[PATCH 1/1] arch Kconfig: remove references to IRQ_PER_CPU

From: James Hogan
Date: Tue Nov 13 2012 - 07:01:12 EST


The IRQ_PER_CPU Kconfig symbol was removed in the following commit:

Commit 6a58fb3bad099076f36f0f30f44507bc3275cdb6 ("genirq: Remove
CONFIG_IRQ_PER_CPU") merged in v2.6.39-rc1.

But IRQ_PER_CPU wasn't removed from any of the architecture Kconfig
files where it was defined or selected. It's completely unused so remove
the remaining references.

Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Mike Frysinger <vapier@xxxxxxxxxx>
Cc: Richard Kuo <rkuo@xxxxxxxxxxxxxx>
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: Fenghua Yu <fenghua.yu@xxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxxxxx>
Cc: Helge Deller <deller@xxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Paul Mackerras <paulus@xxxxxxxxx>
Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
---
Based on v3.7-rc5.

Compile tested defconfigs for bfin, ia64, mips, parisc, powerpc, sh, but
not hexagon.

Grepped entire tree to check no references to CONFIG_IRQ_PER_CPU, and
grepped arch/ for Kconfig files referencing IRQ_PER_CPU.

arch/blackfin/Kconfig | 1 -
arch/hexagon/Kconfig | 1 -
arch/ia64/Kconfig | 1 -
arch/mips/Kconfig | 1 -
arch/parisc/Kconfig | 1 -
arch/powerpc/Kconfig | 1 -
arch/sh/Kconfig | 3 ---
7 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b6f3ad5..c709715 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -38,7 +38,6 @@ config BLACKFIN
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
- select IRQ_PER_CPU if SMP
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 0744f7d..800dd9c 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -12,7 +12,6 @@ config HEXAGON
# select ARCH_WANT_OPTIONAL_GPIOLIB
# select ARCH_REQUIRE_GPIOLIB
# select HAVE_CLK
- # select IRQ_PER_CPU
# select GENERIC_PENDING_IRQ if SMP
select HAVE_IRQ_WORK
select GENERIC_ATOMIC64
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3279646..00c2e88 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -29,7 +29,6 @@ config IA64
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
- select IRQ_PER_CPU
select GENERIC_IRQ_SHOW
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dba9390..d47de79 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2197,7 +2197,6 @@ source "mm/Kconfig"
config SMP
bool "Multi-Processing support"
depends on SYS_SUPPORTS_SMP
- select IRQ_PER_CPU
select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 11def45..6d37987 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,7 +16,6 @@ config PARISC
select BROKEN_RODATA
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP
- select IRQ_PER_CPU
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a902a5c..721dd7b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -125,7 +125,6 @@ config PPC
select HAVE_GENERIC_HARDIRQS
select ARCH_WANT_IPC_PARSE_VERSION
select SPARSE_IRQ
- select IRQ_PER_CPU
select IRQ_DOMAIN
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index babc2b8..6f799ec 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -91,9 +91,6 @@ config GENERIC_CSUM
config GENERIC_HWEIGHT
def_bool y

-config IRQ_PER_CPU
- def_bool y
-
config GENERIC_GPIO
def_bool n

--
1.7.7.6


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/