Re: [PATCH v6] staging: ste_rmi4: Convert to Type-B support

[Henrik Rydberg]

Hi Alexandra,

> Convert to MT-B because Synaptics touch devices are capable
> of tracking identifiable fingers.
>  
> Signed-off-by: Alexandra Chin <alexandra.chin@xxxxxxxxxxxxxxxx>
> ---
> This patch was tested on Pandaboard.

Thank you for making changes. One minor comment inline, but I am ok
with the patch as is.  Looks like we have finally arrived. :-)

    Reviewed-by: Henrik Rydberg <rydberg@xxxxxxxxxxx>

Thanks,
Henrik

> ---
>  drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c |   76 +++++++++++--------------
>  1 files changed, 33 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> index 277491a..ed304e0 100644
> --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> @@ -31,6 +31,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/module.h>
> +#include <linux/input/mt.h>
>  #include "synaptics_i2c_rmi4.h"
>  
>  /* TODO: for multiple device support will need a per-device mutex */
> @@ -67,7 +68,6 @@
>  #define PDT_START_SCAN_LOCATION (0x00E9)
>  #define PDT_END_SCAN_LOCATION	(0x000A)
>  #define PDT_ENTRY_SIZE		(0x0006)
> -#define RMI4_NUMBER_OF_MAX_FINGERS		(8)
>  #define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM	(0x11)
>  #define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM	(0x01)
>  
> @@ -164,6 +164,7 @@ struct synaptics_rmi4_device_info {
>   * @regulator: pointer to the regulator structure
>   * @wait: wait queue structure variable
>   * @touch_stopped: flag to stop the thread function
> + * @fingers_supported: maximum supported fingers
>   *
>   * This structure gives the device data information.
>   */
> @@ -184,6 +185,7 @@ struct synaptics_rmi4_data {
>  	struct regulator	*regulator;
>  	wait_queue_head_t	wait;
>  	bool			touch_stopped;
> +	unsigned char		fingers_supported;
>  };
>  
>  /**
> @@ -303,22 +305,21 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
>  	/* number of touch points - fingers down in this case */
>  	int	touch_count = 0;
>  	int	finger;
> -	int	fingers_supported;
>  	int	finger_registers;
>  	int	reg;
>  	int	finger_shift;
>  	int	finger_status;
>  	int	retval;
> +	int	x, y;
> +	int	wx, wy;
>  	unsigned short	data_base_addr;
>  	unsigned short	data_offset;
>  	unsigned char	data_reg_blk_size;
>  	unsigned char	values[2];
>  	unsigned char	data[DATA_LEN];
> -	int	x[RMI4_NUMBER_OF_MAX_FINGERS];
> -	int	y[RMI4_NUMBER_OF_MAX_FINGERS];
> -	int	wx[RMI4_NUMBER_OF_MAX_FINGERS];
> -	int	wy[RMI4_NUMBER_OF_MAX_FINGERS];
> +	unsigned char	fingers_supported = pdata->fingers_supported;
>  	struct	i2c_client *client = pdata->i2c_client;
> +	struct	input_dev *input_dev = pdata->input_dev;
>  
>  	/* get 2D sensor finger data */
>  	/*
> @@ -333,7 +334,6 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
>  	 *	10 = finger present but data may not be accurate,
>  	 *	11 = reserved for product use.
>  	 */
> -	fingers_supported	= rfi->num_of_data_points;
>  	finger_registers	= (fingers_supported + 3)/4;
>  	data_base_addr		= rfi->fn_desc.data_base_addr;
>  	retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
> @@ -358,7 +358,11 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
>  		 * if finger status indicates a finger is present then
>  		 * read the finger data and report it
>  		 */
> -		if (finger_status == 1 || finger_status == 2) {
> +		input_mt_slot(input_dev, finger);
> +		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
> +							finger_status != 0);
> +
> +		if (finger_status) {
>  			/* Read the finger data */
>  			data_offset = data_base_addr +
>  					((finger * data_reg_blk_size) +
> @@ -367,50 +371,33 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
>  						data_offset, data,
>  						data_reg_blk_size);
>  			if (retval != data_reg_blk_size) {
> -				printk(KERN_ERR "%s:read data failed\n",
> +				dev_err(&client->dev, "%s:read data failed\n",

Still not needed for this patch. Please try to refrain from making
unnecessary changes in the future.

>  								__func__);
>  				return 0;
> -			} else {
> -				x[touch_count]	=
> -					(data[0] << 4) | (data[2] & MASK_4BIT);
> -				y[touch_count]	=
> -					(data[1] << 4) |
> -					((data[2] >> 4) & MASK_4BIT);
> -				wy[touch_count]	=
> -						(data[3] >> 4) & MASK_4BIT;
> -				wx[touch_count]	=
> -						(data[3] & MASK_4BIT);
> -
> -				if (pdata->board->x_flip)
> -					x[touch_count] =
> -						pdata->sensor_max_x -
> -								x[touch_count];
> -				if (pdata->board->y_flip)
> -					y[touch_count] =
> -						pdata->sensor_max_y -
> -								y[touch_count];
>  			}
> +			x = (data[0] << 4) | (data[2] & MASK_4BIT);
> +			y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
> +			wy = (data[3] >> 4) & MASK_4BIT;
> +			wx = (data[3] & MASK_4BIT);
> +
> +			if (pdata->board->x_flip)
> +				x = pdata->sensor_max_x - x;
> +			if (pdata->board->y_flip)
> +				y = pdata->sensor_max_y - y;
> +
> +			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
> +								max(wx, wy));
> +			input_report_abs(input_dev, ABS_MT_POSITION_X, x);
> +			input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
> +
>  			/* number of active touch points */
>  			touch_count++;
>  		}
>  	}
>  
> -	/* report to input subsystem */
> -	if (touch_count) {
> -		for (finger = 0; finger < touch_count; finger++) {
> -			input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
> -						max(wx[finger] , wy[finger]));
> -			input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
> -								x[finger]);
> -			input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
> -								y[finger]);
> -			input_mt_sync(pdata->input_dev);
> -		}
> -	} else
> -		input_mt_sync(pdata->input_dev);
> -
>  	/* sync after groups of events */
> -	input_sync(pdata->input_dev);
> +	input_mt_sync_frame(input_dev);
> +	input_sync(input_dev);
>  	/* return the number of touch points */
>  	return touch_count;
>  }
> @@ -575,6 +562,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
>  		if ((queries[1] & MASK_3BIT) == 5)
>  			rfi->num_of_data_points = 10;
>  	}
> +	pdata->fingers_supported = rfi->num_of_data_points;
>  	/* Need to get interrupt info for handling interrupts */
>  	rfi->index_to_intr_reg = (interruptcount + 7)/8;
>  	if (rfi->index_to_intr_reg != 0)
> @@ -988,6 +976,8 @@ static int __devinit synaptics_rmi4_probe
>  					rmi4_data->sensor_max_y, 0, 0);
>  	input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
>  						MAX_TOUCH_MAJOR, 0, 0);
> +	input_mt_init_slots(rmi4_data->input_dev,
> +				rmi4_data->fingers_supported, 0);
>  
>  	/* Clear interrupts */
>  	synaptics_rmi4_i2c_block_read(rmi4_data,
> -- 
> 1.7.5.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/