Re: dire state of rtl8192se driver in 3.7

[Larry Finger]

On 12/22/2012 04:55 PM, Norbert Preining wrote:
> Hi Larry,, hi all
>
> On Sa, 22 Dez 2012, Larry Finger wrote:
> > It is not that no one cares; however, your attitude does nothing to
> > induce me to work on this problem. The facts are not needed "to make
>
> Aehm, ... after my initial report you asked me several more questions,
> which I answered within a few hours. After that no as in 0 response,
> although I pinged back a few times.
>
> So am I supposed to deduce from 0 reactions that anyone is interested?
>
> > people happy", they are necessary to try to reproduce the problem. If I
> > cannot make it happen here, then I cannot fix it. Also, remember that I
>
> Disagree. I am involved in tracking down a nasty regression in the intel
> drm driver, which the intel people can *not* reproduce, but several
> other people, and after long trials and patches and converse it is
> starting to look much better.
>
> > am a volunteer. I get nothing from Realtek but starting code of varying
> > quality and some sample chips. At least my versions do not crash your
>
> Ok, that is a problem I understand. If this is the case, that it is
> a single volunteer caring for the code, then I see a real problem.
> (And I also will try to stay away from rtl wlan cards on my next laptop)
>
> > I have never tested forcing a reset on the chip the way you did. I am not
> > surprised that bad things happen.
>
> But the DMAR item I also reported points to a real problem I guess.

Yes, I would agree.

> >  From some of the material that you report, it appears that you have an
> > 802.11n connection using WPA1 encryption. (More of those pesky details!)
>
> WPA PSK, yes. I don't know the difference between WPA2 and WPA, though.

WPA2 is AES and WPA(1) is TKIP.

My device is the same as yours. The command 'lspci -nn' shows:

0e:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller [10ec:8172] (rev 10)

The B variety is a 1x2 configuration.

My signal strength is essentially the same as yours.

wlan0     IEEE 802.11bgn  ESSID:"lwfdjf-n"
          Mode:Managed  Frequency:2.422 GHz  Access Point: C0:3F:0E:BE:2B:44
          Bit Rate=18 Mb/s   Tx-Power=20 dBm
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-35 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:1943   Missed beacon:0

A throughput test with netperf shows the following for 3 second samples:

TCP_MAERTS Test:  23.73 20.80 20.87 20.62 20.50 20.62 20.19 20.67 20.70 20.75
RX Results: max 23.73, min 20.19. Mean 20.95(0.95)

TCP_STREAM Test:  20.82 26.36 25.77 25.89 26.36 26.31 26.19 26.50 26.16 25.93
TX Results: max 26.50, min 20.82. Mean 25.63(1.62)

My router does not let me change the TKIP interval, which I think means 3600 
seconds. Running a ping for ~4000 seconds results in

--- 192.168.1.1 ping statistics ---
4004 packets transmitted, 4002 received, 0% packet loss, time 4007793ms
rtt min/avg/max/mdev = 0.782/1.605/77.929/4.310 ms

Only 2 packets lost in 4000 is pretty good, and my longest return time of 77 ms 
is certainly not like you get.

My router is a Netgear WNDR3300 running firmware version V1.0.45_1.0.45NA.

These results are representative of what I have always gotten. I have no idea 
why your system is so different.

One thing to try is loading the module with option "ips=0".

Larry

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/