[PATCH 2/2] rtc-tps65910: enable RTC power domain on initialization

[Kim, Milo]

 Enabling RTC HW block depends on the default value of TPS65910 register.
 In some mode, RTC block is disabled by default.(eg. AM3517 Craneboard)
 In this case, RTC_PWDN(RTC power down) bit should be cleared to enable
 the RTC HW block.

 This patch also works in case that RTC block is active by default,
 because there is no side effect even if the bit is updated again.

 Tested on AM3517 Craneboard.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@xxxxxx>
---
 drivers/rtc/rtc-tps65910.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/rtc/rtc-tps65910.c b/drivers/rtc/rtc-tps65910.c
index e8d44bc..b4d9f02 100644
--- a/drivers/rtc/rtc-tps65910.c
+++ b/drivers/rtc/rtc-tps65910.c
@@ -247,6 +247,13 @@ static int __devinit tps65910_rtc_probe(struct platform_device *pdev)
 		return ret;
 
 	dev_dbg(&pdev->dev, "Enabling rtc-tps65910.\n");
+
+	/* Enable RTC digital power domain */
+	ret = regmap_update_bits(tps65910->regmap, TPS65910_DEVCTRL,
+		DEVCTRL_RTC_PWDN_MASK, 0 << DEVCTRL_RTC_PWDN_SHIFT);
+	if (ret < 0)
+		return ret;
+
 	rtc_reg = TPS65910_RTC_CTRL_STOP_RTC;
 	ret = regmap_write(tps65910->regmap, TPS65910_RTC_CTRL, rtc_reg);
 	if (ret < 0)
-- 
1.7.9.5


Best Regards,
Milo


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/