enumeration.
> > 
> > An ACPI enabled I2C controller driver only needs to call acpi_i2c_register_devices()
> > in order to get its slave devices enumerated, created and bound to the
> > corresponding ACPI handle.
> 
> I'm very happy to finally see this happen. Out of curiosity, did you
> try that code with an actual ACPI implementation?

Yes, it was tested on a real hardware with ACPI 5 support.

> 
> Light review below:
> 
> > 
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > ---
> >  drivers/acpi/Kconfig     |    6 ++
> >  drivers/acpi/Makefile    |    1 +
> >  drivers/acpi/acpi_i2c.c  |  234 ++++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/i2c/i2c-core.c   |    9 ++
> >  include/linux/acpi_i2c.h |   29 ++++++
> >  5 files changed, 279 insertions(+)
> >  create mode 100644 drivers/acpi/acpi_i2c.c
> >  create mode 100644 include/linux/acpi_i2c.h
> > 
> > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> > index 119d58d..0300bf6 100644
> > --- a/drivers/acpi/Kconfig
> > +++ b/drivers/acpi/Kconfig
> > @@ -181,6 +181,12 @@ config ACPI_DOCK
> >  	  This driver supports ACPI-controlled docking stations and removable
> >  	  drive bays such as the IBM Ultrabay and the Dell Module Bay.
> >  
> > +config ACPI_I2C
> > +	def_tristate I2C
> > +	depends on I2C
> > +	help
> > +	  ACPI I2C enumeration support.
> > +
> >  config ACPI_PROCESSOR
> >  	tristate "Processor"
> >  	select THERMAL
> > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> > index a7badb5..8573346 100644
> > --- a/drivers/acpi/Makefile
> > +++ b/drivers/acpi/Makefile
> > @@ -69,6 +69,7 @@ obj-$(CONFIG_ACPI_HED)		+= hed.o
> >  obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
> >  obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
> >  obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
> > +obj-$(CONFIG_ACPI_I2C)		+= acpi_i2c.o
> >  
> >  # processor has its own "processor." module_param namespace
> >  processor-y			:= processor_driver.o processor_throttling.o
> > diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c
> > new file mode 100644
> > index 0000000..dc6997e
> > --- /dev/null
> > +++ b/drivers/acpi/acpi_i2c.c
> > @@ -0,0 +1,234 @@
> > +/*
> > + * ACPI I2C enumeration support
> > + *
> > + * Copyright (C) 2012, Intel Corporation
> > + * Author: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> 
> You also need <linux/device.h> for dev_err() etc., and <linux/err.h> for
> ENODEV etc.

I think <acpi.h> already includes <device.h> but I'll double check. At
least this compiles without those headers in place :)

> > +
> > +struct acpi_i2c {
> > +	acpi_status (*callback)(struct acpi_device *, void *);
> > +	void *data;
> > +};
> > +
> > +static acpi_status acpi_i2c_enumerate_device(acpi_handle handle, u32 level,
> > +					     void *data, void **return_value)
> > +{
> > +	struct acpi_i2c *acpi_i2c = data;
> > +	struct acpi_device *adev;
> > +
> > +	if (acpi_bus_get_device(handle, &adev))
> > +		return AE_OK;
> > +	if (acpi_bus_get_status(adev) || !adev->status.present)
> > +		return AE_OK;
> > +
> > +	return acpi_i2c->callback(adev, acpi_i2c->data);
> > +}
> > +
> > +static acpi_status acpi_i2c_enumerate(acpi_handle handle,
> > +	acpi_status (*callback)(struct acpi_device *, void *), void *data)
> > +{
> > +	struct acpi_i2c acpi_i2c;
> > +
> > +	acpi_i2c.callback = callback;
> > +	acpi_i2c.data = data;
> > +
> > +	return acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
> > +				   acpi_i2c_enumerate_device, NULL,
> > +				   &acpi_i2c, NULL);
> > +}
> > +
> > +struct acpi_i2c_device_info {
> > +	struct i2c_board_info board;
> > +	int triggering;
> > +	int polarity;
> > +	int gsi;
> > +	bool valid;
> > +};
> > +
> > +static acpi_status acpi_i2c_add_resources(struct acpi_resource *res, void *data)
> > +{
> > +	struct acpi_i2c_device_info *info = data;
> > +	struct acpi_resource_i2c_serialbus *sb;
> > +
> > +	switch (res->type) {
> > +	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
> > +		sb = &res->data.i2c_serial_bus;
> > +		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
> > +			info->board.addr = sb->slave_address;
> > +			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
> > +				info->board.flags |= I2C_CLIENT_TEN;
> > +
> > +			/*
> > +			 * The info is valid once we have found the
> > +			 * I2CSerialBus resource.
> > +			 */
> > +			info->valid = true;
> > +		}
> > +		break;
> > +
> > +	case ACPI_RESOURCE_TYPE_IRQ:
> > +		info->gsi = res->data.irq.interrupts[0];
> > +		info->triggering = res->data.irq.triggering;
> > +		info->polarity = res->data.irq.polarity;
> > +		break;
> > +
> > +	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
> > +		info->gsi = res->data.extended_irq.interrupts[0];
> > +		info->triggering = res->data.extended_irq.triggering;
> > +		info->polarity = res->data.extended_irq.polarity;
> > +		break;
> > +	}
> > +
> > +	return AE_OK;
> > +}
> > +
> > +static acpi_status acpi_i2c_add_device(struct acpi_device *adev, void *data)
> > +{
> > +	struct acpi_i2c_device_info info;
> > +	struct i2c_adapter *adapter = data;
> > +	acpi_status status;
> > +
> > +	memset(&info, 0, sizeof(info));
> > +	info.gsi = -1;
> > +
> > +	status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
> > +				     acpi_i2c_add_resources, &info);
> > +	if (ACPI_FAILURE(status) || !info.valid)
> > +		return status;
> > +
> > +	strlcpy(info.board.type, acpi_device_hid(adev),
> > +		sizeof(info.board.type));
> 
> I very much doubt the ACPI HID names will match the Linux i2c device
> names. In other words you are instantiating devices no driver will want
> to bind to. How do you plan to solve this issue?

We use ACPI IDs (_HID, _CID) for matching in a similar way than the Device
Tree does. Typicaly you add following code to the existing I2C driver:

#ifdef CONFIG_ACPI
static struct acpi_device_id mydrv_acpi_match[] = {
	{ "CHRGR00", 0 },
	...
	{ }
};
MODULE_DEVICE_TABLE(acpi, mydrv_acpi_match);
#endif

static struct i2c_driver mydrv = {
	.driver = {
		.acpi_match_table = ACPI_PTR(mydrv_acpi_match),
	},
	...
};

in order to get the driver matched to the device. If the driver needs to
perform some ACPI specific things, like call _DSM method - it gets the ACPI
handle from dev->acpi_handle (analoguous to Device Tree dev->of_node).

The same thing applies to platform and SPI busses as well.

> > +	if (info.gsi >= 0)
> > +		info.board.irq = acpi_register_gsi(&adev->dev, info.gsi,
> > +						   info.triggering,
> > +						   info.polarity);
> > +
> > +	request_module("%s%s", I2C_MODULE_PREFIX, info.board.type);
> > +	if (!i2c_new_device(adapter, &info.board)) {
> > +		dev_err(&adapter->dev, "failed to add i2c device from ACPI\n");
> > +		if (info.gsi >= 0)
> > +			acpi_unregister_gsi(info.gsi);
> > +	}
> > +
> > +	return AE_OK;
> > +}
> > +
> > +/**
> > + * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
> > + * @adapter: pointer to adapter
> > + *
> > + * Enumerate all I2C slave devices behind this adapter by walking the ACPI
> > + * namespace. When a device is found it will be added to the Linux device
> > + * model and bound to the corresponding ACPI handle.
> > + */
> > +void acpi_i2c_register_devices(struct i2c_adapter *adapter)
> > +{
> > +	acpi_handle handle;
> > +	acpi_status status;
> > +
> > +	handle = adapter->dev.acpi_handle;
> > +	if (!handle)
> > +		return;
> > +
> > +	status = acpi_i2c_enumerate(handle, acpi_i2c_add_device, adapter);
> > +	if (ACPI_FAILURE(status))
> > +		dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
> > +}
> > +EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);
> > +
> > +struct acpi_i2c_find {
> > +	acpi_handle handle;
> > +	u16 addr;
> > +	bool found;
> > +};
> > +
> > +static acpi_status acpi_i2c_find_child_address(struct acpi_resource *res,
> > +					       void *data)
> > +{
> > +	struct acpi_resource_i2c_serialbus *sb;
> > +	struct acpi_i2c_find *i2c_find = data;
> > +
> > +	if (res->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
> > +		return AE_OK;
> > +
> > +	sb = &res->data.i2c_serial_bus;
> > +	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
> > +		return AE_OK;
> > +
> > +	if (sb->slave_address == i2c_find->addr) {
> > +		i2c_find->found = true;
> > +		return AE_CTRL_TERMINATE;
> > +	}
> > +
> > +	return AE_OK;
> > +}
> > +
> > +static acpi_status acpi_i2c_find_child(struct acpi_device *adev, void *data)
> > +{
> > +	struct acpi_i2c_find *i2c_find = data;
> > +	acpi_status status;
> > +
> > +	status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
> > +				     acpi_i2c_find_child_address, i2c_find);
> > +	if (ACPI_FAILURE(status) || !i2c_find->found)
> > +		return status;
> > +
> > +	i2c_find->handle = adev->handle;
> > +	return AE_CTRL_TERMINATE;
> > +}
> > +
> > +static int acpi_i2c_find_device(struct device *dev, acpi_handle *handle)
> > +{
> > +	struct acpi_i2c_find i2c_find;
> > +	struct i2c_adapter *adapter;
> > +	struct i2c_client *client;
> > +	acpi_handle parent;
> > +	acpi_status status;
> > +
> > +	client = i2c_verify_client(dev);
> > +	if (!client)
> > +		return -ENODEV;
> > +
> > +	adapter = client->adapter;
> > +	if (!adapter)
> > +		return -ENODEV;
> > +
> > +	parent = adapter->dev.acpi_handle;
> > +	if (!parent)
> > +		return -ENODEV;
> > +
> > +	memset(&i2c_find, 0, sizeof(i2c_find));
> > +	i2c_find.addr = client->addr;
> > +
> > +	status = acpi_i2c_enumerate(parent, acpi_i2c_find_child, &i2c_find);
> > +	if (ACPI_FAILURE(status) || !i2c_find.handle)
> > +		return -ENODEV;
> > +
> > +	*handle = i2c_find.handle;
> > +	return 0;
> > +}
> > +
> > +static struct acpi_bus_type acpi_i2c_bus = {
> > +	.bus = &i2c_bus_type,
> > +	.find_device = acpi_i2c_find_device,
> > +};
> > +
> > +void acpi_i2c_bus_register(void)
> > +{
> > +	register_acpi_bus_type(&acpi_i2c_bus);
> > +}
> > +EXPORT_SYMBOL_GPL(acpi_i2c_bus_register);
> > +
> > +void acpi_i2c_bus_unregister(void)
> > +{
> > +	unregister_acpi_bus_type(&acpi_i2c_bus);
> > +}
> > +EXPORT_SYMBOL_GPL(acpi_i2c_bus_unregister);
> > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> > index a7edf98..8b9d6fb 100644
> > --- a/drivers/i2c/i2c-core.c
> > +++ b/drivers/i2c/i2c-core.c
> > @@ -39,6 +39,7 @@
> >  #include <linux/irqflags.h>
> >  #include <linux/rwsem.h>
> >  #include <linux/pm_runtime.h>
> > +#include <linux/acpi_i2c.h>
> >  #include <asm/uaccess.h>
> >  
> >  #include "i2c-core.h"
> > @@ -78,6 +79,10 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
> >  	if (of_driver_match_device(dev, drv))
> >  		return 1;
> >  
> > +	/* Then ACPI style match */
> > +	if (acpi_driver_match_device(dev, drv))
> > +		return 1;
> > +
> >  	driver = to_i2c_driver(drv);
> >  	/* match on an id table if there is one */
> >  	if (driver->id_table)
> > @@ -1298,6 +1303,8 @@ static int __init i2c_init(void)
> >  	retval = i2c_add_driver(&dummy_driver);
> >  	if (retval)
> >  		goto class_err;
> > +
> > +	acpi_i2c_bus_register();
> >  	return 0;
> >  
> >  class_err:
> > @@ -1311,6 +1318,8 @@ bus_err:
> >  
> >  static void __exit i2c_exit(void)
> >  {
> > +	acpi_i2c_bus_unregister();
> > +
> >  	i2c_del_driver(&dummy_driver);
> >  #ifdef CONFIG_I2C_COMPAT
> >  	class_compat_unregister(i2c_adapter_compat_class);
> > diff --git a/include/linux/acpi_i2c.h b/include/linux/acpi_i2c.h
> > new file mode 100644
> > index 0000000..d4482df
> > --- /dev/null
> > +++ b/include/linux/acpi_i2c.h
> > @@ -0,0 +1,29 @@
> > +/*
> > + * ACPI I2C enumeration support
> > + *
> > + * Copyright (C) 2012, Intel Corporation
> > + * Author: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef LINUX_ACPI_I2C_H
> > +#define LINUX_ACPI_I2C_H
> > +
> > +#include <linux/acpi.h>
> 
> What for?

No reason, I'll remove that.

> 
> > +struct i2c_adapter;
> > +
> > +#if defined(CONFIG_ACPI_I2C) || defined(CONFIG_ACPI_I2C_MODULE)
> > +extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
> > +extern void acpi_i2c_bus_register(void);
> > +extern void acpi_i2c_bus_unregister(void);
> > +#else
> > +static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
> > +static inline void acpi_i2c_bus_register(void) {}
> > +static inline void acpi_i2c_bus_unregister(void) {}
> > +#endif /* CONFIG_ACPI_I2C */
> > +
> > +#endif /* LINUX_ACPI_I2C_H */
> 
> 
> -- 
> Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/