Re: [PATCH] mmc: host: dw_mmc-exynos: Add support for pinctrl

From: Dongjin Kim
Date: Sun Dec 30 2012 - 21:59:56 EST


Hi,

Does anyone have advice on this patch?

On Sat, Dec 22, 2012 at 2:11 AM, Dongjin Kim <tobetter@xxxxxxxxx> wrote:
> This patch adds support for pin configuration using pinctrl subsystem to
> dw_mmc-exynos driver. The property 'wp-gpios' can be specified for write
> protect but 'samsung,cd-pinmux-gpio' and gpios used for clock, command and
> data lines will be ignored.
>
> -. 'pinctrl-0' should specify pin control groups (clock, comand and data
> lines) used for this controller.
> -. 'pinctrl-names' should contain only one value, 'default'.
>
> Signed-off-by: Dongjin Kim <tobetter@xxxxxxxxx>
> ---
> drivers/mmc/host/dw_mmc-exynos.c | 44
> ++++++++++++++++++++++++--------------
> 1 file changed, 28 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc-exynos.c
> b/drivers/mmc/host/dw_mmc-exynos.c
> index 4d50da6..d1c9963 100644
> --- a/drivers/mmc/host/dw_mmc-exynos.c
> +++ b/drivers/mmc/host/dw_mmc-exynos.c
> @@ -16,6 +16,7 @@
> #include <linux/mmc/dw_mmc.h>
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> +#include <linux/pinctrl/consumer.h>
>
> #include "dw_mmc.h"
> #include "dw_mmc-pltfm.h"
> @@ -49,6 +50,7 @@ struct dw_mci_exynos_priv_data {
> u8 ciu_div;
> u32 sdr_timing;
> u32 ddr_timing;
> + struct pinctrl *pctrl;
> };
>
> static struct dw_mci_exynos_compatible {
> @@ -84,6 +86,10 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
> priv->ctrl_type = exynos_compat[idx].ctrl_type;
> }
>
> + priv->pctrl = devm_pinctrl_get_select_default(host->dev);
> + if (IS_ERR(priv->pctrl))
> + dev_dbg(host->dev, "no pinctrl node\n");
> +
> host->priv = priv;
> return 0;
> }
> @@ -149,32 +155,19 @@ static int dw_mci_exynos_parse_dt(struct dw_mci
> *host)
> return ret;
>
> priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
> +
> return 0;
> }
>
> static int dw_mci_exynos_setup_bus(struct dw_mci *host,
> struct device_node *slot_np, u8 bus_width)
> {
> + struct dw_mci_exynos_priv_data *priv = host->priv;
> int idx, gpio, ret;
>
> if (!slot_np)
> return -EINVAL;
>
> - /* cmd + clock + bus-width pins */
> - for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
> - gpio = of_get_gpio(slot_np, idx);
> - if (!gpio_is_valid(gpio)) {
> - dev_err(host->dev, "invalid gpio: %d\n", gpio);
> - return -EINVAL;
> - }
> -
> - ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
> - if (ret) {
> - dev_err(host->dev, "gpio [%d] request failed\n",
> gpio);
> - return -EBUSY;
> - }
> - }
> -
> gpio = of_get_named_gpio(slot_np, "wp-gpios", 0);
> if (gpio_is_valid(gpio)) {
> if (devm_gpio_request(host->dev, gpio, "dw-mci-wp"))
> @@ -185,9 +178,12 @@ static int dw_mci_exynos_setup_bus(struct dw_mci
> *host,
> host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT;
> }
>
> - if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
> + if (!IS_ERR(priv->pctrl))
> return 0;
>
> + if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
> + goto setup_bus;
> +
> gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
> if (gpio_is_valid(gpio)) {
> if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
> @@ -196,6 +192,22 @@ static int dw_mci_exynos_setup_bus(struct dw_mci
> *host,
> dev_info(host->dev, "cd gpio not available");
> }
>
> + setup_bus:
> + /* cmd + clock + bus-width pins */
> + for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
> + gpio = of_get_gpio(slot_np, idx);
> + if (!gpio_is_valid(gpio)) {
> + dev_err(host->dev, "invalid gpio: %d\n", gpio);
> + return -EINVAL;
> + }
> +
> + ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
> + if (ret) {
> + dev_err(host->dev, "gpio [%d] request failed\n",
> gpio);
> + return -EBUSY;
> + }
> + }
> +
> return 0;
> }
>
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/