Re: [PATCH 2/3] mmc: davinci_mmc: add DT support

[Mark Rutland]

Hi,

On Mon, Feb 04, 2013 at 01:28:14PM +0000, Manjunathappa, Prakash wrote:
> Hi Mark,
> 
> On Thu, Jan 31, 2013 at 16:53:03, Mark Rutland wrote:
> > Hello,
> >
> > I have a few comments on the devicetree binding and the way it's parsed.
> >
> 
> Thanks for review.
> 
> > On Thu, Jan 31, 2013 at 10:33:06AM +0000, Manjunathappa, Prakash wrote:

[...]

> > > +- caps: Check for Host capabilities in <linux/mmc/host.h>
> >
> > Is this a set of binary flags? Also, is this Linux-specific?
> >
> > I really don't think this should be in the devicetree binding. Why do you need
> > this?
> >
> 
> I was using this to specify the below controller capabilities:
> MMC_CAP_MMC_HIGHSPEED and MMC_CAP_SD_HIGHSPEED,
> Found from discussion[1] that this can be derived from max-frequency,
> That is above capabilities are supported when max-frequency >= 50MHz.
> 
> [1] https://lkml.org/lkml/2012/10/15/231

Great!

[...]

> > > @@ -1156,16 +1157,75 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host)
> > >
> > >     mmc_davinci_reset_ctrl(host, 0);
> > >  }
> > > +#ifdef CONFIG_OF
> > > +static struct davinci_mmc_config
> > > +   *mmc_of_get_pdata(struct platform_device *pdev)
> > > +{
> > > +   struct device_node *np;
> > > +   struct davinci_mmc_config *pdata = NULL;
> > > +   u32 data;
> > > +   int ret;
> > > +
> > > +   pdata = pdev->dev.platform_data;
> > > +   if (!pdata) {
> > > +           pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> > > +           if (!pdata) {
> > > +                   dev_err(&pdev->dev, "Failed to allocate memory for struct davinci_mmc_config\n");
> > > +                   goto nodata;
> > > +           }
> > > +   }
> >
> > Why do you need to conditionally allocate this? This only seems to be called
> > once.
> >
> 
> This is common function for DT and non-DT kernel(will be removing #ifdef CONFIG_OF),
> So above check is necessary for to allocate pdata for DT kernel.

Ah. Am I right in thinking if you moved the check for pdev->dev.of_node above
the pdata allocation, it wouldn't have to be done conditionally?

> 
> > > +
> > > +   np = pdev->dev.of_node;
> > > +   if (!np)
> > > +           goto nodata;
> >
> > Why not just return immediately here? You do nothing special at nodata.
> >
> 
> Following convention to not have more than 1 return from function and have
> Common exit point. May not be necessary now since we have devm_* calls now.
> Can I still prefer to keep this goto?

It just looks a little odd to me. I have no strong feelings here.

[...]

> > > +
> > > +   ret = of_property_read_u32(np, "version", &data);
> > > +   if (ret)
> > > +           dev_err(&pdev->dev, "version not specified\n");
> > > +   pdata->version = data;
> >
> > And again, though I'd prefer to see this property go entirely.
> >
> 
> Yes this is going to go away.

Great!

> 
> > > +
> > > +nodata:
> > > +   return pdata;
> > > +}
> > > +
> > > +#else
> > > +static struct davinci_mmc_config
> > > +   *mmc_of_get_pdata(struct platform_device *pdev)
> > > +{
> > > +   return pdev->dev.platform_data;
> > > +}
> > > +#endif
> >
> > This is poorly named if it's required for !CONFIG_OF.
> >
> > Why not change this to something like mmc_parse_pdata, returning an
> > error code. For !CONFIG_OF, it can simply return 0, which should be less
> > surprising for anyone else reading this code.
> >
> 
> I will remove #ifdef CONFIG_OF conditional compilation and consideration
> your suggestion to name function as mmc_parse_pdata.

Sounds good.

> 
> > >
> > >  static int __init davinci_mmcsd_probe(struct platform_device *pdev)
> > >  {
> > > -   struct davinci_mmc_config *pdata = pdev->dev.platform_data;
> > > +   struct davinci_mmc_config *pdata = NULL;
> > >     struct mmc_davinci_host *host = NULL;
> > >     struct mmc_host *mmc = NULL;
> > >     struct resource *r, *mem = NULL;
> > >     int ret = 0, irq = 0;
> > >     size_t mem_size;
> > >
> > > +   pdata = mmc_of_get_pdata(pdev);
> > > +   if (pdata == NULL) {
> > > +           dev_err(&pdev->dev, "Can not get platform data\n");
> > > +           return -ENOENT;
> > > +   }
> > > +
> > >     /* REVISIT:  when we're fully converted, fail if pdata is NULL */
> > >
> > >     ret = -ENODEV;
> > > @@ -1403,11 +1463,18 @@ static const struct dev_pm_ops davinci_mmcsd_pm = {
> > >  #define davinci_mmcsd_pm_ops NULL
> > >  #endif
> > >
> > > +static const struct of_device_id davinci_mmc_of_match[] = {
> > > +   {.compatible = "ti,davinci_mmc", },
> > > +   {},
> > > +};
> > > +MODULE_DEVICE_TABLE(of, davinci_mmc_of_match);
> >
> > For supporting multiple versions, you could either use some auxdata
> > here, or check each one in davince_mmcsd_probe.
> >
> 
> I will consider keeping auxdata via compatible field.
> 
> > > +
> > >  static struct platform_driver davinci_mmcsd_driver = {
> > >     .driver         = {
> > >             .name   = "davinci_mmc",
> > >             .owner  = THIS_MODULE,
> > >             .pm     = davinci_mmcsd_pm_ops,
> > > +           .of_match_table = of_match_ptr(davinci_mmc_of_match),
> > >     },
> > >     .remove         = __exit_p(davinci_mmcsd_remove),
> > >  };
> >
> > Where does davinci_mmcsd_probe get called from, and how is the
> > of_match_table used? Should it not be set as .probe on the driver?
> >
> 
> Driver probe is registered in module_init.

Ah, I'd missed the module_init when scanning through the code.

I couldn't figure out how davinci_mmcsd_probe got called for elements matched
by the match table. I see platform_driver_probe temporarily sets the .probe on
the driver, so that makes sense now.

> And are you suggesting me to use module_platform_driver? If yes can it not
> be taken separately as it is unrelated to DT support I am adding.

No, I'd just managed to miss that which got called via module_init. It should
be fine as-is.

Thanks,
Mark.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/