Re: [PATCH v3 1/3] dmaengine: add dma_get_slave_sg_caps()

[Vinod Koul]

On Mon, Feb 04, 2013 at 02:47:02PM -0500, Matt Porter wrote:
> Add a dmaengine API to retrieve slave SG transfer capabilities.
> 
> The API is optionally implemented by dmaengine drivers and when
> unimplemented will return a NULL pointer. A client driver using
> this API provides the required dma channel, address width, and
> burst size of the transfer. dma_get_slave_sg_caps() returns an
> SG caps structure with the maximum number and size of SG segments
> that the given channel can handle.
Okay this sounds much better :-)

few points though:
- you added API for caps, but is actually calculating for given configuration
  the max allowed range. IMHO that is not caps, perhaps renaming to get_max_sg
  /some_better_name would be more apt.
- Still I like the idea of caps, but it should give H/W support capablity. If
  you want to add that, pls develop on same line...

--
~Vinod

> 
> Signed-off-by: Matt Porter <mporter@xxxxxx>
> ---
>  include/linux/dmaengine.h |   40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> index d3201e4..5b5b220 100644
> --- a/include/linux/dmaengine.h
> +++ b/include/linux/dmaengine.h
> @@ -371,6 +371,19 @@ struct dma_slave_config {
>  	unsigned int slave_id;
>  };
>  
> +/* struct dma_slave_sg_caps - expose SG transfer capability of a
> + * channel.
> + *
> + * @max_seg_nr: maximum number of SG segments supported on a SG/SLAVE
> + *	    channel (0 for no maximum or not a SG/SLAVE channel)
> + * @max_seg_len: maximum length of SG segments supported on a SG/SLAVE
> + *	     channel (0 for no maximum or not a SG/SLAVE channel)
> + */
> +struct dma_slave_sg_caps {
> +	u32 max_seg_nr;
> +	u32 max_seg_len;
> +};
> +
>  static inline const char *dma_chan_name(struct dma_chan *chan)
>  {
>  	return dev_name(&chan->dev->device);
> @@ -534,6 +547,7 @@ struct dma_tx_state {
>   *	struct with auxiliary transfer status information, otherwise the call
>   *	will just return a simple status code
>   * @device_issue_pending: push pending transactions to hardware
> + * @device_slave_sg_caps: return the slave SG capabilities
>   */
>  struct dma_device {
>  
> @@ -602,6 +616,9 @@ struct dma_device {
>  					    dma_cookie_t cookie,
>  					    struct dma_tx_state *txstate);
>  	void (*device_issue_pending)(struct dma_chan *chan);
> +	struct dma_slave_sg_caps *(*device_slave_sg_caps)(
> +		struct dma_chan *chan, enum dma_slave_buswidth addr_width,
> +		u32 maxburst);
>  };
>  
>  static inline int dmaengine_device_control(struct dma_chan *chan,
> @@ -969,6 +986,29 @@ dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used,
>  	}
>  }
>  
> +/**
> + * dma_get_slave_sg_caps - get DMAC SG transfer capabilities
> + * @chan: target DMA channel
> + * @addr_width: address width of the DMA transfer
> + * @maxburst: maximum DMA transfer burst size
> + *
> + * Get SG transfer capabilities for a specified channel. If the dmaengine
> + * driver does not implement SG transfer capabilities then NULL is
> + * returned.
> + */
> +static inline struct dma_slave_sg_caps
> +*dma_get_slave_sg_caps(struct dma_chan *chan,
> +		       enum dma_slave_buswidth addr_width,
> +		       u32 maxburst)
> +{
> +	if (chan->device->device_slave_sg_caps)
> +		return chan->device->device_slave_sg_caps(chan,
> +							  addr_width,
> +							  maxburst);
> +
> +	return NULL;
> +}
> +
>  enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
>  #ifdef CONFIG_DMA_ENGINE
>  enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/