Re: Re: Re: Re: Re: Re: [RFC PATCH 0/2] kvm/vmx: Output TSC offset
From: Yoshihiro YUNOMAE
Date: Tue Nov 27 2012 - 05:53:50 EST
Hi Marcelo,
(2012/11/27 8:16), Marcelo Tosatti wrote:
On Mon, Nov 26, 2012 at 08:05:10PM +0900, Yoshihiro YUNOMAE wrote:
500h. event tsc_write tsc_offset=-3000
Then a guest trace containing events with a TSC timestamp.
Which tsc_offset to use?
(that is the problem, which unless i am mistaken can only be solved
easily if the guest can convert RDTSC -> TSC of host).
There are three following cases of changing TSC offset:
1. Reset TSC at guest boot time
2. Adjust TSC offset due to some host's problems
3. Write TSC on guests
The scenario which you mentioned is case 3, so we'll discuss this case.
Here, we assume that a guest is allocated single CPU for the sake of
ease.
If a guest executes write_tsc, TSC values jumps to forward or backward.
For the forward case, trace data are as follows:
< host > < guest >
cycles events cycles events
3000 tsc_offset=-2950
3001 kvm_enter
53 eventX
....
100 (write_tsc=+900)
3060 kvm_exit
3075 tsc_offset=-2050
3080 kvm_enter
1050 event1
1055 event2
...
This case is simple. The guest TSC of the first kvm_enter is calculated
as follows:
(host TSC of kvm_enter) + (current tsc_offset) = 3001 - 2950 = 51
Similarly, the guest TSC of the second kvm_enter is 130. So, the guest
events between 51 and 130, that is, 53 eventX is inserted between the
first pair of kvm_enter and kvm_exit. To insert events of the guests
between 51 and 130, we convert the guest TSC to the host TSC using TSC
offset 2950.
For the backward case, trace data are as follows:
< host > < guest >
cycles events cycles events
3000 tsc_offset=-2950
3001 kvm_enter
53 eventX
....
100 (write_tsc=-50)
3060 kvm_exit
3075 tsc_offset=-2050
3080 kvm_enter
90 event1
95 event2
...
3400 100 (write_tsc=-50)
90 event3
95 event4
As you say, in this case, the previous method is invalid. When we
calculate the guest TSC value for the tsc_offset=-3000 event, the value
is 75 on the guest. This seems like prior event of write_tsc=-50 event.
So, we need to consider more.
In this case, it is important that we can understand where the guest
executes write_tsc or the host rewrites the TSC offset. write_tsc on
the guest equals wrmsr 0x00000010, so this instruction induces vm_exit.
This implies that the guest does not operate when the host changes TSC
offset on the cpu. In other words, the guest cannot use new TSC before
the host rewrites the new TSC offset. So, if timestamp on the guest is
not monotonically increased, we can understand the guest executes
write_tsc. Moreover, in the region where timestamp is decreasing, we
can understand when the host rewrote the TSC offset in the guest trace
data. Therefore, we can sort trace data in chronological order.
This requires an entire trace of events. That is, to be able
to reconstruct timeline you require the entire trace from the moment
guest starts. So that you can correlate wrmsr-to-tsc on the guest with
vmexit-due-to-tsc-write on the host.
Which means that running out of space for trace buffer equals losing
ability to order events.
Is that desirable? It seems cumbersome to me.
As you say, tracing events can overwrite important events like
kvm_exit/entry or write_tsc_offset. So, Steven's multiple buffer is
needed by this feature. Normal events which often hit record the buffer
A, and important events which rarely hit record the buffer B. In our
case, the important event is write_tsc_offset.
Also the need to correlate each write_tsc event in the guest trace
with a corresponding tsc_offset write in the host trace means that it
is _necessary_ for the guest and host to enable tracing simultaneously.
Correct?
Also, there are WRMSR executions in the guest for which there is
no event in the trace buffer. From SeaBIOS, during boot.
In that case, there is no explicit event in the guest trace which you
can correlate with tsc_offset changes in the host side.
I understand that you want to say, but we don't correlate between
write_tsc event and write_tsc_offset event directly. This is because
the write_tsc tracepoint (also WRMSR instruction) is not prepared in
the current kernel. So, in the previous mail
(https://lkml.org/lkml/2012/11/22/53), I suggested the method which we
don't need to prepare the write_tsc tracepoint.
In the method, we enable ftrace before the guest boots, and we need to
keep all write_tsc_offset events in the buffer. If we forgot enabling
ftrace or we don't use multiple buffers, we don't use this feature.
Yoshihiro,
Better have a single method to convert guest TSC to host TSC.
Ok, if you keep both TSC offset write events and guest TSC writes (*)
in separate buffers which are persistent, then you can convert
guest-tsc-events to host-tsc.
Can you please write a succint but complete description of the method
so it can be verified?
Sure.
- Prerequisite
1. the host TSC is synchronized and stable.
2. kvm_write_tsc_offset events include previous and next TSC offset
values.
3. Every event's trace_clock is TSC.
- Assumption for the sake of ease
1. One VCPU
2. The guest executes no write_tsc or write_tsc only once.
- Configuration
1. On the host, kvm_exit/entry events are recorded in the buffer A and
kvm_write_tsc_offset events are recorded in the buffer B.
2. Boot a guest
- Sort method
1.
Confirm which the kvm_write_tsc_offset events are recorded except for
boot. Note that a vcpu thread writes TSC offset when boot as an initial
operation.
1-1.
If not recorded, it means that the guest did not execute write_tsc.
So, we convert the guest TSC to the host TSC using TSC offset of boot.
=> END
1-2.
If recorded, it means that the guest executed write_tsc.
So, we use new kvm_write_tsc_offset event information.
2.
We convert the host TSC(Th) of the kvm_write_tsc_offset event to
the guest TSC(Tg) using previous_tsc_offset value:
Tg = Th + previous_tsc_offset
3.
To search the point where the guest executed write_tsc, we find "n"
which satisfies the condition Tn < Tg < Tn+1 or Tn+1 < Tn < Tg from
older events of the guest. The former condition means trace data of
the guest were recorded monotonically. On the other hand, the latter
condition means trace data of the guest moved backward.
4.
We convert the guest TSC of trace data to the host TSC using
previous_tsc_offset value before "n" and using next_tsc_offset value
after "n+1".
=> END
- Note
We assumed one vcpu and no write_tsc or write_tsc only once for the
sake of ease. For other conditions, we will use similar method.
Thanks,
(*) note guest TSC writes have no events because Linux does not write
to TSC offset, but a "system booted" event can be used to correlate
with the TSC write by BIOS.
Thanks
So, I think as Peter says, the host should also export TSC offset
information to /proc/pid/kvm/*.
If the guest had access to the host TSC value, these complications
would disappear.
As a debugging mode, the TSC offset zero mode will be useful, I think.
(not for the real operation mode)
Thanks,
--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: yoshihiro.yunomae.ez@xxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
Yoshihiro YUNOMAE
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: yoshihiro.yunomae.ez@xxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/