[ 023/171] libata: set dma_mode to 0xff in reset

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Lu <aaron.lu@xxxxxxxxx>

commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream.

ata_device->dma_mode's initial value is zero, which is not a valid dma
mode, but ata_dma_enabled will return true for this value. This patch
sets dma_mode to 0xff in reset function, so that ata_dma_enabled will
not return true for this case, or it will cause problem for pata_acpi.

The corrsponding bugzilla page is at:
https://bugzilla.kernel.org/show_bug.cgi?id=49151

Reported-by: Phillip Wood <phillip.wood@xxxxxxxxxxxxx>
Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
Tested-by: Szymon Janc <szymon@xxxxxxxxxxx>
Tested-by: Dutra Julio <dutra.julio@xxxxxxxxx>
Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
Signed-off-by: Jeff Garzik <jgarzik@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/ata/libata-core.c |    1 +
 drivers/ata/libata-eh.c   |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2536,6 +2536,7 @@ int ata_bus_probe(struct ata_port *ap)
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2600,6 +2600,7 @@ int ata_eh_reset(struct ata_link *link,
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/