Re: no config opt for k8temp in 3.6.11
From: Steven A. DuChene
Date: Fri Jan 04 2013 - 23:15:28 EST
When I do a grep for K8 in my .config file all I get is the following:
> grep -i k8 /usr/local/hugedisk/src/linux-3.6.11/.config
When I try your grep command I get:
> grep -E "^CONFIG_SENSORS" /usr/local/hugedisk/src/linux-3.6.11/.config|grep K
I will try doing a make mrproper and see if anything changes.
Thanks for the reply.
>From: Borislav Petkov <bp@xxxxxxxxx>
>Sent: Jan 4, 2013 3:35 PM
>To: "Steven A. DuChene" <linux-clusters@xxxxxxxxxxxxxx>
>Subject: Re: no config opt for k8temp in 3.6.11
>On Fri, Jan 04, 2013 at 09:25:14AM -0500, Steven A. DuChene wrote:
>> I have a few systems with AMD processors. One is a AMD Phenom II based
>> system which uses a k10temp kernel module to get the CPU temperature.
>> Another system has an Athlon64 processor which apparently is supposed
>> to use a k8temp module to do the same thing. I have built a 3.6.11
>> kernel for each system that otherwise runs OpenSuSE-11.X. On the
>> Phenom system the k10temp module is gets built and performs as
>> expected. However on the Atlnon system even though I see the k8temp.c
>> source file in the drivers/hwmon directory there does not seem to be
>> a way in the kernel config files available from the 3.6.11 kernel
>> sources to actually select that the k8temp module should be built. Is
>> this some oversight in the makeup of the kernel config files or am I
>> missing something obvious?
>That's strange, I can select all the AMD power drivers on 3.6.11:
>$ grep -E "^CONFIG_SENSORS" .config
>Can you do 'make mrproper' and try regenerating your config? But
>remember, mrproper will remove your .config so you might want to save
>that upfront in case you need it.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/