[PATCH 1/1] TPM: STMicroelectronics st33 driver SPI

[Mathias Leblanc]

From: admin01 <admin01@admin01-desktop.(none)>

 * STMicroelectronics version 1.2.0, Copyright (C) 2010
 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
 * This is free software, and you are welcome to redistribute it
 * under certain conditions.

This is the driver for TPM chip from ST Microelectronics.

If you have a TPM security chip from STMicroelectronics working with
an I2C/SPI, in menuconfig or .config choose the tpm driver on
device --> tpm and activate the protocol of your choice before compiling
the kernel.
The driver will be accessible from within Linux.

Tested on linux x86/x64 and beagleboard REV B & XM REV C

Signed-off-by: admin01 <admin01@admin01-desktop.(none)>
---
 drivers/char/tpm/Kconfig             |   10 +
 drivers/char/tpm/Makefile            |    1 +
 drivers/char/tpm/tpm_stm_st33_spi.c  | 1282 ++++++++++++++++++++++++++++++++++
 drivers/char/tpm/tpm_stm_st33_spi.h  |   79 +++
 include/linux/spi/tpm_stm_st33_spi.h |   46 ++
 5 files changed, 1418 insertions(+), 0 deletions(-)
 create mode 100644 drivers/char/tpm/tpm_stm_st33_spi.c
 create mode 100644 drivers/char/tpm/tpm_stm_st33_spi.h
 create mode 100644 include/linux/spi/tpm_stm_st33_spi.h

diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 915875e..63649f4 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -81,4 +81,14 @@ config TCG_IBMVTPM
 	  will be accessible from within Linux.  To compile this driver
 	  as a module, choose M here; the module will be called tpm_ibmvtpm.
 
+config TCG_ST33_SPI
+       tristate "STMicroelectronics ST33 SPI"
+       depends on SPI
+       depends on GPIOLIB
+       ---help---
+       If you have a TPM security chip from STMicroelectronics working with
+       an SPI bus say Yes and it will be accessible from within Linux.
+       To compile this driver as a module, choose M here; the module will be
+       called tpm_stm_st33_spi.
+
 endif # TCG_TPM
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index 5b3fc8b..44bf6e5 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
 obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
 obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
 obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o
++obj-$(CONFIG_TCG_ST33_SPI) += tpm_stm_st33_spi.o
diff --git a/drivers/char/tpm/tpm_stm_st33_spi.c b/drivers/char/tpm/tpm_stm_st33_spi.c
new file mode 100644
index 0000000..baa88b6
--- /dev/null
+++ b/drivers/char/tpm/tpm_stm_st33_spi.c
@@ -0,0 +1,1282 @@
+/*
+ * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009, 2010  STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@xxxxxx
+ *
+ * @File: tpm_stm_st33_spi.c
+ *
+ * @Synopsis:
+ *	09/15/2010:	First shot driver tpm_tis driver for lpc is
+ *			used as model.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+#include <linux/wait.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include <linux/spi/tpm_stm_st33_spi.h>
+
+#include "tpm.h"
+
+#include "tpm_stm_st33_spi.h"
+
+#ifdef DEBUG
+#define FUNC_ENTER()	pr_info("%s\n", __func__)
+#else
+#define	FUNC_ENTER()	do {}	while (0)
+#endif
+
+enum stm33zp24_access {
+	TPM_ACCESS_VALID = 0x80,
+	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+	TPM_ACCESS_REQUEST_PENDING = 0x04,
+	TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum stm33zp24_status {
+	TPM_STS_VALID = 0x80,
+	TPM_STS_COMMAND_READY = 0x40,
+	TPM_STS_GO = 0x20,
+	TPM_STS_DATA_AVAIL = 0x10,
+	TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum stm33zp24_int_flags {
+	TPM_GLOBAL_INT_ENABLE = 0x80,
+	TPM_INTF_CMD_READY_INT = 0x080,
+	TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
+	TPM_INTF_WAKE_UP_READY_INT = 0x020,
+	TPM_INTF_LOC4SOFTRELEASE_INT = 0x008,
+	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+	TPM_INTF_STS_VALID_INT = 0x002,
+	TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+	TIS_SHORT_TIMEOUT = 750,	/* ms */
+	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
+};
+
+/*
+ * write8_reg
+ * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: tpm, the chip description
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, The length of the data
+ * @return: number of byte written successfully: should be one if success.
+ */
+static int write8_reg(struct tpm_chip *tpm, u8 tpm_register,
+		      u8 *tpm_data, u16 tpm_size)
+{
+	/* u8 LOC+DIR u8 ADD u16 LENGHT u8* data */
+	/* u8 LATENCY u8 LATENCY */
+
+	u8 data;
+	int i = 0, j;
+	int value = 0;
+	struct spi_device *dev = (struct spi_device *) tpm->vendor.iobase;
+	struct st33zp24_platform_data *platform_data = dev->dev.platform_data;
+	u8 *data_buffer = platform_data->tpm_spi_buffer[0];
+	struct spi_transfer xfer = {
+		.tx_buf	 = data_buffer,
+		.rx_buf	 = platform_data->tpm_spi_buffer[1],
+	};
+	struct spi_message msg;
+	u8 latency = platform_data->latency + tpm_size + 1;
+
+
+	FUNC_ENTER();
+	/* Pre-Header */
+
+	data = TPM_WRITE_DIRECTION | tpm->vendor.locality;
+	memcpy(data_buffer + i, &data, sizeof(data));
+	i++;
+	data = tpm_register;
+	memcpy(data_buffer + i, &data, sizeof(data));
+	i++;
+
+	if (tpm_size > 0 &&
+	     (tpm_register == TPM_DATA_FIFO ||
+	      tpm_register == TPM_HASH_DATA)) {
+		data = tpm_size >> 8 & 0x00ff;
+		memcpy(data_buffer + i, &data, sizeof(data));
+		i++;
+		data = tpm_size & 0x00ff;
+		memcpy(data_buffer + i, &data, sizeof(data));
+		i++;
+		latency -= 2;
+	}
+
+	memcpy(data_buffer + i, tpm_data, tpm_size);
+	i += tpm_size;
+
+	for (j = 0 ; j < platform_data->latency + 1; j++) {
+		data = TPM_DUMMY_BYTE;
+		memcpy(data_buffer + i, &data, sizeof(data));
+		i++;
+	}
+	xfer.len = i;
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+	value = spi_sync(dev, &msg);
+
+	if (value == 0) {
+		j = i - 1 - j;
+		for (; j < i && ((u8 *) xfer.rx_buf)[j] == 0; j++)
+			;
+
+		if (((u8 *) xfer.rx_buf)[j] != 0)
+			value = ((u8 *) xfer.rx_buf)[j];
+	}
+
+	return value;
+} /* write8_reg() */
+
+/*
+ * read8_reg
+ * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: tpm, the chip description
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+static u8 read8_reg(struct tpm_chip *tpm, u8 tpm_register,
+		    u8 *tpm_data, u16 tpm_size)
+{
+	u8 data;
+	int i = 0, j;
+	int value = 0;
+	struct spi_device *dev = (struct spi_device *) tpm->vendor.iobase;
+	struct st33zp24_platform_data *platform_data = dev->dev.platform_data;
+	u8 *data_buffer = platform_data->tpm_spi_buffer[0];
+	struct spi_transfer xfer = {
+		.tx_buf	 = data_buffer,
+		.rx_buf	 = platform_data->tpm_spi_buffer[1],
+	};
+	struct spi_message msg;
+
+	u8 latency = platform_data->latency + tpm_size + 1;
+
+	FUNC_ENTER();
+	/* Pre-Header */
+
+	data = tpm->vendor.locality;
+	memcpy(data_buffer + i, &data, sizeof(data));
+	i++;
+	data = tpm_register;
+	memcpy(data_buffer + i, &data, sizeof(data));
+	i++;
+
+	for (j = 0 ; j < latency; j++) {
+		data = TPM_DUMMY_BYTE;
+		memcpy(data_buffer + i, &data, sizeof(data));
+		i++;
+	}
+	xfer.len = i;
+
+	/* header + status byte + size of the data + status byte */
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+	value = spi_sync(dev, &msg);
+	if (tpm_size > 0 && value == 0) {
+		j = 2;
+		for (; j < i && ((u8 *) xfer.rx_buf)[j] == 0; j++)
+			;
+
+		if (j + 1 < i) {
+			value = ((u8 *) xfer.rx_buf)[j];
+
+			if (tpm_size > 0)
+				memcpy(tpm_data, xfer.rx_buf + j + 1,
+								 tpm_size);
+		}
+	}
+	return value;
+} /* read8_reg() */
+
+/*
+ * SPI_WRITE_DATA
+ * Send byte to the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: tpm, the chip description
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, The length of the data
+ * @return: number of byte written successfully: should be one if success.
+ */
+static u32 SPI_WRITE_DATA(struct tpm_chip *tpm, u8 tpm_register,
+			  u8 *tpm_data, u16 tpm_size)
+{
+	u8 value = 0;
+
+	FUNC_ENTER();
+
+	value = write8_reg(tpm, tpm_register, tpm_data, tpm_size);
+
+	switch (value) {
+	case TPM_ST_SPI_OK:
+		return TPM_ST_SPI_OK;
+	case 0:
+		return 0;
+	default:
+		return -EBUSY;
+	}
+} /* SPI_WRITE_DATA() */
+
+/*
+ * SPI_READ_DATA
+ * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
+ * @param: tpm, the chip description
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+static u32 SPI_READ_DATA(struct tpm_chip *tpm, u8 tpm_register,
+			u8 *tpm_data, u16 tpm_size)
+{
+	u8 value = 0;
+
+	FUNC_ENTER();
+
+	value = read8_reg(tpm, tpm_register, tpm_data, tpm_size);
+
+	switch (value) {
+	case TPM_ST_SPI_OK:
+		return TPM_ST_SPI_OK;
+	case 0:
+		return 0;
+	default:
+		return -EBUSY;
+	}
+} /* SPI_READ_DATA () */
+
+/*
+ * clear_interruption
+ * clear the TPM interrupt register.
+ * @param: tpm, the chip description
+ */
+static void clear_interruption(struct tpm_chip *tpm)
+{
+	u8 interrupt;
+	SPI_READ_DATA(tpm, TPM_INT_STATUS, &interrupt, 1);
+	/* Clear interrupts handled with TPM_EOI */
+	SPI_WRITE_DATA(tpm, TPM_INT_STATUS, &interrupt, 1);
+	SPI_READ_DATA(tpm, TPM_INT_STATUS, &interrupt, 1);
+} /* clear_interruption() */
+
+/*
+ * _wait_for_interrupt_serirq_timeout
+ * @param: tpm, the chip description
+ * @param: timeout, the timeout of the interrupt
+ * @return: the status of the interruption.
+ */
+static int _wait_for_interrupt_serirq_timeout(struct tpm_chip *chip,
+					unsigned long timeout)
+{
+	unsigned long status;
+	struct spi_device *client;
+	struct st33zp24_platform_data *pin_infos;
+
+	FUNC_ENTER();
+
+	client = (struct spi_device *) chip->vendor.iobase;
+	pin_infos = client->dev.platform_data;
+
+	status = wait_for_completion_interruptible_timeout(
+				&pin_infos->irq_detection, timeout);
+	if (status > 0)
+		enable_irq(gpio_to_irq(pin_infos->io_serirq));
+	gpio_direction_input(pin_infos->io_serirq);
+
+	return status;
+} /* wait_for_interrupt_serirq_timeout() */
+
+unsigned long wait_for_serirq_timeout(struct tpm_chip *chip, bool condition,
+				 unsigned long timeout)
+{
+	unsigned long status = 0;
+	struct spi_device *client;
+	struct st33zp24_platform_data *pin_infos;
+
+	client = (struct spi_device *) chip->vendor.iobase;
+	pin_infos = client->dev.platform_data;
+
+	status = _wait_for_interrupt_serirq_timeout(chip, timeout);
+	if (!status) {
+		status = -EBUSY;
+		goto wait_end;
+	}
+	clear_interruption(chip);
+	if (condition)
+		status = 1;
+
+wait_end:
+	status;
+}
+
+
+/*
+ * tpm_stm_spi_cancel, cancel is not implemented.
+ * @param: chip, the tpm chip description as specified in
+ * driver/char/tpm/tpm.h.
+ */
+static void tpm_stm_spi_cancel(struct tpm_chip *chip)
+{
+	struct spi_device *client;
+	u8 data = TPM_STS_COMMAND_READY;
+	client = (struct spi_device *) chip->vendor.iobase;
+
+	FUNC_ENTER();
+
+	/* this causes the current command to be aborted */
+	SPI_WRITE_DATA(chip, TPM_STS, &data, 1);
+} /* tpm_stm_spi_cancel() */
+
+/*
+ * tpm_stm_spi_status return the TPM_STS register
+ * @param: chip, the tpm chip description
+ * @return: the TPM_STS register value.
+ */
+static u8 tpm_stm_spi_status(struct tpm_chip *chip)
+{
+	struct spi_device *client;
+	u8 data;
+	client = (struct spi_device *) chip->vendor.iobase;
+
+	FUNC_ENTER();
+
+	SPI_READ_DATA(chip, TPM_STS, &data, 1);
+	return data;
+} /* tpm_stm_spi_status() */
+
+/*
+ * responseSize return the command size
+ * @param: buffer, command buffer.
+ * @param: size, the buffer size.
+ * @return: the command size.
+ */
+static int responseSize(const char *buffer, size_t size)
+{
+	size_t val = 0;
+
+	FUNC_ENTER();
+
+	if (size >= TPM_HEADER_SIZE) {
+		val = (size_t) (((unsigned)buffer[2]) << 24
+				| ((unsigned)buffer[3]) << 16
+				| ((unsigned)buffer[4]) << 8 | (unsigned)
+				buffer[5]);
+	}
+
+	if (val < TPM_BUFSIZE)
+		return val;
+	else
+		return TPM_BUFSIZE;
+}
+
+/*
+ * check_locality if the locality is active
+ * @param: chip, the tpm chip description
+ * @return: the active locality or -EACCESS.
+ */
+static int check_locality(struct tpm_chip *chip)
+{
+	struct spi_device *client;
+	u8 data;
+	u8 status;
+
+	FUNC_ENTER();
+
+	client = (struct spi_device *) chip->vendor.iobase;
+
+	status = SPI_READ_DATA(chip, TPM_ACCESS, &data, 1);
+	if (status && (data &
+		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+		(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
+		return chip->vendor.locality;
+
+	return -EACCES;
+} /* check_locality() */
+
+/*
+ * request_locality request the TPM locality
+ * @param: chip, the chip description
+ * @return: the active locality or EACCESS.
+ */
+static int request_locality(struct tpm_chip *chip)
+{
+	unsigned long stop;
+	long rc;
+	u8 data;
+	struct spi_device *client;
+
+	FUNC_ENTER();
+
+	client = (struct spi_device *) chip->vendor.iobase;
+	/* Check locality */
+	if (check_locality(chip) == chip->vendor.locality)
+		return chip->vendor.locality;
+
+	/* Request locality */
+	data = TPM_ACCESS_REQUEST_USE;
+	rc = SPI_WRITE_DATA(chip, TPM_ACCESS, &data, 1);
+	if (rc < 0)
+		goto end;
+
+	/* wait for burstcount */
+	if (chip->vendor.irq) {
+		rc = wait_for_serirq_timeout(chip, (check_locality
+						(chip) >= 0),
+						chip->vendor.timeout_a);
+		if (rc > 0)
+			return chip->vendor.locality;
+	} else {
+		stop = jiffies + chip->vendor.timeout_a;
+		do {
+			if (check_locality(chip) >= 0)
+				return chip->vendor.locality;
+			msleep(TPM_TIMEOUT);
+		} while (time_before(jiffies, stop));
+	}
+end:
+	return -EACCES;
+} /* request_locality() */
+
+/*
+ * release_locality release the active locality
+ * @param: chip, the tpm chip description.
+ */
+static void release_locality(struct tpm_chip *chip)
+{
+	struct spi_device *client;
+	u8 data;
+
+	FUNC_ENTER();
+
+	client = (struct spi_device *) chip->vendor.iobase;
+	data = TPM_ACCESS_ACTIVE_LOCALITY;
+	SPI_WRITE_DATA(chip, TPM_ACCESS, &data, 1);
+} /* release_locality()*/
+
+/*
+ * get_burstcount return the burstcount address 0x19 0x1A
+ * @param: chip, the chip description
+ * return: the burstcount.
+ */
+static int get_burstcount(struct tpm_chip *chip)
+{
+	unsigned long stop;
+	u32 burstcnt, status;
+	u8 tpm_reg, temp;
+
+	FUNC_ENTER();
+
+	/* wait for burstcount */
+	/* which timeout value, spec has 2 answers (c & d) */
+	stop = jiffies + chip->vendor.timeout_d;
+	do {
+		tpm_reg = TPM_STS + 1;
+		status = SPI_READ_DATA(chip, tpm_reg, &temp, 1);
+		if (status < 0)
+			goto end;
+
+		tpm_reg = tpm_reg + 1;
+		burstcnt = temp;
+		status = SPI_READ_DATA(chip, tpm_reg, &temp, 1);
+		if (status < 0)
+			goto end;
+
+		burstcnt |= temp << 8;
+		if (burstcnt)
+			return burstcnt;
+		msleep(TPM_TIMEOUT);
+	} while (time_before(jiffies, stop));
+
+end:
+	return -EBUSY;
+} /* get_burstcount() */
+
+/*
+ * wait_for_stat wait for a TPM_STS value
+ * @param: chip, the tpm chip description
+ * @param: mask, the value mask to wait
+ * @param: timeout, the timeout
+ * @param: queue, the wait queue.
+ * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
+ */
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+			 wait_queue_head_t *queue)
+{
+	unsigned long stop;
+	long rc;
+	u8 status;
+
+	FUNC_ENTER();
+
+	/* check current status */
+	status = tpm_stm_spi_status(chip);
+	if (!chip->vendor.irq && (status & mask) == mask)
+		return 0;
+
+	if (chip->vendor.irq) {
+		rc = wait_for_serirq_timeout(chip, ((tpm_stm_spi_status
+						    (chip) & mask) ==
+						     mask), timeout);
+		if (rc > 0)
+			return 0;
+	} else {
+		stop = jiffies + timeout;
+		do {
+			msleep(TPM_TIMEOUT);
+			status = tpm_stm_spi_status(chip);
+			if ((status & mask) == mask)
+				return 0;
+		} while (time_before(jiffies, stop));
+	}
+	return -ETIME;
+} /* wait_for_stat() */
+
+/*
+ * recv_data receive data
+ * @param: chip, the tpm chip description
+ * @param: buf, the buffer where the data are received
+ * @param: count, the number of data to receive
+ * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
+ */
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	u32 size = 0, burstcnt, status, len;
+	struct spi_device *client;
+
+	FUNC_ENTER();
+
+	client = (struct spi_device *) chip->vendor.iobase;
+
+	while (size < count &&
+	       wait_for_stat(chip,
+			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+			     chip->vendor.timeout_c,
+			     &chip->vendor.read_queue)
+						== 0) {
+		burstcnt = get_burstcount(chip);
+		len = min_t(int, burstcnt, count - size);
+		status = SPI_READ_DATA(chip, TPM_DATA_FIFO, buf + size, len);
+		if (status < 0)
+			return status;
+
+
+		size += len;
+	}
+	return size;
+}
+
+/*
+ * tpm_ioserirq_handler the serirq irq handler
+ * @param: irq, the tpm chip description
+ * @param: dev_id, the description of the chip
+ * @return: the status of the handler.
+ */
+static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
+{
+	struct tpm_chip *chip = dev_id;
+	struct spi_device *client;
+	struct st33zp24_platform_data *pin_infos;
+
+	disable_irq_nosync(irq);
+	FUNC_ENTER();
+
+	client = (struct spi_device *) chip->vendor.iobase;
+	pin_infos = client->dev.platform_data;
+
+	complete(&pin_infos->irq_detection);
+	return IRQ_HANDLED;
+} /* tpm_ioserirq_handler() */
+
+/*
+ * tpm_stm_spi_send send TPM commands through the SPI bus.
+ * @param: chip, the tpm chip description
+ * @param: buf, the tpm command buffer
+ * @param: len, the tpm command size
+ * @return: In case of success the number of bytes sent.
+ *			In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_spi_send(struct tpm_chip *chip, unsigned char *buf,
+			    size_t len)
+{
+	u32 ret = 0, ordinal,
+	    status, burstcnt = 0, i, size = 0;
+	u8 data;
+
+	struct spi_device *client;
+	struct st33zp24_platform_data *pin_infos;
+
+	FUNC_ENTER();
+
+	if (chip == NULL)
+		return -EBUSY;
+	if (len < TPM_HEADER_SIZE)
+		return -EBUSY;
+
+	client = (struct spi_device *)chip->vendor.iobase;
+	pin_infos = client->dev.platform_data;
+
+	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+	ret = request_locality(chip);
+	if (ret < 0)
+		return ret;
+
+	status = tpm_stm_spi_status(chip);
+	if ((status & TPM_STS_COMMAND_READY) == 0) {
+		tpm_stm_spi_cancel(chip);
+		if (wait_for_stat
+		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
+		     &chip->vendor.int_queue) < 0) {
+			ret = -ETIME;
+			goto out_err;
+		}
+	}
+
+	for (i = 0 ; i < len - 1 ;) {
+		burstcnt = get_burstcount(chip);
+		size = min_t(int, len - i - 1, burstcnt);
+		ret = SPI_WRITE_DATA(chip, TPM_DATA_FIFO, buf, size);
+		if (ret < 0)
+			goto out_err;
+		i += size;
+	}
+
+	status = tpm_stm_spi_status(chip);
+	if ((status & TPM_STS_DATA_EXPECT) == 0) {
+		ret = -EIO;
+		goto out_err;
+	}
+
+	/* write last byte */
+	SPI_WRITE_DATA(chip, TPM_DATA_FIFO, buf + len - 1, 1);
+
+	status = tpm_stm_spi_status(chip);
+	if ((status & TPM_STS_DATA_EXPECT) != 0) {
+		ret = -EIO;
+		goto out_err;
+	}
+
+	/* go and do it */
+	data = TPM_STS_GO;
+	ret = SPI_WRITE_DATA(chip, TPM_STS, &data, 1);
+	if (ret < 0)
+		goto out_err;
+
+	return len;
+out_err:
+	tpm_stm_spi_cancel(chip);
+	release_locality(chip);
+	return ret;
+}
+
+/*
+ * tpm_stm_spi_recv received TPM response through the SPI bus.
+ * @param: chip, the tpm chip description
+ * @param: buf, the tpm command buffer
+ * @param: len, the tpm command size
+* @return: In case of success the number of bytes received.
+ *			In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_spi_recv(struct tpm_chip *chip, unsigned char *buf,
+			    size_t count)
+{
+	int size = 0;
+	int expected;
+
+	struct spi_device *client;
+	struct st33zp24_platform_data *pin_infos;
+
+
+	FUNC_ENTER();
+
+	client = (struct spi_device *)chip->vendor.iobase;
+	pin_infos = client->dev.platform_data;
+
+
+	if (chip == NULL)
+		return -EBUSY;
+	if (count < TPM_HEADER_SIZE) {
+		size = -EIO;
+		goto out;
+	}
+
+	size = recv_data(chip, buf, TPM_HEADER_SIZE);
+
+	/* read first 10 bytes, including tag, paramsize, and result */
+	if (size < TPM_HEADER_SIZE) {
+		dev_err(chip->dev, "Unable to read header\n");
+		goto out;
+	}
+
+	expected = be32_to_cpu(*(__be32 *) (buf + 2));
+	if (expected > count) {
+		size = -EIO;
+		goto out;
+	}
+
+	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+					expected - TPM_HEADER_SIZE);
+	if (size < expected) {
+		dev_err(chip->dev, "Unable to read remainder of result\n");
+		size = -ETIME;
+		goto out;
+	}
+
+out:
+	chip->vendor.cancel(chip);
+	release_locality(chip);
+	return size;
+}
+
+/*
+ * tpm_stm_spi_send send TPM locality 4 hash through the SPI bus.
+ * @param: chip, the tpm chip description
+ * @param: buf, the tpm data buffer
+ * @param: len, the tpm data size
+ * @return: In case of success the number of bytes sent.
+ *			In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_spi_send_hash(struct tpm_chip *chip, unsigned char *buf,
+			    size_t len)
+{
+	u32 ret = 0, burstcnt, i, size;
+	u8 data;
+
+	struct spi_device *client;
+	struct st33zp24_platform_data *pin_infos;
+
+	FUNC_ENTER();
+
+	if (chip == NULL)
+		return -EBUSY;
+
+	client = (struct spi_device *)chip->vendor.iobase;
+	pin_infos = client->dev.platform_data;
+
+	ret = request_locality(chip);
+	if (ret < 0)
+		goto end;
+
+	data = TPM_DUMMY_BYTE;
+	/* HASH_START */
+	ret = SPI_WRITE_DATA(chip, TPM_HASH_START, &data, 1);
+	if (ret < 0)
+		goto end;
+
+	/* Send data  */
+	for (i = 0 ; i < len ;) {
+		burstcnt = get_burstcount(chip);
+		if (burstcnt < 0)
+			goto end;
+		size = min_t(int, len - i, burstcnt);
+		ret = SPI_WRITE_DATA(chip, TPM_DATA_FIFO, buf + i, size);
+		if (ret < 0)
+			goto end;
+		i += size;
+	}
+
+end:
+	/* HASH_END   */
+	ret = SPI_WRITE_DATA(chip, TPM_HASH_END, &data, 1);
+	return ret;
+}
+
+
+/*
+ * tpm_st33_spi_ioctl provides 2 handles:
+ * - TPMIOC_CANCEL: allow to CANCEL a TPM commands execution.
+ *   See tpm_stm_spi_cancel description above
+ * - TPMIOC_TRANSMIT: allow to transmit a TPM commands.
+ * - TPMIOC_HASH: allow to compute a locality 4 hash
+ * - TPMIOC_CHANGELOCALITY: allow to change the current locality
+ *
+ * @return: In case of success, return TPM response size.
+ * In other case return < 0 value describing the issue.
+ */
+static ssize_t tpm_st33_spi_ioctl(struct inode *inode, struct file *file,
+				  unsigned int cmd, unsigned long arg)
+{
+	int in_size = 0, out_size = 0, rc;
+	int status;
+	unsigned long stop = 0;
+	struct tpm_chip *chip = file->private_data;
+	st_tpm_hash_t hash_data;
+
+	FUNC_ENTER();
+
+	switch (cmd) {
+	case TPMIOC_CANCEL:
+		tpm_stm_spi_cancel(chip);
+		return 0;
+	case TPMIOC_TRANSMIT:
+		if (copy_from_user(chip->data_buffer,
+		    (const char *)arg, TPM_HEADER_SIZE))
+			return -EFAULT;
+		in_size = responseSize(chip->data_buffer,
+				      TPM_HEADER_SIZE);
+		if (copy_from_user(chip->data_buffer,
+				   (const char *)arg, in_size))
+			return -EFAULT;
+		tpm_stm_spi_send(chip, chip->data_buffer, in_size);
+
+		out_size = tpm_stm_spi_recv(chip, chip->data_buffer,
+					    TPM_BUFSIZE);
+
+		if (copy_to_user((char *)arg, chip->data_buffer,
+				 out_size))
+			return -EFAULT;
+
+		return out_size;
+	case TPMIOC_HASH:
+		if (chip->vendor.locality == LOCALITY4) {
+			if (copy_from_user(&hash_data,
+					 (st_tpm_hash_t __user *)arg,
+						sizeof(st_tpm_hash_t)))
+				return -EFAULT;
+			tpm_stm_spi_send_hash(chip, hash_data.data,
+							 hash_data.size);
+
+			if (chip->vendor.irq) {
+				rc = wait_event_interruptible_timeout(
+						chip->vendor.read_queue,
+			(check_locality(chip) != chip->vendor.locality),
+						 chip->vendor.timeout_a);
+				if (rc < 0)
+					return -ETIME;
+				return hash_data.size;
+			}
+
+			stop = jiffies + chip->vendor.timeout_a;
+			do {
+				msleep(TPM_TIMEOUT);
+				status = check_locality(chip);
+				if (status != chip->vendor.locality)
+					return hash_data.size;
+			} while (time_before(jiffies, stop));
+
+			return -ETIME;
+		}
+		return -ENOSYS;
+		break;
+	case TPMIOC_CHANGELOCALITY:
+		if (arg >= LOCALITY0 && arg <= LOCALITY4) {
+			chip->vendor.locality = arg;
+			return 0;
+		}
+		return -ENOSYS;
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return -ENOTTY;
+}
+
+static const struct file_operations tpm_st33_spi_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.read = tpm_read,
+	.unlocked_ioctl = tpm_st33_spi_ioctl,
+	.write = tpm_write,
+	.open = tpm_open,
+	.release = tpm_release,
+};
+
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
+static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
+static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
+static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute *stm_tpm_attrs[] = {
+	&dev_attr_pubek.attr,
+	&dev_attr_pcrs.attr,
+	&dev_attr_enabled.attr,
+	&dev_attr_active.attr,
+	&dev_attr_owned.attr,
+	&dev_attr_temp_deactivated.attr,
+	&dev_attr_caps.attr,
+	&dev_attr_cancel.attr, NULL,
+};
+
+static struct attribute_group stm_tpm_attr_grp = {
+	.attrs = stm_tpm_attrs
+};
+
+static struct tpm_vendor_specific st_spi_tpm = {
+	.send = tpm_stm_spi_send,
+	.recv = tpm_stm_spi_recv,
+	.cancel = tpm_stm_spi_cancel,
+	.status = tpm_stm_spi_status,
+	.attr_group = &stm_tpm_attr_grp,
+	.miscdev = {.fops = &tpm_st33_spi_fops,},
+};
+
+static int evaluate_latency(struct tpm_chip *chip)
+{
+	int latency = 0;
+	struct spi_device *dev = (struct spi_device *) chip->vendor.iobase;
+	struct st33zp24_platform_data *platform_data = dev->dev.platform_data;
+	int status = 0;
+	u8 data;
+
+	for (; status == 0x00 && latency < MAX_SPI_LATENCY ; latency++) {
+		platform_data->latency = latency;
+		status = SPI_READ_DATA(chip, TPM_INTF_CAPABILITY, &data, 1);
+	}
+	return latency - 1;
+} /* evaluate_latency() */
+
+static int interrupts;
+module_param(interrupts, bool, 0444);
+MODULE_PARM_DESC(interrupts, "Enable interrupts");
+
+static int power_mgt = 1;
+module_param(power_mgt, bool, 0444);
+MODULE_PARM_DESC(power_mgt, "Power Management");
+
+/*
+ * tpm_st33_spi_probe initialize the TPM device
+ * @param: client, the spi_device drescription (TPM SPI description).
+ * @param: id, the spi_device_id struct.
+ * @return: 0 in case of success.
+ *	 -1 in other case.
+ */
+static int
+tpm_st33_spi_probe(struct spi_device *dev)
+{
+	u32 err;
+	u8 intmask;
+	struct tpm_chip *chip;
+	struct st33zp24_platform_data *platform_data;
+
+	FUNC_ENTER();
+
+	err = 0;
+
+	/* Check SPI platform functionnalities */
+	if (dev == NULL) {
+		pr_info("dev is NULL. exiting.\n");
+		err = -ENODEV;
+		goto end;
+	}
+
+	chip = tpm_register_hardware(&dev->dev, &st_spi_tpm);
+	if (!chip) {
+		err = -ENODEV;
+		goto end;
+	}
+
+	/* Allocation of SPI buffers MISO and MOSI		*/
+	/* Size is as follow:					*/
+	/* Request burstcount value  = 0x800 = 2048		*/
+	/* +							*/
+	/* Response burstcount value = 0x400 = 1024		*/
+	/* +							*/
+	/* At least:						*/
+	/* 1 byte for direction/locality			*/
+	/* 1 byte tpm tis register				*/
+	/* 2 bytes spi data length (for request only)		*/
+	/* 2 latency bytes					*/
+	/* 1 status byte					*/
+	/* = 2048 + 1024 + 7					*/
+	/* We reserved 2048 + 1024 + 20 in case latency byte	*/
+	/* change						*/
+	platform_data = dev->dev.platform_data;
+	platform_data->tpm_spi_buffer[0] =
+	    kmalloc((TPM_BUFSIZE + (TPM_BUFSIZE / 2) +
+				 TPM_DIGEST_SIZE) * sizeof(u8), GFP_KERNEL);
+	if (platform_data->tpm_spi_buffer[0] == NULL) {
+		err = -ENOMEM;
+		goto _tpm_clean_answer;
+	}
+	platform_data->tpm_spi_buffer[1] =
+	    kmalloc((TPM_BUFSIZE + (TPM_BUFSIZE / 2) +
+				 TPM_DIGEST_SIZE) * sizeof(u8) , GFP_KERNEL);
+	if (platform_data->tpm_spi_buffer[1] == NULL) {
+		err = -ENOMEM;
+		goto _tpm_clean_response;
+	}
+
+	chip->vendor.iobase = dev;
+
+	/* Default timeouts */
+	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.locality = LOCALITY0;
+
+	if (power_mgt) {
+		err = gpio_request(platform_data->io_lpcpd, "TPM IO_LPCPD");
+		if (err)
+			goto _gpio_init1;
+		gpio_set_value(platform_data->io_lpcpd, 1);
+	}
+
+	platform_data->latency = evaluate_latency(chip);
+	if (platform_data->latency <= 0x00) {
+		err = -ENODEV;
+		goto _gpio_init1;
+	}
+
+	/* Enable interrupt */
+	/* Register GPIO pin through generic Linux GPIO API */
+	if (interrupts) {
+		init_completion(&platform_data->irq_detection);
+		if (request_locality(chip) != LOCALITY0) {
+			err = -ENODEV;
+			goto _tpm_clean_response;
+		}
+		err = gpio_request(platform_data->io_serirq, "TPM IO_SERIRQ");
+		if (err)
+			goto _gpio_init2;
+
+		/* Clear all existing */
+		clear_interruption(chip);
+		err = request_irq(gpio_to_irq(platform_data->io_serirq),
+							&tpm_ioserirq_handler,
+				IRQF_TRIGGER_HIGH | IRQF_SHARED,
+				"TPM SERIRQ management", chip);
+		if (err < 0) {
+
+			pr_info("TPM SERIRQ signals %d not available\n",
+			gpio_to_irq(platform_data->io_serirq));
+			goto _irq_set;
+		}
+		err = SPI_READ_DATA(chip, TPM_INT_ENABLE, &intmask, 1);
+		if (err < 0)
+			goto _irq_set;
+
+		intmask |= TPM_INTF_CMD_READY_INT
+			|  TPM_INTF_FIFO_AVALAIBLE_INT
+			|  TPM_INTF_WAKE_UP_READY_INT
+			|  TPM_INTF_LOC4SOFTRELEASE_INT
+			|  TPM_INTF_LOCALITY_CHANGE_INT
+			|  TPM_INTF_STS_VALID_INT
+			|  TPM_INTF_DATA_AVAIL_INT;
+
+		err = SPI_WRITE_DATA(chip, TPM_INT_ENABLE, &intmask, 1);
+		if (err < 0)
+			goto _irq_set;
+
+		intmask = TPM_GLOBAL_INT_ENABLE;
+		err = SPI_WRITE_DATA(chip, TPM_INT_ENABLE + 3, &intmask, 1);
+		if (err < 0)
+			goto _irq_set;
+
+		err = SPI_READ_DATA(chip, TPM_INT_STATUS, &intmask, 1);
+		if (err < 0)
+			goto _irq_set;
+
+		chip->vendor.irq = interrupts;
+
+		tpm_gen_interrupt(chip);
+	}
+
+	tpm_get_timeouts(chip);
+
+	/* attach chip datas to client */
+	spi_set_drvdata(dev, chip);
+	platform_data->bChipF = false;
+
+	pr_info("TPM SPI Initialized\n");
+	return 0;
+_irq_set:
+	free_irq(gpio_to_irq(platform_data->io_serirq), chip);
+_gpio_init2:
+	if (platform_data && interrupts)
+		gpio_free(platform_data->io_serirq);
+_gpio_init1:
+	if (platform_data && power_mgt)
+		gpio_free(platform_data->io_lpcpd);
+_tpm_clean_response:
+	tpm_remove_hardware(chip->dev);
+	if (platform_data->tpm_spi_buffer[1] != NULL) {
+		kfree(platform_data->tpm_spi_buffer[1]);
+		platform_data->tpm_spi_buffer[1] = NULL;
+	}
+_tpm_clean_answer:
+	if (platform_data->tpm_spi_buffer[0] != NULL) {
+		kfree(platform_data->tpm_spi_buffer[0]);
+		platform_data->tpm_spi_buffer[0] = NULL;
+	}
+
+	platform_data->bChipF = true;
+end:
+	pr_info("TPM SPI initialisation fail\n");
+	return err;
+}
+
+/*
+ * tpm_st33_spi_remove remove the TPM device
+ * @param: client, the spi_device drescription (TPM SPI description).
+		clear_bit(0, &chip->is_open);
+ * @return: 0 in case of success.
+ */
+static __devexit int tpm_st33_spi_remove(struct spi_device *client)
+{
+	struct tpm_chip *chip = (struct tpm_chip *)spi_get_drvdata(client);
+	struct st33zp24_platform_data *pin_infos =
+		((struct spi_device *) chip->vendor.iobase)->dev.platform_data;
+
+	FUNC_ENTER();
+
+	if (pin_infos != NULL) {
+		gpio_free(pin_infos->io_lpcpd);
+
+		/* Check if chip has been previously clean */
+		if (pin_infos->bChipF != true)
+			tpm_remove_hardware(chip->dev);
+		if (pin_infos->tpm_spi_buffer[1] != NULL) {
+			kfree(pin_infos->tpm_spi_buffer[1]);
+			pin_infos->tpm_spi_buffer[1] = NULL;
+		}
+		if (pin_infos->tpm_spi_buffer[0] != NULL) {
+			kfree(pin_infos->tpm_spi_buffer[0]);
+			pin_infos->tpm_spi_buffer[0] = NULL;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * tpm_st33_spi_pm_suspend suspend the TPM device
+ * Added: Work around when suspend and no tpm application is running, suspend
+ * may fail because chip->data_buffer is not set (only set in tpm_open in Linux
+ * TPM core)
+ * @param: client, the spi_device drescription (TPM SPI description).
+ * @param: mesg, the power management message.
+ * @return: 0 in case of success.
+ */
+static int tpm_st33_spi_pm_suspend(struct spi_device *client,
+							 pm_message_t mesg)
+{
+	struct tpm_chip *chip =
+	    (struct tpm_chip *)spi_get_drvdata(client);
+	struct st33zp24_platform_data *pin_infos =
+		((struct spi_device *)chip->vendor.iobase)->dev.platform_data;
+	int ret = 0;
+
+	if (power_mgt)
+		gpio_set_value(pin_infos->io_lpcpd, 0);
+	else {
+		if (chip->data_buffer == NULL)
+			chip->data_buffer = pin_infos->tpm_spi_buffer[0];
+		ret = tpm_pm_suspend(&client->dev, mesg);
+	}
+	return ret;
+}				/* tpm_st33_spi_suspend() */
+
+/*
+ * tpm_st33_spi_pm_resume resume the TPM device
+ * @param: spi, the spi_device drescription (TPM SPI description).
+ * @return: 0 in case of success.
+ */
+static int tpm_st33_spi_pm_resume(struct spi_device *spi)
+{
+	struct tpm_chip *chip =
+	    (struct tpm_chip *)spi_get_drvdata(spi);
+	struct st33zp24_platform_data *pin_infos =
+		((struct spi_device *)chip->vendor.iobase)->dev.platform_data;
+
+	int ret = 0;
+	if (power_mgt) {
+		gpio_set_value(pin_infos->io_lpcpd, 1);
+		ret = wait_for_serirq_timeout(chip,
+					 (chip->vendor.status(chip) &&
+					  TPM_STS_VALID) == TPM_STS_VALID,
+					  chip->vendor.timeout_b);
+	} else {
+		if (chip->data_buffer == NULL)
+			chip->data_buffer = pin_infos->tpm_spi_buffer[0];
+		ret = tpm_pm_resume(&spi->dev);
+		if (!ret)
+			tpm_continue_selftest(chip);
+	}
+	return ret;
+}				/* tpm_st33_spi_pm_resume() */
+
+static struct spi_driver tpm_st33_spi_driver = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = TPM_ST33_SPI,
+		   },
+	.probe = tpm_st33_spi_probe,
+	.remove = tpm_st33_spi_remove,
+	.resume = tpm_st33_spi_pm_resume,
+	.suspend = tpm_st33_spi_pm_suspend,
+};
+
+/*
+ * tpm_st33_spi_init initialize driver
+ * @return: 0 if successful, else non zero value.
+ */
+static int __init tpm_st33_spi_init(void)
+{
+	FUNC_ENTER();
+	return spi_register_driver(&tpm_st33_spi_driver);
+}
+
+/*
+ * tpm_st33_spi_exit The kernel calls this function during unloading the
+ * module or during shut down process
+ */
+static void __exit tpm_st33_spi_exit(void)
+{
+	FUNC_ENTER();
+	spi_unregister_driver(&tpm_st33_spi_driver);
+}
+
+module_init(tpm_st33_spi_init);
+module_exit(tpm_st33_spi_exit);
+
+MODULE_AUTHOR("Christophe Ricard (tpmsupport@xxxxxx)");
+MODULE_DESCRIPTION("STM TPM SPI ST33 Driver");
+MODULE_VERSION("1.2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_stm_st33_spi.h b/drivers/char/tpm/tpm_stm_st33_spi.h
new file mode 100644
index 0000000..96e91ba
--- /dev/null
+++ b/drivers/char/tpm/tpm_stm_st33_spi.h
@@ -0,0 +1,79 @@
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST33NP18
+ * Copyright (C) 2009, 2010  STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@xxxxxx
+ *
+ * @File: stm_st33_tpm_i2c.h
+ *
+ * @Date: 09/15/2010
+ */
+#ifndef __STM_ST33_TPM_I2C_MAIN_H__
+#define __STM_ST33_TPM_I2C_MAIN_H__
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+
+#define MINOR_NUM_I2C		224
+
+/*#define TPM_DRIVER_NAME		"st33np18_i2c"*/
+
+#define TPM_ACCESS			(0x0)
+#define TPM_STS				(0x18)
+#define TPM_HASH_END			(0x20)
+#define TPM_DATA_FIFO			(0x24)
+#define TPM_HASH_DATA			(0x24)
+#define TPM_HASH_START			(0x28)
+#define TPM_INTF_CAPABILITY		(0x14)
+#define TPM_INT_STATUS			(0x10)
+#define TPM_INT_ENABLE			(0x08)
+
+#define TPM_DUMMY_BYTE			0x00
+#define TPM_WRITE_DIRECTION		0x80
+#define TPM_HEADER_SIZE			10
+#define TPM_BUFSIZE			2048
+
+/* ioctl commands */
+#define TPMIOC_CANCEL		_IO('T', 0x00)
+#define TPMIOC_TRANSMIT		_IO('T', 0x01)
+#define TPMIOC_HASH		_IO('T', 0x02)
+#define TPMIOC_CHANGELOCALITY	_IO('T', 0x03)
+
+#define LOCALITY0		0
+#define LOCALITY4		4
+
+#define TPM_ST_SPI_OK		0x5A
+
+
+#define MAX_SPI_LATENCY		15
+
+struct st_tpm_hash {
+	int size;
+	u8 *data;
+} st_tpm_hash_t;
+
+#endif /* __STM_ST33_TPM_I2C_MAIN_H__ */
diff --git a/include/linux/spi/tpm_stm_st33_spi.h b/include/linux/spi/tpm_stm_st33_spi.h
new file mode 100644
index 0000000..4bf31c4
--- /dev/null
+++ b/include/linux/spi/tpm_stm_st33_spi.h
@@ -0,0 +1,46 @@
+/*
+* STMicroelectronics TPM SPI Linux driver for TPM ST33NP18
+* Copyright (C) 2009, 2010 STMicroelectronics
+* Christophe RICARD tpmsupport@xxxxxx
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*
+* STMicroelectronics version 1.2.0, Copyright (C) 2010
+* STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+* This is free software, and you are welcome to redistribute it
+* under certain conditions.
+*
+* @File: stm_st33_tpm_spi.h
+*
+* @Date: 06/15/2008
+*/
+#ifndef __STM_ST33_TPM_SPI_H__
+#define __STM_ST33_TPM_SPI_H__
+
+#include <linux/spi/spi.h>
+
+#define TPM_ST33_SPI		"st33zp24_spi"
+
+#ifndef __STM_ST33_TPM_I2C_H__
+struct st33zp24_platform_data {
+	int io_serirq;
+	int io_lpcpd;
+	int latency;
+	bool bChipF;
+	u8 *tpm_spi_buffer[2]; /* 0 Request 1 Response */
+	struct completion irq_detection;
+};
+#endif
+
+#endif /* __STM_ST33_TPM_SPI_H__ */
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/