On Wed, 2013-02-20 at 13:31 +1100, Alexey Kardashevskiy wrote:On 20/02/13 07:11, Alex Williamson wrote:On Tue, 2013-02-19 at 18:38 +1100, David Gibson wrote:On Mon, Feb 18, 2013 at 10:24:00PM -0700, Alex Williamson wrote:On Mon, 2013-02-18 at 17:15 +1100, Alexey Kardashevskiy wrote:On 13/02/13 04:15, Alex Williamson wrote:On Wed, 2013-02-13 at 01:42 +1100, Alexey Kardashevskiy wrote:On 12/02/13 16:07, Alex Williamson wrote:On Tue, 2013-02-12 at 15:06 +1100, Alexey Kardashevskiy wrote:Having this patch in a tree, adding new nodes in sysfs
for IOMMU groups is going to be easier.
The first candidate for this change is a "dma-window-size"
property which tells a size of a DMA window of the specific
IOMMU group which can be used later for locked pages accounting.
I'm still churning on this one; I'm nervous this would basically creat
a /proc free-for-all under /sys/kernel/iommu_group/$GROUP/ where any
iommu driver can add random attributes. That can get ugly for
Is not it exactly what sysfs is for (unlike /proc)? :)
Um, I hope it's a little more thought out than /proc.
On the other hand, for the application of userspace knowing how much
memory to lock for vfio use of a group, it's an appealing location to
get that information. Something like libvirt would already be poking
around here to figure out which devices to bind. Page limits need to be
setup prior to use through vfio, so sysfs is more convenient than
through vfio ioctls.
True. DMA window properties do not change since boot so sysfs is the right
place to expose them.
But then is dma-window-size just a vfio requirement leaking over into
iommu groups? Can we allow iommu driver based attributes without giving
up control of the namespace? Thanks,
Who are you asking these questions? :)
Anyone, including you. Rather than dropping misc files in sysfs to
describe things about the group, I think the better solution in your
case might be a link from the group to an existing sysfs directory
describing the PE. I believe your PE is rooted in a PCI bridge, so that
presumably already has a representation in sysfs. Can the aperture size
be determined from something in sysfs for that bridge already? I'm just
not ready to create a grab bag of sysfs entries for a group yet.
At the moment there is no information neither in sysfs nor
/proc/device-tree about the dma-window. And adding a sysfs entry per PE
(powerpc partitionable end-point which is often a PHB but not always) just
for VFIO is quite heavy.
How do you learn the window size and PE extents in the host kernel?
We could add a ppc64 subfolder under /sys/kernel/iommu/xxx/ and put the
"dma-window" property there. And replace it with a symlink when and if we
add something for PE later. Would work?
Fwiw, I'd suggest a subfolder named for the type of IOMMU, rather than
To be clear, you're suggesting /sys/kernel/iommu_groups/$GROUP/xxx/,
right? A subfolder really only limits the scope of the mess, so it's
not much improvement. What does the interface look like to make those
The problem we're trying to solve is this call flow:
containerfd = open("/dev/vfio/vfio");
ioctl(containerfd, VFIO_CHECK_EXTENSION, ...);
groupfd = open("/dev/vfio/$GROUP");
ioctl(groupfd, VFIO_GROUP_SET_CONTAINER, &containerfd);
You wanted to lock all the memory for the DMA window here, before we can
call VFIO_IOMMU_GET_INFO, but does it need to happen there? We still
have a MAP_DMA hook. We could do it all on the first mapping.
MAP_DMA isn't quite enough, since the guest can also directly cause
mappings using hypercalls directly implemented in KVM. I think it
would be feasible to lock on the first mapping (either via MAP_DMA, or
H_PUT_TCE) though it would be a bit ugly and require that the first
H_PUT_TCE always bounce out to virtual mode (Alexey, correct me if I'm
wrong here). IIRC there is also a call to bind the vfio container to
a (qemu assigned) LIOBN, before the guest can use H_PUT_TCE directly,
so that might be another place we could do the lock.
Somehow hypercall mappings have to be gated by the userspace setup,
There is a KVM ioctl (and a KVM capability) which hooks LIOBN (PCI bus ID)
with IOMMU ID. It basically creates an entry in the list of all LIOBNs and
when TCE call occurs, the host finds correct IOMMU group to pass this call to.
It happens from spapr_register_vfio_container() in QEMU, i.e. after getting
DMA window properties but only if the host supports real mode TCE handling.
has a flags field that could augment the behavior to trigger page
I don't see how the flags help us - we can't have userspace choose to
skip the locked memory accounting. Or are you suggesting a flag to
open the container in some sort of dummy mode where only GET_INFO is
possible, then re-open with the full locking?
Sort of, I don't think it needs to be re-opened, but we had previously
talked about some kind of enable and disable ioctl. "enable" would be
the logical place to lock pages, but then we probably got stuck in
questions around what it means to enable an iommu generically.
The other question is if a container is ready to work if I add just one
group? What happens when I add another one (not supported on ppc64 but
This is also the problem with exposing a dma window under the group in
sysfs. Do I require the ability to lock the sum of the window, the
largest window, what? If we rely on the ioctls, userspace can figure
out that they can't be combined and know it's the sum. I'm not sure
what your plans are around hotplug of a PHB though.
Having "enable" method and disabling new attachments when it is
"enabled" would keep my brain calm :)
Now I'm not sure whether you're for or against it ;)
if instead of a separate enable ioctl we had a flag on DMA_MAP that was
defined as SET_WINDOW where iova and size are passed and specify the
portion of the DMA window that userspace intends to use and which is
therefore locked. If you don't support subwindows, fine, just fail it.
You could have a matching PUT_WINDOW on DMA_UNMAP if you wanted.
DMA_MAP which does not do "map" but does "lock" or "set window"?
enable()/disable() look better.
Sure, this is why we have a modular iommu interface, spapr can create an
enable ioctl if necessary. I think there are ways to use the
DMA_MAP/UNMAP ioctl in ways that aren't a complete kludge though.
Adding the window size to sysfs seems more readily convenient,
but is it so hard for userspace to open the files and call a couple
ioctls to get far enough to call IOMMU_GET_INFO? I'm unconvinced the
clutter in sysfs more than just a quick fix. Thanks,
And finally, as Alexey points out, isn't the point here so we know how
much rlimit to give qemu? Using ioctls we'd need a special tool just
to check the dma window sizes, which seems a bit hideous.
Is it more hideous that using iommu groups to report a vfio imposed
restriction? Are a couple open files and a handful of ioctls worse than
code to parse directory entries and the future maintenance of an
unrestricted grab bag of sysfs entries?
At the moment DMA32 window properties are static. So I can easily get rid
of VFIO_IOMMU_SPAPR_TCE_GET_INFO and be happy.
Like, for instance, every PE always gets 512MB DMA window, fixed base
address, not configurable, end of story?
Ah, anyway, how do you see these ioctls to work on a user machine?
A separate tool which takes an iommu id, returns DMA window size and
Sure, we need something that provides the function of libvirt and
unbinds devices from host drivers, re-binds them to vfio-pci. That tool
needs to have permissions to manipulate groups, so we're just talking
about whether it's stepping over the line for it to open the group and a
container, associate them, and probe the iommu info vs reading a sysfs