Re: 3.8-rc2: pciehp waitqueue hang...

From: Jiang Liu
Date: Fri Jan 04 2013 - 11:56:55 EST


On 01/04/2013 09:08 AM, Daniel J Blueman wrote:
> On 3 January 2013 23:41, Jiang Liu <liuj97@xxxxxxxxx> wrote:
>> On 01/03/2013 11:11 PM, Daniel J Blueman wrote:
>>> When the Apple thunderbolt ethernet adapter comes loose on my Macbook
>>> Pro Retina (Intel DSL3510), we see pci_slot_name return
>>> non-deterministic data (ie varying each boot), and we see pciehp_wp
>>> remain armed with events causing the kthread to get stuck:
>>>
>>> tg3 0000:0a:00.0 eth0: Link is up at 1000 Mbps, full duplex
>>> tg3 0000:0a:00.0 eth0: Flow control is on for TX and on for RX
>>> <thunderbold adapter comes loose>
>>> pciehp 0000:06:03.0:pcie24: Card not present on Slot(3)
>>> tg3 0000:0a:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not
>>> clear MAC_TX_MODE=ffffffff
>>> tg3 0000:0a:00.0 eth0: No firmware running
>>> tg3 0000:0a:00.0 eth0: Link is down
>>> pcieport 0000:00:01.1: System wakeup enabled by ACPI
>>> pciehp 0000:09:00.0:pcie24: unloading service driver pciehp
>>> pciehp 0000:09:00.0:pcie24: Latch open on
>>> Slot(\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon)
>>> pciehp 0000:09:00.0:pcie24: Button pressed on
>>> Slot(\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon)
>>> pciehp 0000:09:00.0:pcie24: Card present on
>>> Slot(\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon)
>>> pciehp 0000:09:00.0:pcie24: Power fault on slot
>>> \xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon
>>> pciehp 0000:09:00.0:pcie24: Power fault bit 0 set
>>> pciehp 0000:09:00.0:pcie24: PCI slot
>>> #\xfffffff89\xffffffbbe\x02\xffffff88\xffffffff\xffffffff\xffffffe09\xffffffbbe\x02\xffffff88\xffffffff\xfffffffffbcon
>>> - powering on due to button press.
>>> pciehp 0000:09:00.0:pcie24: Link Training Error occurs
>>> pciehp 0000:09:00.0:pcie24: Failed to check link status
>>> INFO: task kworker/0:1:52 blocked for more than 120 seconds.
> [...]
>
>> Hi Daniel,
>> It seems like an issue caused by recursive PCIe HPC.
>> Could you please help to try the patch from:
>> http://www.spinics.net/lists/linux-pci/msg18625.html
>> Thanks!
>> Gerry
>
> (adding Yijing)
>
> Splendid; this fixes this failure nicely [1], finally releasing the bus.
>
> If nothing else, I feel this should be queud for 3.8-rc3.
>
> Many thanks,
> Daniel
>
> --- [1]
>
> <thunderbolt ethernet adapter disengagement>
> pciehp 0000:06:03.0:pcie24: Card not present on Slot(3)
> tg3 0000:0a:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not
> clear MAC_TX_MODE=ffffffff
> tg3 0000:0a:00.0 eth0: No firmware running
> tg3 0000:0a:00.0 eth0: Link is down
> [sched_delayed] sched: RT throttling activated
> pcieport 0000:00:01.1: System wakeup enabled by ACPI
> pciehp 0000:09:00.0:pcie24: unloading service driver pciehp
> pciehp 0000:09:00.0:pcie24: Latch open on
> Slot(\xffffffb0\x04Pd\x02\xffffff88\xffffffff\xffffffff\xffffff98\x04Pd\x02\xffffff88\xffffffff\xfffffffffbcon)
> pciehp 0000:09:00.0:pcie24: Button pressed on
> Slot(\xffffffb0\x04Pd\x02\xffffff88\xffffffff\xffffffff\xffffff98\x04Pd\x02\xffffff88\xffffffff\xfffffffffbcon)
> pciehp 0000:09:00.0:pcie24: Card present on
> Slot(\xffffffb0\x04Pd\x02\xffffff88\xffffffff\xffffffff\xffffff98\x04Pd\x02\xffffff88\xffffffff\xfffffffffbcon)
> pciehp 0000:09:00.0:pcie24: Power fault on slot
> \xffffffb0\x04Pd\x02\xffffff88\xffffffff\xffffffff\xffffff98\x04Pd\x02\xffffff88\xffffffff\xfffffffffbcon
Hi Daniel,
I have worked on a patch which may solve the random output above,
but need to rebase it to the latest kernel. Will send the patch to you once
rebased.
Thanks!
Gerry
> pciehp 0000:09:00.0:pcie24: Power fault bit 0 set
> pciehp 0000:09:00.0:pcie24: PCI slot
> #\xffffffb0\x04Pd\x02\xffffff88\xffffffff\xffffffff\xffffff98\x04Pd\x02\xffffff88\xffffffff\xfffffffffbcon
> - powering on due to button press.
> pciehp 0000:09:00.0:pcie24: Link Training Error occurs
> pciehp 0000:09:00.0:pcie24: Failed to check link status
> pci_bus 0000:0a: busn_res: [bus 0a] is released
> pci_bus 0000:09: busn_res: [bus 09-0a] is released
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/