Re: [PATCH] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency

From: Chris Ball
Date: Thu Nov 22 2012 - 15:56:20 EST


Hi Manoj, Matsumuro-san,

On Mon, Jul 18 2011, Manoj Iyer wrote:
> Right, without the patch I get..
>
> [ 52.526665] mmc0: new SDHC card at address e624
> [ 52.571228] mmcblk0: mmc0:e624 SD16G 14.8 GiB
> [ 52.591071] mmcblk0: retrying using single block read
> [ 52.593105] mmcblk0: error -84 transferring data, sector 0, nr 8,
> card status 0x900
> [ 52.593109] end_request: I/O error, dev mmcblk0, sector 0
> [ 52.594594] mmcblk0: error -84 transferring data, sector 1, nr 7,
> card status 0x900
> [ 52.594604] end_request: I/O error, dev mmcblk0, sector 1
> [ 52.602893] quiet_error: 24 callbacks suppressed
> [ 52.602902] Buffer I/O error on device mmcblk0, logical block 0
> [ 52.605349] ldm_validate_partition_table(): Disk read failed.
> [ 52.605384] Dev mmcblk0: unable to read RDB block 0
> [ 52.607729] mmcblk0: unable to read partition table
> u@u:~$
>
> So, I cannot generate any comparison data with this SD card.

I don't know if you remember this bug, but I have reports from two users
who see "error -84"s on :e823 controllers even with this patch active on
modern ThinkPads.

Maybe 50MHz isn't low enough sometimes? Is it possible to lower the base
clock further?

I noticed that the frequency is encoded ine one of the PCI writes:
+ * 0x32 - 50Mhz new clock frequency

So if I get access to one of these systems, I might try lowering that
value (by half, say) and see what happens. But at the moment I haven't
found someone who's willing to try kernel patches yet, and I don't have
one of these systems myself.

Thanks!

- Chris.
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/