Re: [PATCH v2 0/3] mtd: nand: OMAP: ELM error correction supportfor BCH ecc

[Artem Bityutskiy]

On Wed, 2012-11-21 at 07:01 +0000, Philip, Avinash wrote:
> > I am not sure how this dependency has to be handled for this series,
> > let me know whether you still want it to be made over l2-mtd?
> 
> Artem,
> 
> Is it possible for you to give ack for these patches so that these patches
> can go in Tony's tree where Omap-gpmc changes are present?

I would prefer if people like Ivan could take a look at this first.

Also, I am not sure this is a good idea. Or at least we should agree on
some common strategy for bit-flips in the erased areas:

"+ * 1. If page is erased, check with standard ecc vector (ecc vector
+ * for erased page to find any bit flip). If check fails, bit flip
+ * is present in erased page. Count the bit flips in erased page and
+ * if it falls under correctable level, report page with 0xFF and
+ * update the correctable bit information."

Basically, you are working-around JFFS2 limitations.

Do you suggest we do this in all the drivers?

If we want to do this, may be we better do this in higher level, common
to all drivers?

-- 
Best Regards,
Artem Bityutskiy

Attachment: signature.asc
Description: This is a digitally signed message part