Re: [PATCH V2] mips: function tracer: Fix broken function tracing

From: Geert Uytterhoeven
Date: Thu Jan 17 2013 - 01:27:06 EST


On Thu, Jan 17, 2013 at 12:43 AM, Al Cooper <alcooperx@xxxxxxxxx> wrote:
> Part of the sequence is "addiu sp,sp,-8" in the delay slot after every
> call to the trace routine "_mcount" (some legacy thing where 2 arguments
> used to be pushed on the stack). The _mcount routine is expected to
> adjust the sp by +8 before returning.

So when not disabled, the original jalr and addiu will be there, so _mcount has
to adjust sp.

> The problem is that when tracing is disabled for a function, the
> "jalr _mcount" instruction is replaced with a nop, but the
> "addiu sp,sp,-8" is still executed and the stack pointer is left
> trashed. When frame pointers are enabled the problem is masked
> because any access to the stack is done through the frame
> pointer and the stack pointer is restored from the frame pointer when
> the function returns.
>
> This patch writes two nops starting at the address of the "jalr _mcount"
> instruction whenever tracing is disabled. This means that the
> "addiu sp,sp.-8" will be converted to a nop along with the "jalr".

When disabled, there will be two nops.

> This is SMP safe because the first time this happens is during
> ftrace_init() which is before any other processor has been started.
> Subsequent calls to enable/disable tracing when other CPUs ARE running
> will still be safe because the enable will only change the first nop
> to a "jalr" and the disable, while writing 2 nops, will only be changing

When re-enabled, there will be a jalr and a nop, which differs from the initial
case, so _mcount doesn't have to adjust sp?

> @@ -69,7 +68,7 @@ NESTED(ftrace_caller, PT_SIZE, ra)
> .globl _mcount
> _mcount:
> b ftrace_stub
> - nop
> + addiu sp,sp,8
> lw t1, function_trace_stop
> bnez t1, ftrace_stub
> nop

But _mcount will always adjust the stack pointer?
What am I missing?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/