linux-3.7.4: Regression causing a kmemleak in drm_pci_set_busid()
From: Martin Mokrejs
Date: Wed Jan 23 2013 - 06:20:38 EST
Hi,
I have kmemleak detector enabled since 3.7.1 but now, with 3.7.4 I get the following:
comm "X", pid 5475, jiffies 4294992244 (age 133695.910s)
hex dump (first 32 bytes):
69 39 31 35 40 70 63 69 3a 30 30 30 30 3a 30 30 i915@pci:0000:00
3a 30 32 2e 30 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 :02.0.kkkkkkkkk.
backtrace:
[<ffffffff815b4aad>] kmemleak_alloc+0x21/0x3e
[<ffffffff81110352>] slab_post_alloc_hook+0x28/0x2a
[<ffffffff8111288a>] __kmalloc+0xf2/0x104
[<ffffffffa0077c0b>] drm_pci_set_busid+0xf6/0x12b [drm]
[<ffffffffa0072a04>] drm_setversion+0xaf/0x177 [drm]
[<ffffffffa00707b1>] drm_ioctl+0x309/0x3c9 [drm]
[<ffffffff81125e7e>] do_vfs_ioctl+0x462/0x4a3
[<ffffffff81125f06>] sys_ioctl+0x47/0x69
[<ffffffff815dd716>] system_call_fastpath+0x1a/0x1f
[<ffffffffffffffff>] 0xffffffffffffffff
Hope this helps,
Martin
[ 0.000000] Linux version 3.7.4-default (root@vostro) (gcc version 4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #2 SMP Mon Jan 21 22:45:22 MET 2013
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1 slub_debug=AFPZ pcie_aspm=off
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A11 08/03/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaa88fff]
[ 0.000000] [mem 0x00000000-0xda9fffff] page 2M
[ 0.000000] [mem 0xdaa00000-0xdaa88fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xdaa88fff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x41fdfffff]
[ 0.000000] [mem 0x100000000-0x41fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x41fdfffff @ [mem 0xdaa7b000-0xdaa88fff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d38 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09BB6 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e30 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1ea8 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1ee8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2398 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff2510 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2548 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d90 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff3728 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff3810 00086 (v01 DELL M08 07DC0803 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
[ 0.000000] NODE_DATA [mem 0x41fdd9000-0x41fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xda4e4fff]
[ 0.000000] node 0: [mem 0xda528000-0xda792fff]
[ 0.000000] node 0: [mem 0xda967000-0xdaa88fff]
[ 0.000000] node 0: [mem 0x100000000-0x41fdfffff]
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 141 pages reserved
[ 0.000000] DMA zone: 3776 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 873650 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3225096 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 2 reached. Processor 2/0x1 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 2 reached. Processor 3/0x3 ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88041fa00000 s74560 r8192 d23744 u1048576
[ 0.000000] pcpu-alloc: s74560 r8192 d23744 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4102522
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 slub_debug=AFPZ pcie_aspm=off
[ 0.000000] PCIe ASPM is disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16328852k/17299456k available (6020k kernel code, 618500k absent, 352104k reserved, 3886k data, 688k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 2793.665 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.33 BogoMIPS (lpj=27936650)
[ 0.000190] pid_max: default: 32768 minimum: 301
[ 0.001827] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004979] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006368] Mount-cache hash table entries: 256
[ 0.008168] CPU: Physical Processor ID: 0
[ 0.008260] CPU: Processor Core ID: 0
[ 0.008352] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.008504] mce: CPU supports 7 MCE banks
[ 0.008606] CPU0: Thermal monitoring enabled (TM1)
[ 0.008706] process: using mwait in idle threads
[ 0.008799] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.009110] Freeing SMP alternatives: 16k freed
[ 0.009209] ACPI: Core revision 20120913
[ 0.240304] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.340258] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
[ 0.456110] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.456416] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.456518] ... version: 3
[ 0.456608] ... bit width: 48
[ 0.456698] ... generic registers: 4
[ 0.456789] ... value mask: 0000ffffffffffff
[ 0.456881] ... max period: 000000007fffffff
[ 0.456974] ... fixed-purpose events: 3
[ 0.457064] ... event mask: 000000070000000f
[ 0.458655] SMP alternatives: lockdep: fixing up alternatives
[ 0.458762] smpboot: Booting Node 0, Processors #1 OK
[ 0.472087] Brought up 2 CPUs
[ 0.472179] smpboot: Total of 2 processors activated (11174.66 BogoMIPS)
[ 0.473956] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.475184] devtmpfs: initialized
[ 0.477369] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.477743] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.480690] xor: automatically using best checksumming function:
[ 0.575932] avx : 19552.000 MB/sec
[ 0.577675] regulator-dummy: no parameters
[ 0.578596] NET: Registered protocol family 16
[ 0.582224] ACPI: bus type pci registered
[ 0.583232] dca service started, version 1.12.1
[ 0.583537] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.583684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.591043] PCI: Using configuration type 1 for base access
[ 0.644690] bio: create slab <bio-0> at 0
[ 0.805588] raid6: sse2x1 7553 MB/s
[ 0.975327] raid6: sse2x2 9341 MB/s
[ 1.145070] raid6: sse2x4 10796 MB/s
[ 1.145071] raid6: using algorithm sse2x4 (10796 MB/s)
[ 1.145072] raid6: using ssse3x2 recovery algorithm
[ 1.145202] ACPI: Added _OSI(Module Device)
[ 1.145300] ACPI: Added _OSI(Processor Device)
[ 1.145400] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.145501] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.151487] ACPI: EC: Look up EC in DSDT
[ 1.162173] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.270145] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.331032] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.334258] ACPI: Dynamic OEM Table Load:
[ 1.334261] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.363303] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.368167] ACPI: Dynamic OEM Table Load:
[ 1.368169] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.407626] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.410255] ACPI: Dynamic OEM Table Load:
[ 1.410257] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.438684] ACPI: Interpreter enabled
[ 1.438778] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.439458] ACPI: Using IOAPIC for interrupt routing
[ 1.709643] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.722032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.738471] PCI host bridge to bus 0000:00
[ 1.738572] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.738673] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.738773] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.738874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.738976] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.739078] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.739179] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.739280] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.739382] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.739482] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.739584] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.739686] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.739789] pci_bus 0000:00: scanning bus
[ 1.739827] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.739834] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0xa
[ 1.739928] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.739944] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.739952] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.739958] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.740074] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.740115] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.740246] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.740270] pci 0000:00:16.0: PME# disabled
[ 1.740339] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.740374] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.740530] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.740535] pci 0000:00:1a.0: PME# disabled
[ 1.740589] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.740618] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.740757] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.740763] pci 0000:00:1b.0: PME# disabled
[ 1.740810] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.740880] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x1d
[ 1.740963] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.740969] pci 0000:00:1c.0: PME# disabled
[ 1.741021] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.741089] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x1d
[ 1.741172] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.741178] pci 0000:00:1c.1: PME# disabled
[ 1.741232] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.741299] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x1d
[ 1.741384] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.741389] pci 0000:00:1c.3: PME# disabled
[ 1.741439] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.741508] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x1d
[ 1.741591] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.741596] pci 0000:00:1c.4: PME# disabled
[ 1.741654] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.741721] pci 0000:00:1c.7: calling pci_fixup_transparent_bridge+0x0/0x1d
[ 1.741804] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.741810] pci 0000:00:1c.7: PME# disabled
[ 1.741866] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.741901] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.742057] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.742062] pci 0000:00:1d.0: PME# disabled
[ 1.742110] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.742322] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.742359] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.742374] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.742388] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.742402] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.742416] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.742431] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.742530] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.742535] pci 0000:00:1f.2: PME# disabled
[ 1.742578] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.742606] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.742646] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.742701] pci_bus 0000:00: fixups for bus
[ 1.742705] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0
[ 1.742792] pci_bus 0000:03: scanning bus
[ 1.742795] pci_bus 0000:03: fixups for bus
[ 1.742797] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.742905] pci_bus 0000:03: bus scan returning with max=03
[ 1.742911] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0
[ 1.742997] pci_bus 0000:05: scanning bus
[ 1.743043] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.743071] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.743118] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.743147] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.743283] pci 0000:05:00.0: supports D1 D2
[ 1.743285] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.743291] pci 0000:05:00.0: PME# disabled
[ 1.760895] pci_bus 0000:05: fixups for bus
[ 1.760897] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.760993] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.761006] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.761008] pci_bus 0000:05: bus scan returning with max=05
[ 1.761014] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0
[ 1.761102] pci_bus 0000:09: scanning bus
[ 1.761404] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.761757] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.763436] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.763486] pci 0000:09:00.0: PME# disabled
[ 1.780218] pci_bus 0000:09: fixups for bus
[ 1.780220] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.780321] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.780330] pci_bus 0000:09: bus scan returning with max=09
[ 1.780336] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0
[ 1.780423] pci_bus 0000:0b: scanning bus
[ 1.780482] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.780518] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.780547] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.780707] pci 0000:0b:00.0: supports D1 D2
[ 1.780709] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.780716] pci 0000:0b:00.0: PME# disabled
[ 1.780796] pci_bus 0000:0b: fixups for bus
[ 1.780798] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.780898] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.780907] pci_bus 0000:0b: bus scan returning with max=0b
[ 1.780913] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 0
[ 1.781005] pci_bus 0000:11: scanning bus
[ 1.781057] pci 0000:11:00.0: [1095:3132] type 00 class 0x018000
[ 1.781098] pci 0000:11:00.0: reg 10: [mem 0xf6c84000-0xf6c8407f 64bit]
[ 1.781131] pci 0000:11:00.0: reg 18: [mem 0xf6c80000-0xf6c83fff 64bit]
[ 1.781152] pci 0000:11:00.0: reg 20: [io 0xc000-0xc07f]
[ 1.781194] pci 0000:11:00.0: reg 30: [mem 0xf6c00000-0xf6c7ffff pref]
[ 1.781308] pci 0000:11:00.0: supports D1 D2
[ 1.800064] pci_bus 0000:11: fixups for bus
[ 1.800070] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.800197] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.800203] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.800212] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.800214] pci_bus 0000:11: bus scan returning with max=11
[ 1.800219] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1
[ 1.800229] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1
[ 1.800238] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1
[ 1.800247] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1
[ 1.800256] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 1
[ 1.800263] pci_bus 0000:00: bus scan returning with max=16
[ 1.800284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.807394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.808669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.810020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.811326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.813092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.817776] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
[ 1.994281] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.995923] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.997546] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.999164] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.001930] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.003622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.005309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 2.006915] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 2.009907] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.011332] vgaarb: loaded
[ 2.011421] vgaarb: bridge control possible 0000:00:02.0
[ 2.018426] SCSI subsystem initialized
[ 2.018524] ACPI: bus type scsi registered
[ 2.019169] libata version 3.00 loaded.
[ 2.019762] ACPI: bus type usb registered
[ 2.020345] usbcore: registered new interface driver usbfs
[ 2.020663] usbcore: registered new interface driver hub
[ 2.020983] usbcore: registered new device driver usb
[ 2.021659] media: Linux media interface: v0.10
[ 2.021968] Linux video capture interface: v2.00
[ 2.025887] wmi: Mapper loaded
[ 2.026341] Advanced Linux Sound Architecture Driver Initialized.
[ 2.026435] PCI: Using ACPI for IRQ routing
[ 2.028837] PCI: pci_cache_line_size set to 64 bytes
[ 2.028849] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6800000-0xf6bfffff flags 0x140204] (d=0, p=0)
[ 2.028852] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
[ 2.028854] pci 0000:00:02.0: BAR 4: reserving [io 0xf000-0xf03f flags 0x40101] (d=0, p=0)
[ 2.028859] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7f0a000-0xf7f0a00f flags 0x140204] (d=0, p=0)
[ 2.028864] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7f08000-0xf7f083ff flags 0x40200] (d=0, p=0)
[ 2.028869] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7f00000-0xf7f03fff flags 0x140204] (d=0, p=0)
[ 2.028886] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7f07000-0xf7f073ff flags 0x40200] (d=0, p=0)
[ 2.028893] pci 0000:00:1f.2: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0)
[ 2.028895] pci 0000:00:1f.2: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0)
[ 2.028897] pci 0000:00:1f.2: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0)
[ 2.028899] pci 0000:00:1f.2: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0)
[ 2.028901] pci 0000:00:1f.2: BAR 4: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0)
[ 2.028903] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7f06000-0xf7f067ff flags 0x40200] (d=0, p=0)
[ 2.028906] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7f05000-0xf7f050ff flags 0x140204] (d=0, p=0)
[ 2.028909] pci 0000:00:1f.3: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0)
[ 2.028914] pci 0000:05:00.0: BAR 0: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0)
[ 2.028916] pci 0000:05:00.0: BAR 2: reserving [mem 0xf1104000-0xf1104fff flags 0x14220c] (d=0, p=0)
[ 2.028918] pci 0000:05:00.0: BAR 4: reserving [mem 0xf1100000-0xf1103fff flags 0x14220c] (d=0, p=0)
[ 2.028947] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7e00000-0xf7e01fff flags 0x140204] (d=0, p=0)
[ 2.028955] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d0ffff flags 0x140204] (d=0, p=0)
[ 2.028957] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7d10000-0xf7d11fff flags 0x140204] (d=0, p=0)
[ 2.028963] pci 0000:11:00.0: BAR 0: reserving [mem 0xf6c84000-0xf6c8407f flags 0x140204] (d=0, p=0)
[ 2.028965] pci 0000:11:00.0: BAR 2: reserving [mem 0xf6c80000-0xf6c83fff flags 0x140204] (d=0, p=0)
[ 2.028967] pci 0000:11:00.0: BAR 4: reserving [io 0xc000-0xc07f flags 0x40101] (d=0, p=0)
[ 2.029041] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 2.029060] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff]
[ 2.029067] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff]
[ 2.029075] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff]
[ 2.029083] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 2.031223] Bluetooth: Core ver 2.16
[ 2.031498] NET: Registered protocol family 31
[ 2.031588] Bluetooth: HCI device and connection manager initialized
[ 2.031705] Bluetooth: HCI socket layer initialized
[ 2.031811] Bluetooth: L2CAP socket layer initialized
[ 2.031946] Bluetooth: SCO socket layer initialized
[ 2.033015] cfg80211: Calling CRDA to update world regulatory domain
[ 2.033821] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.034269] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.036377] Switching to clocksource hpet
[ 2.037134] pnp: PnP ACPI init
[ 2.037330] ACPI: bus type pnp registered
[ 2.045069] pnp 00:00: [bus 00-3e]
[ 2.045077] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.045083] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.045090] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.045097] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.045103] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 2.045109] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 2.045115] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 2.045121] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 2.045128] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 2.045135] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 2.045142] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 2.045148] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 2.045154] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 2.045160] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 2.045167] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 2.045173] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 2.045179] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 2.045185] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 2.045191] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 2.045606] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 2.045764] pnp 00:01: [io 0x0000-0x001f]
[ 2.045771] pnp 00:01: [io 0x0081-0x0091]
[ 2.045778] pnp 00:01: [io 0x0093-0x009f]
[ 2.045784] pnp 00:01: [io 0x00c0-0x00df]
[ 2.045791] pnp 00:01: [dma 4]
[ 2.046134] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.046253] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 2.046682] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.047927] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 2.048265] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.048413] pnp 00:04: [io 0x002e-0x002f]
[ 2.048419] pnp 00:04: [io 0x004e-0x004f]
[ 2.048425] pnp 00:04: [io 0x0061]
[ 2.048431] pnp 00:04: [io 0x0063]
[ 2.048437] pnp 00:04: [io 0x0065]
[ 2.048444] pnp 00:04: [io 0x0067]
[ 2.048450] pnp 00:04: [io 0x0070]
[ 2.048456] pnp 00:04: [io 0x0080]
[ 2.048462] pnp 00:04: [io 0x0092]
[ 2.048468] pnp 00:04: [io 0x00b2-0x00b3]
[ 2.048474] pnp 00:04: [io 0x0680-0x069f]
[ 2.048480] pnp 00:04: [io 0x1000-0x100f]
[ 2.048485] pnp 00:04: [io 0xffff]
[ 2.048493] pnp 00:04: [io 0xffff]
[ 2.048499] pnp 00:04: [io 0x0400-0x0453]
[ 2.048505] pnp 00:04: [io 0x0458-0x047f]
[ 2.048512] pnp 00:04: [io 0x0500-0x057f]
[ 2.048518] pnp 00:04: [io 0x164e-0x164f]
[ 2.048926] system 00:04: [io 0x0680-0x069f] has been reserved
[ 2.049037] system 00:04: [io 0x1000-0x100f] has been reserved
[ 2.049144] system 00:04: [io 0xffff] has been reserved
[ 2.049251] system 00:04: [io 0xffff] has been reserved
[ 2.049358] system 00:04: [io 0x0400-0x0453] has been reserved
[ 2.049467] system 00:04: [io 0x0458-0x047f] has been reserved
[ 2.049573] system 00:04: [io 0x0500-0x057f] has been reserved
[ 2.049680] system 00:04: [io 0x164e-0x164f] has been reserved
[ 2.049777] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.049899] pnp 00:05: [io 0x0070-0x0077]
[ 2.049915] pnp 00:05: [irq 8]
[ 2.050246] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.050744] pnp 00:06: [io 0x0454-0x0457]
[ 2.051135] system 00:06: [io 0x0454-0x0457] has been reserved
[ 2.051234] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 2.051349] pnp 00:07: [io 0x00f0-0x00ff]
[ 2.051361] pnp 00:07: [irq 13]
[ 2.051690] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.051909] pnp 00:08: [io 0x0010-0x001f]
[ 2.051915] pnp 00:08: [io 0x0022-0x003f]
[ 2.051922] pnp 00:08: [io 0x0044-0x005f]
[ 2.051929] pnp 00:08: [io 0x0068-0x006f]
[ 2.051935] pnp 00:08: [io 0x0072-0x007f]
[ 2.051941] pnp 00:08: [io 0x0080]
[ 2.051947] pnp 00:08: [io 0x0084-0x0086]
[ 2.051953] pnp 00:08: [io 0x0088]
[ 2.051959] pnp 00:08: [io 0x008c-0x008e]
[ 2.051966] pnp 00:08: [io 0x0090-0x009f]
[ 2.051972] pnp 00:08: [io 0x00a2-0x00bf]
[ 2.051978] pnp 00:08: [io 0x00e0-0x00ef]
[ 2.051984] pnp 00:08: [io 0x04d0-0x04d1]
[ 2.051990] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 2.052374] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 2.052484] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 2.052582] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.052800] pnp 00:09: [irq 12]
[ 2.053141] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 2.053353] pnp 00:0a: [io 0x0060]
[ 2.053359] pnp 00:0a: [io 0x0064]
[ 2.053365] pnp 00:0a: [io 0x0062]
[ 2.053371] pnp 00:0a: [io 0x0066]
[ 2.053382] pnp 00:0a: [irq 1]
[ 2.053710] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.059033] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 2.059040] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 2.059046] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 2.059053] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 2.059059] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 2.059065] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 2.059071] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 2.059078] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 2.059084] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 2.059091] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 2.059097] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 2.059504] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.059615] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.059724] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.059843] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.059955] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.060064] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.060175] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.060285] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.060396] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 2.060516] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.060627] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 2.060726] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.061833] pnp 00:0c: [irq 20]
[ 2.062200] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.064703] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 2.064709] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 2.065115] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 2.065228] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 2.065326] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.066058] pnp: PnP ACPI: found 14 devices
[ 2.066150] ACPI: ACPI bus type pnp unregistered
[ 2.066243] INFO_MDMA: LNW DMA Driver Version 1.1.0
[ 2.098289] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 2.098403] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 2.098498] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 2.098604] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 2.098709] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 2.098807] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 2.098914] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 2.099013] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 2.099121] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 2.099216] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 2.099314] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 2.099413] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 2.099657] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.099659] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.099660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.099662] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 2.099663] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 2.099664] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 2.099666] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 2.099668] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 2.099669] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 2.099671] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 2.099672] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 2.099674] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 2.099675] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 2.099677] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 2.099679] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 2.099680] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 2.099682] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 2.099683] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 2.099887] NET: Registered protocol family 2
[ 2.101840] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.103310] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 2.107136] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.107318] TCP: reno registered
[ 2.107520] UDP hash table entries: 8192 (order: 8, 1310720 bytes)
[ 2.108627] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes)
[ 2.110037] NET: Registered protocol family 1
[ 2.110710] RPC: Registered named UNIX socket transport module.
[ 2.110805] RPC: Registered udp transport module.
[ 2.110897] RPC: Registered tcp transport module.
[ 2.110987] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.111095] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xa6
[ 2.111097] pci 0000:00:02.0: Boot video device
[ 2.111105] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x655
[ 2.111150] pci 0000:00:1a.0: EHCI: BIOS handoff
[ 2.236337] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x655
[ 2.236421] pci 0000:00:1d.0: EHCI: BIOS handoff
[ 2.356177] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x655
[ 2.356259] PCI: CLS 64 bytes, default 64
[ 2.356613] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.356709] software IO TLB [mem 0xd64e5000-0xda4e4fff] (64MB) mapped at [ffff8800d64e5000-ffff8800da4e4fff]
[ 2.360363] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 2.360483] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 2.360961] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 2.367312] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 2.369208] audit: initializing netlink socket (disabled)
[ 2.369365] type=2000 audit(1358809217.150:1): initialized
[ 2.372347] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.415477] DLM installed
[ 2.427702] msgmni has been set to 31892
[ 2.432750] NET: Registered protocol family 38
[ 2.432878] async_tx: api initialized (async)
[ 2.432978] Key type asymmetric registered
[ 2.433078] Asymmetric key parser 'x509' registered
[ 2.433749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.433855] io scheduler noop registered
[ 2.433947] io scheduler deadline registered (default)
[ 2.434756] io scheduler cfq registered
[ 2.437553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.437648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.442223] pci_bus 0000:11: dev 00, created physical slot 1
[ 2.442518] acpiphp: Slot [1] registered
[ 2.443424] intel_idle: MWAIT substates: 0x21120
[ 2.443426] intel_idle: v0.4 model 0x2A
[ 2.443427] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.444692] ACPI: AC Adapter [AC] (on-line)
[ 2.446453] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 2.448328] ACPI: Lid Switch [LID0]
[ 2.448977] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.449116] ACPI: Power Button [PWRB]
[ 2.449756] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.449866] ACPI: Sleep Button [SBTN]
[ 2.450489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.450596] ACPI: Power Button [PWRF]
[ 2.451969] ACPI: Requesting acpi_cpufreq
[ 2.578930] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.579028] ACPI: Thermal Zone [THM] (65 C)
[ 2.584528] GHES: HEST is not enabled!
[ 2.584620] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 2.683362] ACPI: Battery Slot [BAT0] (battery present)
[ 2.772228] Non-volatile memory driver v1.3
[ 2.772610] Linux agpgart interface v0.103
[ 2.772906] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 2.772907] Hangcheck: Using getrawmonotonic().
[ 2.783817] loop: module loaded
[ 2.785709] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[ 2.785719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.785877] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 2.785884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.786040] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 2.786046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.786201] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 2.786208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.786355] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.787936] ahci 0000:00:1f.2: version 3.0
[ 2.788139] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 2.788284] ahci: SSS flag set, parallel bus scan disabled
[ 2.805427] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 2.805556] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 2.805707] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.855541] scsi0 : ahci
[ 2.857605] scsi1 : ahci
[ 2.858562] scsi2 : ahci
[ 2.859530] scsi3 : ahci
[ 2.860494] scsi4 : ahci
[ 2.861457] scsi5 : ahci
[ 2.862356] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 40
[ 2.862453] ata2: DUMMY
[ 2.862541] ata3: DUMMY
[ 2.862629] ata4: DUMMY
[ 2.862718] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 40
[ 2.862814] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 40
[ 2.864356] tun: Universal TUN/TAP device driver, 1.6
[ 2.864449] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 2.865027] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.865176] r8169 0000:05:00.0: enabling Mem-Wr-Inval
[ 2.865447] r8169 0000:05:00.0: irq 41 for MSI/MSI-X
[ 2.866825] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc9000184a000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 41
[ 2.866974] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.867405] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 2.867967] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.868064] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 2.868185] ehci_hcd 0000:00:1a.0: enabling bus mastering
[ 2.868191] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.868194] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.868396] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.868522] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.868617] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 2.868621] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 2.868698] ehci_hcd 0000:00:1a.0: support lpm
[ 2.868718] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.872596] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.872597] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 2.872720] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 2.872816] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.885283] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.885780] usb usb1: default language 0x0409
[ 2.885899] usb usb1: udev 1, busnum 1, minor = 0
[ 2.885901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.885996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.886094] usb usb1: Product: EHCI Host Controller
[ 2.886186] usb usb1: Manufacturer: Linux 3.7.4-default ehci_hcd
[ 2.886279] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.887711] usb usb1: usb_probe_device
[ 2.887713] usb usb1: configuration #1 chosen from 1 choice
[ 2.887867] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.888306] hub 1-0:1.0: usb_probe_interface
[ 2.888308] hub 1-0:1.0: usb_probe_interface - got id
[ 2.888314] hub 1-0:1.0: USB hub found
[ 2.888485] hub 1-0:1.0: 2 ports detected
[ 2.888585] hub 1-0:1.0: standalone hub
[ 2.888586] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.888587] hub 1-0:1.0: individual port over-current protection
[ 2.888589] hub 1-0:1.0: power on to power good time: 20ms
[ 2.888730] hub 1-0:1.0: local power source is good
[ 2.890359] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.891003] ehci_hcd 0000:00:1d.0: enabling bus mastering
[ 2.891009] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.891012] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.891140] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.891264] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.891358] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 2.891361] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 2.891416] ehci_hcd 0000:00:1d.0: support lpm
[ 2.891422] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.895298] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.895300] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.895424] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 2.895521] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.915308] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.915661] usb usb2: default language 0x0409
[ 2.915772] usb usb2: udev 1, busnum 2, minor = 128
[ 2.915773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.915869] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.915967] usb usb2: Product: EHCI Host Controller
[ 2.916059] usb usb2: Manufacturer: Linux 3.7.4-default ehci_hcd
[ 2.916153] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.917359] usb usb2: usb_probe_device
[ 2.917361] usb usb2: configuration #1 chosen from 1 choice
[ 2.917416] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.917800] hub 2-0:1.0: usb_probe_interface
[ 2.917802] hub 2-0:1.0: usb_probe_interface - got id
[ 2.917805] hub 2-0:1.0: USB hub found
[ 2.917961] hub 2-0:1.0: 2 ports detected
[ 2.918060] hub 2-0:1.0: standalone hub
[ 2.918062] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.918063] hub 2-0:1.0: individual port over-current protection
[ 2.918065] hub 2-0:1.0: power on to power good time: 20ms
[ 2.918126] hub 2-0:1.0: local power source is good
[ 2.919641] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.920357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.920453] ohci_hcd: block sizes: ed 80 td 96
[ 2.920790] xhci_hcd 0000:0b:00.0: enabling bus mastering
[ 2.920795] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 2.920921] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 2.921349] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval
[ 2.921352] xhci_hcd 0000:0b:00.0: supports USB remote wakeup
[ 2.921380] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[ 2.921689] xhci_hcd 0000:0b:00.0: irq 42 for MSI/MSI-X
[ 2.921718] xhci_hcd 0000:0b:00.0: irq 43 for MSI/MSI-X
[ 2.921747] xhci_hcd 0000:0b:00.0: irq 44 for MSI/MSI-X
[ 2.922403] usb usb3: default language 0x0409
[ 2.922509] usb usb3: udev 1, busnum 3, minor = 256
[ 2.922511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.922608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.924025] usb usb3: Product: xHCI Host Controller
[ 2.924118] usb usb3: Manufacturer: Linux 3.7.4-default xhci_hcd
[ 2.924212] usb usb3: SerialNumber: 0000:0b:00.0
[ 2.925212] usb usb3: usb_probe_device
[ 2.925214] usb usb3: configuration #1 chosen from 1 choice
[ 2.925231] xHCI xhci_add_endpoint called for root hub
[ 2.925232] xHCI xhci_check_bandwidth called for root hub
[ 2.925268] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.925665] hub 3-0:1.0: usb_probe_interface
[ 2.925667] hub 3-0:1.0: usb_probe_interface - got id
[ 2.925670] hub 3-0:1.0: USB hub found
[ 2.925826] hub 3-0:1.0: 2 ports detected
[ 2.925926] hub 3-0:1.0: standalone hub
[ 2.925927] hub 3-0:1.0: individual port power switching
[ 2.925928] hub 3-0:1.0: individual port over-current protection
[ 2.925930] hub 3-0:1.0: Single TT
[ 2.925931] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.925933] hub 3-0:1.0: power on to power good time: 20ms
[ 2.925997] hub 3-0:1.0: local power source is good
[ 2.926344] hub 3-0:1.0: enabling power on all ports
[ 2.926875] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 2.926993] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 2.927111] xhci_hcd 0000:0b:00.0: supports USB remote wakeup
[ 2.927342] usb usb4: skipped 1 descriptor after endpoint
[ 2.927378] usb usb4: default language 0x0409
[ 2.927496] usb usb4: udev 1, busnum 4, minor = 384
[ 2.927498] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.927594] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.927690] usb usb4: Product: xHCI Host Controller
[ 2.927783] usb usb4: Manufacturer: Linux 3.7.4-default xhci_hcd
[ 2.927877] usb usb4: SerialNumber: 0000:0b:00.0
[ 2.928717] usb usb4: usb_probe_device
[ 2.928719] usb usb4: configuration #1 chosen from 1 choice
[ 2.928737] xHCI xhci_add_endpoint called for root hub
[ 2.928738] xHCI xhci_check_bandwidth called for root hub
[ 2.928810] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.929200] hub 4-0:1.0: usb_probe_interface
[ 2.929202] hub 4-0:1.0: usb_probe_interface - got id
[ 2.929205] hub 4-0:1.0: USB hub found
[ 2.929365] hub 4-0:1.0: 2 ports detected
[ 2.929465] hub 4-0:1.0: standalone hub
[ 2.929467] hub 4-0:1.0: individual port power switching
[ 2.929468] hub 4-0:1.0: individual port over-current protection
[ 2.929470] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.929471] hub 4-0:1.0: power on to power good time: 20ms
[ 2.929538] hub 4-0:1.0: local power source is good
[ 2.929878] hub 4-0:1.0: enabling power on all ports
[ 2.975694] Initializing USB Mass Storage driver...
[ 2.976043] usbcore: registered new interface driver usb-storage
[ 2.976137] USB Mass Storage support registered.
[ 2.976407] usbcore: registered new interface driver ums-datafab
[ 2.976677] usbcore: registered new interface driver ums-freecom
[ 2.977003] usbcore: registered new interface driver ums-realtek
[ 2.977275] usbcore: registered new interface driver ums-usbat
[ 2.977811] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 2.980609] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.980761] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.982360] mousedev: PS/2 mouse device common for all mice
[ 2.985158] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.985169] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.985383] usbcore: registered new interface driver synaptics_usb
[ 2.985886] rtc_cmos 00:05: RTC can wake from S4
[ 2.986730] rtc_cmos: dev (254:0)
[ 2.986758] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.986913] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.987181] i2c /dev entries driver
[ 2.987824] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[ 2.987832] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.988233] Driver for 1-wire Dallas network protocol.
[ 2.989977] coretemp coretemp.0: TjMax is 100 degrees C
[ 2.990013] coretemp coretemp.0: TjMax is 100 degrees C
[ 2.990054] coretemp coretemp.0: TjMax is 100 degrees C
[ 2.990087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.990289] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.991382] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.991638] iTCO_vendor_support: vendor-support=0
[ 2.991747] md: linear personality registered for level -1
[ 2.991843] md: raid0 personality registered for level 0
[ 2.991936] md: raid1 personality registered for level 1
[ 2.992029] md: raid10 personality registered for level 10
[ 2.992121] md: raid6 personality registered for level 6
[ 2.992213] md: raid5 personality registered for level 5
[ 2.992306] md: raid4 personality registered for level 4
[ 2.993834] device-mapper: uevent: version 1.0.3
[ 2.995045] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx
[ 2.997991] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 2.999076] usbcore: registered new interface driver btusb
[ 2.999901] cpuidle: using governor ladder
[ 3.001121] cpuidle: using governor menu
[ 3.001497] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.001805] sdhci: Secure Digital Host Controller Interface driver
[ 3.001901] sdhci: Copyright(c) Pierre Ossman
[ 3.006757] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.011177] usbcore: registered new interface driver usbhid
[ 3.011271] usbhid: USB HID core driver
[ 3.013001] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 3.015491] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 3.015748] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 3.015760] hub 2-0:1.0: port 1: status 0501 change 0001
[ 3.025155] hub 3-0:1.0: port 1: status 0101 change 0001
[ 3.025329] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.027907] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.027993] hub 4-0:1.0: reset change on port 1
[ 3.028021] hub 4-0:1.0: warm reset change on port 1
[ 3.028049] hub 4-0:1.0: port 1, status 0203, change 0031, 5.0 Gb/s
[ 3.101733] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 3.118277] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.119478] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.120657] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.126602] TCP: cubic registered
[ 3.126695] NET: Registered protocol family 17
[ 3.126951] Bluetooth: RFCOMM TTY layer initialized
[ 3.127071] Bluetooth: RFCOMM socket layer initialized
[ 3.127164] Bluetooth: RFCOMM ver 1.11
[ 3.127254] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.127347] Bluetooth: BNEP filters: protocol multicast
[ 3.127451] Bluetooth: BNEP socket layer initialized
[ 3.127544] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.127650] Bluetooth: HIDP socket layer initialized
[ 3.135805] sctp: Hash tables configured (established 65536 bind 65536)
[ 3.136976] Key type dns_resolver registered
[ 3.139836] PM: Checking hibernation image partition /dev/sda6
[ 3.204890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.204950] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x203
[ 3.219820] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.220324] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.220449] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.220761] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 3.235897] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.236612] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 3.236625] ata1.00: configured for UDMA/133
[ 3.255640] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.260174] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.260274] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.260817] sd 0:0:0:0: [sda] Write Protect is off
[ 3.260911] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.261092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.261305] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.325864] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.354747] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[ 3.354864] Switching to clocksource tsc
[ 3.357352] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.362676] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.496156] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 3.605117] usb 4-1: skipped 1 descriptor after endpoint
[ 3.614258] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.620191] usb 4-1: default language 0x0409
[ 3.624059] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 3.634495] ata5.00: configured for UDMA/100
[ 3.650670] usb 4-1: udev 2, busnum 4, minor = 385
[ 3.650673] usb 4-1: New USB device found, idVendor=2109, idProduct=0810
[ 3.650776] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.650873] usb 4-1: Product: 4-Port USB 3.0 Hub
[ 3.651009] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 3.651791] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 3.652391] usb 4-1: usb_probe_device
[ 3.652395] usb 4-1: configuration #1 chosen from 1 choice
[ 3.662255] usb 4-1: Successful Endpoint Configure command
[ 3.666541] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 3.667132] hub 4-1:1.0: usb_probe_interface
[ 3.667136] hub 4-1:1.0: usb_probe_interface - got id
[ 3.667146] hub 4-1:1.0: USB hub found
[ 3.672935] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.672944] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.675054] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.676257] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.266053] ACPI: Invalid Power Resource to register!
[ 3.680482] ACPI: Invalid Power Resource to register!
[ 3.720936] hub 4-1:1.0: 4 ports detected
[ 3.721047] hub 4-1:1.0: standalone hub
[ 3.721049] hub 4-1:1.0: individual port power switching
[ 3.721050] hub 4-1:1.0: individual port over-current protection
[ 3.721052] hub 4-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.721053] hub 4-1:1.0: power on to power good time: 0ms
[ 3.726766] usb 4-1: Successful Endpoint Configure command
[ 3.732552] hub 4-1:1.0: local power source is good
[ 3.738178] hub 4-1:1.0: enabling power on all ports
[ 3.761660] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 3.761692] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.814188] ehci_hcd 0000:00:1a.0: port 1 reset complete, port enabled
[ 3.814193] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 3.873926] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.934134] ehci_hcd 0000:00:1a.0: port 1 reset complete, port enabled
[ 3.934139] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 3.977352] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input10
[ 3.992916] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
[ 4.023664] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.024009] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 4.024029] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 4.026393] usb 1-1: udev 2, busnum 1, minor = 1
[ 4.026396] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.026497] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.026672] ata6.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
[ 4.026766] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.027286] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 4.027560] usb 1-1: usb_probe_device
[ 4.027564] usb 1-1: configuration #1 chosen from 1 choice
[ 4.029746] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 4.030211] hub 1-1:1.0: usb_probe_interface
[ 4.030213] hub 1-1:1.0: usb_probe_interface - got id
[ 4.030217] hub 1-1:1.0: USB hub found
[ 4.030382] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 4.030385] ata6.00: configured for UDMA/133
[ 4.030507] hub 1-1:1.0: 6 ports detected
[ 4.030606] hub 1-1:1.0: standalone hub
[ 4.030607] hub 1-1:1.0: individual port power switching
[ 4.030609] hub 1-1:1.0: individual port over-current protection
[ 4.030610] hub 1-1:1.0: Single TT
[ 4.030612] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 4.030613] hub 1-1:1.0: power on to power good time: 100ms
[ 4.030915] hub 1-1:1.0: local power source is good
[ 4.030951] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 4.034962] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 4.035059] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 4.035614] sd 5:0:0:0: [sdb] Write Protect is off
[ 4.035707] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.035909] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.038633] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 4.048667] hub 1-1:1.0: enabling power on all ports
[ 4.050597] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 4.050633] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 4.083577] sdb: sdb1
[ 4.085833] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 4.085948] PM: Hibernation image partition 8:6 present
[ 4.085949] PM: Looking for hibernation image.
[ 4.103878] ehci_hcd 0000:00:1d.0: port 1 reset complete, port enabled
[ 4.103884] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 4.121551] PM: Image not found (code -22)
[ 4.121554] PM: Hibernation image not present or could not be loaded.
[ 4.121731] kmemleak: Kernel memory leak detector initialized
[ 4.121759] kmemleak: Automatic memory scanning thread started
[ 4.123996] rtc_cmos 00:05: setting system clock to 2013-01-21 23:00:19 UTC (1358809219)
[ 4.135788] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 4.140620] ALSA device list:
[ 4.140709] #0: HDA Intel PCH at 0xf7f00000 irq 45
[ 4.141155] md: Waiting for all devices to be available before autodetect
[ 4.141248] md: If you don't use raid, use raid=noautodetect
[ 4.143732] md: Autodetecting RAID arrays.
[ 4.143820] md: Scanned 0 and added 0 devices.
[ 4.143909] md: autorun ...
[ 4.144009] md: ... autorun DONE.
[ 4.144106] hub 1-1:1.0: port 5: status 0101 change 0001
[ 4.163575] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.214871] kjournald starting. Commit interval 5 seconds
[ 4.215163] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.215292] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.223707] ehci_hcd 0000:00:1d.0: port 1 reset complete, port enabled
[ 4.223723] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 4.243402] usb 1-1: link qh256-0001/ffff88040a84ee40 start 1 [1/0 us]
[ 4.255928] devtmpfs: mounted
[ 4.257571] Freeing unused kernel memory: 688k freed
[ 4.313548] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 4.313559] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 4.314206] usb 2-1: udev 2, busnum 2, minor = 129
[ 4.314216] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.314363] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.316934] usb 2-1: usb_probe_device
[ 4.316942] usb 2-1: configuration #1 chosen from 1 choice
[ 4.318434] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 4.319809] hub 2-1:1.0: usb_probe_interface
[ 4.319817] hub 2-1:1.0: usb_probe_interface - got id
[ 4.319831] hub 2-1:1.0: USB hub found
[ 4.320454] hub 2-1:1.0: 8 ports detected
[ 4.320624] hub 2-1:1.0: standalone hub
[ 4.320629] hub 2-1:1.0: individual port power switching
[ 4.320634] hub 2-1:1.0: individual port over-current protection
[ 4.320638] hub 2-1:1.0: Single TT
[ 4.320644] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 4.320649] hub 2-1:1.0: power on to power good time: 100ms
[ 4.321182] hub 2-1:1.0: local power source is good
[ 4.420250] hub 2-1:1.0: enabling power on all ports
[ 4.422644] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 4.422668] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 4.513519] hub 2-1:1.0: port 2: status 0101 change 0001
[ 4.532941] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 4.555660] usb 3-1: default language 0x0409
[ 4.556325] usb 3-1: udev 2, busnum 3, minor = 257
[ 4.556335] usb 3-1: New USB device found, idVendor=2109, idProduct=3431
[ 4.556479] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.556621] usb 3-1: Product: USB2.0 Hub
[ 4.559120] usb 3-1: usb_probe_device
[ 4.559131] usb 3-1: configuration #1 chosen from 1 choice
[ 4.588885] usb 3-1: Successful Endpoint Configure command
[ 4.589677] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 4.591144] hub 3-1:1.0: usb_probe_interface
[ 4.591154] hub 3-1:1.0: usb_probe_interface - got id
[ 4.591168] hub 3-1:1.0: USB hub found
[ 4.591974] hub 3-1:1.0: 4 ports detected
[ 4.592149] hub 3-1:1.0: standalone hub
[ 4.592155] hub 3-1:1.0: individual port power switching
[ 4.592159] hub 3-1:1.0: individual port over-current protection
[ 4.592164] hub 3-1:1.0: Single TT
[ 4.592170] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 4.592174] hub 3-1:1.0: Port indicators are supported
[ 4.592179] hub 3-1:1.0: power on to power good time: 100ms
[ 4.592886] usb 3-1: Successful Endpoint Configure command
[ 4.593473] hub 3-1:1.0: local power source is good
[ 4.595686] hub 3-1:1.0: enabling power on all ports
[ 4.604635] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 4.604658] hub 1-1:1.0: state 7 ports 6 chg 0020 evt 0000
[ 4.604774] usb 4-1: remote wakeup needed for autosuspend
[ 4.605018] hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 4.612819] usb 2-1: link qh256-0001/ffff88040a84e098 start 1 [1/0 us]
[ 4.683015] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.704083] hub 3-1:1.0: port 3: status 0301 change 0001
[ 4.704864] hub 3-1:1.0: port 4: status 0301 change 0001
[ 4.799491] usb 1-1.5: skipped 1 descriptor after configuration
[ 4.799502] usb 1-1.5: skipped 6 descriptors after interface
[ 4.799531] usb 1-1.5: skipped 1 descriptor after endpoint
[ 4.799538] usb 1-1.5: skipped 19 descriptors after interface
[ 4.799855] usb 1-1.5: skipped 1 descriptor after endpoint
[ 4.800219] usb 1-1.5: default language 0x0409
[ 4.801775] usb 1-1.5: udev 3, busnum 1, minor = 2
[ 4.801786] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.801934] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.802075] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.802210] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.804813] usb 1-1.5: usb_probe_device
[ 4.804824] usb 1-1.5: configuration #1 chosen from 1 choice
[ 4.805159] usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
[ 4.807772] usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1)
[ 4.810102] hub 2-1:1.0: state 7 ports 8 chg 0004 evt 0000
[ 4.810256] hub 2-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 4.882728] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[ 4.993755] usb 2-1.2: skipped 1 descriptor after interface
[ 4.994164] usb 2-1.2: default language 0x0409
[ 4.995344] usb 2-1.2: udev 3, busnum 2, minor = 130
[ 4.995354] usb 2-1.2: New USB device found, idVendor=13fd, idProduct=0550
[ 4.995502] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.995643] usb 2-1.2: Product: WD3200BEVE-00A0H
[ 4.995776] usb 2-1.2: Manufacturer: Initio
[ 4.995908] usb 2-1.2: SerialNumber: 00101005500011B80
[ 4.998560] usb 2-1.2: usb_probe_device
[ 4.998570] usb 2-1.2: configuration #1 chosen from 1 choice
[ 4.999046] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0)
[ 5.000403] usb-storage 2-1.2:1.0: usb_probe_interface
[ 5.000418] usb-storage 2-1.2:1.0: usb_probe_interface - got id
[ 5.001464] scsi6 : usb-storage 2-1.2:1.0
[ 5.005784] usb 2-1.2: adding 2-1.2:1.1 (config #1, interface 1)
[ 5.007129] usbhid 2-1.2:1.1: usb_probe_interface
[ 5.007135] usbhid 2-1.2:1.1: usb_probe_interface - got id
[ 5.012444] usbhid 2-1.2:1.1: looking for a minor, starting at 0
[ 5.013855] hid-generic 0003:13FD:0550.0001: hiddev0,hidraw0: USB HID v1.10 Device [Initio WD3200BEVE-00A0H] on usb-0000:00:1d.0-1.2/input1
[ 5.014379] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0020
[ 5.014582] hub 3-1:1.0: state 7 ports 4 chg 0018 evt 0000
[ 5.015163] hub 3-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
[ 5.092676] usb 3-1.3: new low-speed USB device number 3 using xhci_hcd
[ 5.118793] usb 3-1.3: skipped 1 descriptor after interface
[ 5.119770] usb 3-1.3: default language 0x0409
[ 5.123710] usb 3-1.3: udev 3, busnum 3, minor = 258
[ 5.123716] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c050
[ 5.123857] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.123964] usb 3-1.3: Product: USB-PS/2 Optical Mouse
[ 5.124066] usb 3-1.3: Manufacturer: Logitech
[ 5.125567] usb 3-1.3: usb_probe_device
[ 5.125572] usb 3-1.3: configuration #1 chosen from 1 choice
[ 5.125660] usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.131738] usb 3-1.3: Successful Endpoint Configure command
[ 5.132695] usb 3-1.3: adding 3-1.3:1.0 (config #1, interface 0)
[ 5.133327] usbhid 3-1.3:1.0: usb_probe_interface
[ 5.133328] usbhid 3-1.3:1.0: usb_probe_interface - got id
[ 5.139617] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input12
[ 5.141599] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1.3/input0
[ 5.142687] hub 3-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
[ 5.222606] usb 3-1.4: new low-speed USB device number 4 using xhci_hcd
[ 5.250876] usb 3-1.4: skipped 1 descriptor after interface
[ 5.252298] usb 3-1.4: default language 0x0409
[ 5.257324] usb 3-1.4: udev 4, busnum 3, minor = 259
[ 5.257334] usb 3-1.4: New USB device found, idVendor=04f2, idProduct=0116
[ 5.257483] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.257625] usb 3-1.4: Product: USB Keyboard
[ 5.257756] usb 3-1.4: Manufacturer: CHICONY
[ 5.260283] usb 3-1.4: usb_probe_device
[ 5.260294] usb 3-1.4: configuration #1 chosen from 1 choice
[ 5.260440] usb 3-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.291791] usb 3-1.4: Successful Endpoint Configure command
[ 5.292781] usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0)
[ 5.293387] usbhid 3-1.4:1.0: usb_probe_interface
[ 5.293390] usbhid 3-1.4:1.0: usb_probe_interface - got id
[ 5.301384] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input13
[ 5.303510] hid-generic 0003:04F2:0116.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:0b:00.0-1.4/input0
[ 5.304086] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0004
[ 6.004324] scsi 6:0:0:0: Direct-Access Initio WD3200BEVE-00A0H 3.12 PQ: 0 ANSI: 0
[ 6.011733] sd 6:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 6.013221] sd 6:0:0:0: [sdc] Write Protect is off
[ 6.013330] sd 6:0:0:0: [sdc] Mode Sense: 86 0b 00 02
[ 6.013424] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.014691] sd 6:0:0:0: [sdc] No Caching mode page present
[ 6.014781] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 6.019939] sd 6:0:0:0: [sdc] No Caching mode page present
[ 6.020029] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 6.020973] sdc: sdc1
[ 6.025102] sd 6:0:0:0: [sdc] No Caching mode page present
[ 6.025224] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 6.025315] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 9.293913] systemd-udevd[1958]: starting version 196
[ 11.422027] sata_sil24 0000:11:00.0: version 1.1
[ 11.427381] scsi7 : sata_sil24
[ 11.427938] scsi8 : sata_sil24
[ 11.428377] ata7: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c80000 irq 19
[ 11.428380] ata8: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c82000 irq 19
[ 12.556780] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 12.556783] Copyright(c) 2003-2012 Intel Corporation
[ 12.557120] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 12.557123] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90001874000
[ 12.557126] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 12.557641] iwlwifi 0000:09:00.0: irq 46 for MSI/MSI-X
[ 12.679623] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1
[ 13.509593] ata7: SATA link down (SStatus 0 SControl 0)
[ 13.990768] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 13.990772] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 13.991114] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 13.991118] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 13.991121] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 13.991124] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 13.991127] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 13.991132] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 13.991816] iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
[ 13.998827] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio.
[ 14.009349] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 14.009353] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 14.009356] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 14.010201] Registered led device: phy0-led
[ 14.011142] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.596437] ata8: SATA link down (SStatus 0 SControl 0)
[ 16.575830] [drm] Initialized drm 1.1.0 20060810
[ 17.168722] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 17.168883] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 17.169570] pci 0000:00:00.0: detected 65536K stolen memory
[ 17.169706] i915 0000:00:02.0: setting latency timer to 64
[ 17.207948] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 17.208051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.208052] [drm] Driver supports precise vblank timestamp query.
[ 17.208382] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.628193] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 18.214174] fbcon: inteldrmfb (fb0) is primary device
[ 19.323390] Console: switching to colour frame buffer device 170x48
[ 19.335223] fb0: inteldrmfb frame buffer device
[ 19.335226] drm: registered panic notifier
[ 19.414875] acpi device:34: registered as cooling_device2
[ 19.418734] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.419210] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 19.419936] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.727582] EXT3-fs (sda5): using internal journal
[ 22.246831] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 26.735521] r8169 0000:05:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 26.763781] r8169 0000:05:00.0 eth0: link down
[ 26.765158] r8169 0000:05:00.0 eth0: link down
[ 28.438571] r8169 0000:05:00.0 eth0: link up
[ 44.457132] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 44.457823] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 44.457827] perf_event_intel: PEBS enabled due to microcode update
[ 47.348410] r8169 0000:05:00.0 eth0: link down
[ 61.327619] r8169 0000:05:00.0 eth0: link up
[ 70.858379] kjournald starting. Commit interval 5 seconds
[ 70.859175] EXT3-fs (sdc1): using internal journal
[ 70.859178] EXT3-fs (sdc1): mounted filesystem with writeback data mode
[ 75.895183] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 258.616949] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 258.622417] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 258.622431] ata1.00: configured for UDMA/133
[ 258.622460] ata1: EH complete
[ 258.730297] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 258.732901] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 258.732914] ata6.00: configured for UDMA/133
[ 258.732941] ata6: EH complete
[ 259.257830] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 689.760580] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[ 1309.528860] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[ 7592.489133] hda-intel: Unstable LPIB (65528 >= 8192); disabling LPIB delay counting
[10985.856711] r8169 0000:05:00.0 eth0: link down
[41988.520692] r8169 0000:05:00.0 eth0: link up
[42006.969722] r8169 0000:05:00.0 eth0: link down
[42038.394621] r8169 0000:05:00.0 eth0: link up
[42041.799810] r8169 0000:05:00.0 eth0: link down
[42049.589376] r8169 0000:05:00.0 eth0: link up
[42134.563582] r8169 0000:05:00.0 eth0: link down
[42134.563589] r8169 0000:05:00.0 eth0: link down
[42136.750164] r8169 0000:05:00.0 eth0: link up
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02)
11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00: 86 80 04 01 06 00 90 20 09 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4162
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
00: 86 80 26 01 07 04 90 00 09 00 00 03 00 00 00 00
10: 04 00 80 f6 00 00 00 00 0c 00 00 e0 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7f0a000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00: 86 80 3a 1c 06 00 10 00 04 00 80 07 00 00 80 00
10: 04 a0 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00: 86 80 2d 1c 06 00 90 02 05 20 03 0c 00 00 00 00
10: 00 80 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4142
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00: 86 80 20 1c 06 04 10 00 05 00 03 04 10 00 00 00
10: 04 00 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 10 1c 07 00 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 04 00 f0 00 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 10 00
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 12 1c 07 00 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 05 06 00 e0 e0 00 00
20: f0 ff 00 00 11 f1 11 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 02 10 00
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 16 1c 07 00 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 09 0a 00 f0 00 00 20
20: e0 f7 e0 f7 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 18 1c 07 00 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 0b 0c 00 f0 00 00 20
20: d0 f7 d0 f7 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 10 00
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7f07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00: 86 80 26 1c 06 00 90 02 05 20 03 0c 00 00 00 00
10: 00 70 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00: 86 80 4b 1c 07 00 10 02 05 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7f06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00: 86 80 03 1c 07 04 b0 02 05 01 06 01 00 00 00 00
10: b1 f0 00 00 a1 f0 00 00 91 f0 00 00 81 f0 00 00
20: 61 f0 00 00 00 60 f0 f7 00 00 00 00 28 10 b3 04
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00: 86 80 22 1c 03 00 80 02 05 00 05 0c 00 00 00 00
10: 04 50 f0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 f0 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 03 00 00
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f1104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f1100000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41a1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
00: ec 10 68 81 07 04 10 00 06 00 00 02 10 00 00 00
10: 01 e0 00 00 00 00 00 00 0c 40 10 f1 00 00 00 00
20: 0c 00 10 f1 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 00 00
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4152
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 4c-80-93-ff-ff-15-e6-c7
Kernel driver in use: iwlwifi
00: 86 80 8a 00 06 00 10 00 34 00 80 02 10 00 00 00
10: 04 00 e0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 25 53
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02) (prog-if 30 [XHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f7d10000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [c0] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00001000
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Device Serial Number 08-00-28-00-00-20-00-00
Kernel driver in use: xhci_hcd
00: 4c 10 41 82 06 04 10 00 02 30 03 0c 10 00 00 00
10: 04 00 d0 f7 00 00 00 00 04 00 d1 f7 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b3 04
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
11:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6c84000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at f6c80000 (64-bit, non-prefetchable) [size=16K]
Region 4: I/O ports at c000 [size=128]
Expansion ROM at f6c00000 [disabled] [size=512K]
Capabilities: [54] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: sata_sil24
00: 95 10 32 31 07 00 10 00 01 00 80 01 10 00 00 00
10: 04 40 c8 f6 00 00 00 00 04 00 c8 f6 00 00 00 00
20: 01 c0 00 00 00 00 00 00 00 00 00 00 95 10 32 31
30: 00 00 c0 f6 54 00 00 00 00 00 00 00 0a 01 00 00