Re: [PATCH v2 0/5] Generic PHY Framework
From: Marc Kleine-Budde
Date: Tue Feb 19 2013 - 11:07:53 EST
On 02/19/2013 04:05 PM, Felipe Balbi wrote:
> On Tue, Feb 19, 2013 at 02:34:40PM +0000, Arnd Bergmann wrote:
>> On Tuesday 19 February 2013, Felipe Balbi wrote:
>>> On Tue, Feb 19, 2013 at 12:33:54PM +0000, Arnd Bergmann wrote:
>>>>> Currently drivers/phy and drivers/net/phy are independent and are not
>>>>> related to each other. There are some fundamental differences on how
>>>>> these frameworks work. IIUC, the *net* uses bus layer (MDIO bus) to
>>>>> match a PHY device with a PHY driver and the Ethernet device uses the
>>>>> bus layer to get the PHY.
>>>>> The Generic PHY Framework however doesn't have any bus layer. The PHY
>>>>> should be like any other Platform Devices and Drivers and the framework
>>>>> will provide some APIs to register with the framework. And there are
>>>>> other APIs which any controller can use to get the PHY (for e.g., in the
>>>>> case of dt boot, it can use phandle to get a reference to the PHY).
>>>> Hmm, I think the use of a bus_type for a PHY actually sounds quite
>>>> appropriate. The actual PHY device would then be a child of the
>>> really ? I'm not so sure, the *bus* used by the PHY is ULPI, UTMI,
>>> UTMI+, PIP3, I2C, etc... adding another 'fake' bus representation is a
>>> bit overkill IMO.
>>> Imagine an I2C-controlled PHY driver like isp1301, that driver will have
>>> to register i2c_driver and phy_driver, which looks weird to me. If the
>>> only substitute for class is a bus, we can't drop classes just yet, I'm
>>> Imagine a regulator bus, a pwm bus, an LED bus etc. They don't make
>>> sense IMHO.
>> It's a fine line, but I think a phy is something that resembles a device
>> more than an LED does. When I read patch 1, I also noticed and commented
>> on the fact that it does use a 'class'. Now, according to Greg, we should
>> use 'bus_type' instead of 'class' in new code. I originally disagreed with
>> that concept, but he's the boss here and it's good if he has a vision
>> how things should be lined out.
>> In practice, there is little difference between a 'bus_type' and a 'class',
>> so just replace any instance of the former with the latter in your head
>> when reading the code ;-)
> it's not so simple :-) if we must use bus_type we need to introduce all
> the device/driver matching mechanism which isn't necessary with a class.
You have the code for phy <-> device matching in your framework anyway.
Using the bus infrastructure brings changes the open coded matching into
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Description: OpenPGP digital signature