[PATCH 12/14] ARM: tegra: tec: Add PCIe support

[Thierry Reding]

Enable the first PCIe root port which is connected to an FPGA on the
Tamonten Evaluation Carrier and add device nodes for each of the PCI
endpoints available in the standard configuration.

Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/tegra20-tec.dts | 198 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 198 insertions(+)

diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 25f70ee..b75f979 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -60,6 +60,204 @@
 		};
 	};
 
+	pcie-controller {
+		vdd-supply = <&pci_vdd_reg>;
+		pex-clk-supply = <&pci_clk_reg>;
+		status = "okay";
+
+		pci@1,0 {
+			bus-range = <0x01 0x0a>;
+			status = "okay";
+
+			pci@0,0 {
+				reg = <0x010000 0 0 0 0>;
+				bus-range = <0x02 0x0a>;
+
+				compatible = "plda,pcie";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				pci@0,0 {
+					reg = <0x020000 0 0 0 0>;
+					bus-range = <0x03 0x03>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci-test-ep@0,0 {
+						compatible = "ad,pcietest";
+						reg = <0x030000 0 0 0 0>;
+					};
+				};
+
+				pci@1,0 {
+					reg = <0x020800 0 0 0 0>;
+					bus-range = <0x04 0x04>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci@0,0 {
+						compatible = "opencores,spi";
+						reg = <0x040000 0 0 0 0>;
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						clock-frequency = <66000000>;
+
+						m25p80@0 {
+							compatible = "m25p80";
+							reg = <0>;
+
+							spi-max-frequency = <25000000>;
+
+							#address-cells = <1>;
+							#size-cells = <1>;
+
+							partition@0 {
+								reg = <0x00000000 0x00400000>;
+								label = "FPGA";
+							};
+
+							partition@400000 {
+								reg = <0x00400000 0x00400000>;
+								label = "FPGA (gold)";
+								read-only;
+							};
+						};
+					};
+				};
+
+				pci@2,0 {
+					reg = <0x021000 0 0 0 0>;
+					bus-range = <0x05 0x05>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci-i2c-ep@0,0 {
+						compatible = "opencores,i2c";
+						reg = <0x050000 0 0 0 0>;
+
+						clock-frequency = <66000000>;
+						reg-io-width = <4>;
+						reg-shift = <3>;
+					};
+				};
+
+				pci@3,0 {
+					reg = <0x021800 0 0 0 0>;
+					bus-range = <0x06 0x06>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci@0,0 {
+						compatible = "ad,gpio-ad64p";
+						reg = <0x060000 0 0 0 0>;
+
+						gpio-controller;
+						#gpio-cells = <2>;
+
+						interrupt-controller;
+						#interrupt-cells = <2>;
+					};
+				};
+
+				pci@4,0 {
+					reg = <0x022000 0 0 0 0>;
+					bus-range = <0x07 0x07>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci@0,0 {
+						compatible = "opencores,uart";
+						reg = <0x070000 0 0 0 0>;
+					};
+				};
+
+				pci@5,0 {
+					reg = <0x022800 0 0 0 0>;
+					bus-range = <0x08 0x08>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci@0,0 {
+						compatible = "opencores,ethmac";
+						reg = <0x080000 0 0 0 0>;
+					};
+				};
+
+				pci@6,0 {
+					reg = <0x023000 0 0 0 0>;
+					bus-range = <0x09 0x09>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci@0,0 {
+						compatible = "opencores,can";
+						reg = <0x090000 0 0 0 0>;
+					};
+				};
+
+				pci@7,0 {
+					reg = <0x023800 0 0 0 0>;
+					bus-range = <0x0a 0x0a>;
+
+					compatible = "ad,pcie";
+					device_type = "pci";
+
+					#address-cells = <3>;
+					#size-cells = <2>;
+
+					pci@0,0 {
+						compatible = "opencores,can";
+						reg = <0x0a0000 0 0 0 0>;
+					};
+				};
+			};
+		};
+	};
+
+	regulators {
+		pci_vdd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 0>;
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "ad,tegra-audio-wm8903-tec",
 			     "nvidia,tegra-audio-wm8903";
-- 
1.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/