[PATCH 3/7] HID: Kconfig: Remove explicit transport layer dependencies

From: Benjamin Tissoires
Date: Fri Feb 08 2013 - 09:38:31 EST

Next message: Benjamin Tissoires: "[PATCH 5/7] HID: use hid_hw_wait() instead of direct call to usbhid"
Previous message: Viresh Kumar: "Re: [PATCH 0/4] CPUFreq Fixes for 3.9"
In reply to: Benjamin Tissoires: "[PATCH 0/7] hid driver transport cleanup"
Next in thread: Benjamin Tissoires: "[PATCH 5/7] HID: use hid_hw_wait() instead of direct call to usbhid"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Most HID drivers (rightfully) only depend on the HID bus, not the
specific transport layer. Remove such dependencies where applicable.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
---
drivers/hid/Kconfig | 66 ++++++++++++++++++++++----------------------
drivers/hid/hid-apple.c | 1 -
drivers/hid/hid-magicmouse.c | 1 -
drivers/hid/hid-speedlink.c | 2 --
4 files changed, 33 insertions(+), 37 deletions(-)

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 69ab7c2..581ca9f 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -92,7 +92,7 @@ menu "Special HID drivers"

config HID_A4TECH
tristate "A4 tech mice" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for A4 tech X5 and WOP-35 / Trust 450L mice.
@@ -113,7 +113,7 @@ config HID_ACRUX_FF

config HID_APPLE
tristate "Apple {i,Power,Mac}Books" if EXPERT
- depends on (USB_HID || BT_HIDP)
+ depends on HID
default !EXPERT
---help---
Support for some Apple devices which less or more break
@@ -124,27 +124,27 @@ config HID_APPLE

config HID_AUREAL
tristate "Aureal"
- depends on USB_HID
+ depends on HID
---help---
Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.

config HID_BELKIN
tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Belkin Flip KVM and Wireless keyboard.

config HID_CHERRY
tristate "Cherry Cymotion keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Cherry Cymotion keyboard.

config HID_CHICONY
tristate "Chicony Tactical pad" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Chicony Tactical pad.
@@ -166,7 +166,7 @@ config HID_PRODIKEYS

config HID_CYPRESS
tristate "Cypress mouse and barcode readers" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for cypress mouse and barcode readers.
@@ -202,13 +202,13 @@ config HID_EMS_FF

config HID_ELECOM
tristate "ELECOM BM084 bluetooth mouse"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the ELECOM BM084 (bluetooth mouse).

config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Ezkey BTC 8193 keyboard.
@@ -231,7 +231,7 @@ config HOLTEK_FF

config HID_KEYTOUCH
tristate "Keytouch HID devices"
- depends on USB_HID
+ depends on HID
---help---
Support for Keytouch HID devices not fully compliant with
the specification. Currently supported:
@@ -249,25 +249,25 @@ config HID_KYE

config HID_UCLOGIC
tristate "UC-Logic"
- depends on USB_HID
+ depends on HID
---help---
Support for UC-Logic tablets.

config HID_WALTOP
tristate "Waltop"
- depends on USB_HID
+ depends on HID
---help---
Support for Waltop tablets.

config HID_GYRATION
tristate "Gyration remote control"
- depends on USB_HID
+ depends on HID
---help---
Support for Gyration remote control.

config HID_ICADE
tristate "ION iCade arcade controller"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the ION iCade arcade controller to work as a joystick.

@@ -276,20 +276,20 @@ config HID_ICADE

config HID_TWINHAN
tristate "Twinhan IR remote control"
- depends on USB_HID
+ depends on HID
---help---
Support for Twinhan IR remote control.

config HID_KENSINGTON
tristate "Kensington Slimblade Trackball" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Kensington Slimblade Trackball.

config HID_LCPOWER
tristate "LC-Power"
- depends on USB_HID
+ depends on HID
---help---
Support for LC-Power RC1000MCE RF remote control.

@@ -308,7 +308,7 @@ config HID_LENOVO_TPKBD

config HID_LOGITECH
tristate "Logitech devices" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Logitech devices that are not fully compliant with HID standard.
@@ -374,7 +374,7 @@ config LOGIWHEELS_FF

config HID_MAGICMOUSE
tristate "Apple MagicMouse multi-touch support"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the Apple Magic Mouse multi-touch.

@@ -383,14 +383,14 @@ config HID_MAGICMOUSE

config HID_MICROSOFT
tristate "Microsoft non-fully HID-compliant devices" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Microsoft devices that are not fully compliant with HID standard.

config HID_MONTEREY
tristate "Monterey Genius KB29E keyboard" if EXPERT
- depends on USB_HID
+ depends on HID
default !EXPERT
---help---
Support for Monterey Genius KB29E.
@@ -445,7 +445,7 @@ config HID_NTRIG

config HID_ORTEK
tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
- depends on USB_HID
+ depends on HID
---help---
There are certain devices which have LogicalMaximum wrong in the keyboard
usage page of their report descriptor. The most prevailing ones so far
@@ -473,7 +473,7 @@ config PANTHERLORD_FF

config HID_PETALYNX
tristate "Petalynx Maxter remote control"
- depends on USB_HID
+ depends on HID
---help---
Support for Petalynx Maxter remote control.

@@ -545,14 +545,14 @@ config HID_PICOLCD_CIR

config HID_PRIMAX
tristate "Primax non-fully HID-compliant devices"
- depends on USB_HID
+ depends on HID
---help---
Support for Primax devices that are not fully compliant with the
HID standard.

config HID_PS3REMOTE
tristate "Sony PS3 BD Remote Control"
- depends on BT_HIDP
+ depends on HID
---help---
Support for the Sony PS3 Blue-ray Disk Remote Control and Logitech
Harmony Adapter for PS3, which connect over Bluetooth.
@@ -569,7 +569,7 @@ config HID_ROCCAT

config HID_SAITEK
tristate "Saitek non-fully HID-compliant devices"
- depends on USB_HID
+ depends on HID
---help---
Support for Saitek devices that are not fully compliant with the
HID standard.
@@ -578,7 +578,7 @@ config HID_SAITEK

config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
- depends on USB_HID
+ depends on HID
---help---
Support for Samsung InfraRed remote control or keyboards.

@@ -604,7 +604,7 @@ config HID_STEELSERIES

config HID_SUNPLUS
tristate "Sunplus wireless desktop"
- depends on USB_HID
+ depends on HID
---help---
Support for Sunplus wireless desktop.

@@ -650,13 +650,13 @@ config SMARTJOYPLUS_FF

config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
- depends on (USB_HID || BT_HIDP)
+ depends on HID
---help---
Say Y if you have a TiVo Slide Bluetooth remote control.

config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
- depends on USB_HID
+ depends on HID
---help---
Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
CLLRCMCE remote control.
@@ -679,7 +679,7 @@ config THRUSTMASTER_FF

config HID_WACOM
tristate "Wacom Bluetooth devices support"
- depends on BT_HIDP
+ depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
---help---
@@ -687,7 +687,7 @@ config HID_WACOM

config HID_WIIMOTE
tristate "Nintendo Wii Remote support"
- depends on BT_HIDP
+ depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
select INPUT_FF_MEMLESS
@@ -719,7 +719,7 @@ config ZEROPLUS_FF

config HID_ZYDACRON
tristate "Zydacron remote control support"
- depends on USB_HID
+ depends on HID
---help---
Support for Zydacron remote control.

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 320a958..9e0c4fbb 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -21,7 +21,6 @@
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>

#include "hid-ids.h"

diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index f7f113b..ef89573 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -19,7 +19,6 @@
#include <linux/input/mt.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>

#include "hid-ids.h"

diff --git a/drivers/hid/hid-speedlink.c b/drivers/hid/hid-speedlink.c
index e94371a..a2f587d 100644
--- a/drivers/hid/hid-speedlink.c
+++ b/drivers/hid/hid-speedlink.c
@@ -16,10 +16,8 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
-#include <linux/usb.h>

#include "hid-ids.h"
-#include "usbhid/usbhid.h"

static const struct hid_device_id speedlink_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE)},
--
1.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Benjamin Tissoires: "[PATCH 5/7] HID: use hid_hw_wait() instead of direct call to usbhid"
Previous message: Viresh Kumar: "Re: [PATCH 0/4] CPUFreq Fixes for 3.9"
In reply to: Benjamin Tissoires: "[PATCH 0/7] hid driver transport cleanup"
Next in thread: Benjamin Tissoires: "[PATCH 5/7] HID: use hid_hw_wait() instead of direct call to usbhid"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]