[PATCH 0/9] tx/rx LED trigger support

From: Fabio Baltieri
Date: Sun Dec 16 2012 - 06:08:56 EST


Hi all,

this is a resend of the patch series on tx/rx LEDs trigger. The patch
set was put on hold after the latest discussions on Kurt's rename patch
due to a missing feature in the LED subsystem, which has been just
merged in:

a8df7b1 leds: add led_trigger_rename function

So, as months passed since the latest developments, I'm reposting the
whole set, rebased on current mainline. The first patches are the same
that were merged in can-next/led-trigger, but there was some (trivial)
conflict in the rebase.

As for the test, I've tried the patch on the current mainline kernel
with my custom usb-can interface. For the drivers, I don't have any
SoC-enabled board anymore, so they have only been compile tested.

Cheers,
Fabio


Fabio Baltieri (7):
can: add tx/rx LED trigger support
can: flexcan: add LED trigger support
can: at91_can: add LED trigger support
can: ti_hecc: add LED trigger support
can: c_can: add LED trigger support
can: mcp251x: add LED trigger support
can: sja1000: add LED trigger support

Kurt Van Dijck (2):
can: export a safe netdev_priv wrapper for candev
can: rename LED trigger name on netdev renames

drivers/net/can/Kconfig | 12 ++++
drivers/net/can/Makefile | 2 +
drivers/net/can/at91_can.c | 10 +++
drivers/net/can/c_can/c_can.c | 10 +++
drivers/net/can/dev.c | 18 ++++++
drivers/net/can/flexcan.c | 11 ++++
drivers/net/can/led.c | 129 ++++++++++++++++++++++++++++++++++++++
drivers/net/can/mcp251x.c | 23 +++++--
drivers/net/can/sja1000/sja1000.c | 17 ++++-
drivers/net/can/ti_hecc.c | 10 +++
include/linux/can/dev.h | 11 ++++
include/linux/can/led.h | 51 +++++++++++++++
12 files changed, 299 insertions(+), 5 deletions(-)
create mode 100644 drivers/net/can/led.c
create mode 100644 include/linux/can/led.h

--
1.7.12.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/