[GIT PULL 3/3] arm-soc: mvebu platform changes (not rebased)

From: Olof Johansson
Date: Thu Feb 28 2013 - 17:55:44 EST


This series contains changes for the Marvell EBU platforms (mvebu,
orion, kirkwood, dove) that were not part of the first set of pull
requests because of dependencies on the MMC tree, and being submitted
a little late.

Notable changes are:

* More devices get moved out of board files into device tree
descriptions. The remaining devices listed in there have patches
that will get sent for 3.10, after which we can remove a lot of the
board files entirely. We are doing the pinctrl and mmc drivers here,
ethernet and PCI still remain.

* SMP support for mvebu is improved with support for the
local interrupt controller.

* The Guruplug board file gets replaced with a DT description.


----------------------------------------------------------------

The following changes since commit 280c50ec3b6e801b59311823fcd7d9c679354b6a:

Merge tag 'late-omap' into HEAD

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/late-mvebu

for you to fetch changes up to 0ed30f3e6550706830959c6657c3f229334c9ccd:

Merge commit 'mmc-fsckup-merge' into late/mvebu

----------------------------------------------------------------

Andrew Lunn (7):
ARM: Kirkwood: Remove redundent USB clock alias
ARM: Kirkwood: Remove redundent SDIO clock alias
ARM: Kirkwood: Convert NSA310 to DT based regulators.
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
ARM: Kirkwood: Convert NSA310 I2C to device tree
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
ARM: Kirkwood: topkick: Enable i2c bus.

Andy Shevchenko (1):
mmc: sdhci: introduce sdhci_update_clock helper to re-enable clock

Arnd Bergmann (7):
Merge branch 'mvebu/boards' into late/mvebu
Merge tag 'boards_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux into late/mvebu
Merge tag 'boards_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux into late/mvebu
Merge tag 'dt_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux into late/mvebu-dt
Merge commit 'upstream/mmc'; branch 'depends/mmc' into late/mvebu2
Merge branch 'late/mvebu-dt' into late/mvebu
Merge commit 'mmc-fsckup-merge' into late/mvebu

Chris Ball (1):
mmc: mvsdio: add pinctrl integration

Ezequiel Garcia (7):
arm: mvebu: Update defconfig to select USB support
arm: mvebu: Add support for USB host controllers in Armada 370/XP
arm: mvebu: Enable USB controllers on Armada 370/XP boards
ARM: mvebu: Update defconfig to select SPI support
ARM: mvebu: Update defconfig to select SPI flash and MTD support
arm: mvebu: Add support for SPI controller in Armada 370/XP
arm: mvebu: Add SPI flash on Armada XP-GP board

Florian Fainelli (2):
arm: mvebu: add DTS file for Marvell RD-A370-A1 board
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board

Gregory CLEMENT (12):
arm: mvebu: Update defconfig with Marvell RTC support
arm: mvebu: Improve the SMP support of the interrupt controller
arm: mvebu: Add RTC support for Armada 370 and Armada XP
arm: mvebu: Add support for local interrupt
clocksource: time-armada-370-xp: add local timer support
arm: mvebu: update defconfig with local timer support
arm: mvebu: update DT to support local timers
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP)
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: update defconfig with ATAG support when using DT

Guennadi Liakhovetski (7):
mmc: sh-mmcif: fix missing and consolidate IO completion timeouts
mmc: sh-mmcif: (cosmetic) simplify boolean return blocks
mmc: sh-mmcif: fix a race, causing an Oops on SMP
mmc: sh-mmcif: reset error code for any opcode
mmc: sh-mmcif: reset DMA completion immediately before starting DMA
mmc: sh-mmcif: fix I/O errors
mmc: sh-mmcif: simplify IRQ processing

Jason Cooper (11):
Merge tag 'tags/mvebu_fixes_for_v3.8-rc6' into mvebu/boards
Merge tag 'tags/cleanup_for_v3.9_round2' into mvebu/boards
Merge tag 'tags/drivers_for_v3.9' into mvebu/boards
Merge commit 'd293875' into mvebu/boards
Merge tag 'tags/boards_for_v3.9' into mvebu/dt
Merge branch 'mvebu/boards' into mvebu/dt
Merge branch 'mvebu/boards' into mvebu/dt
ARM: kirkwood: topkick: convert to pinctrl
ARM: kirkwood: nsa310: convert to pinctrl
ARM: kirkwood: topkick: init mvsdio via DT
Merge remote-tracking branch 'arm-soc/timer/cleanup' into mvebu/boards

Kevin Liu (3):
mmc: sdhci: disable interrupt before free_irq
mmc: sdhci: add IRQ wake up support
mmc: sdhci-pxav3: add IRQ wake up support

Konstantin Dorfman (1):
mmc: fix async request mechanism for sequential read scenarios

Nobuhiro Iwamatsu (3):
ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282
ARM: Kirkwood: Add pinctrl of NAND to 88f6282
ARM: Kirkwood: Convert openblocks A6 board to pinctrl

Olof Johansson (1):
ARM: dove: update dove_defconfig with a few useful options

Sebastian Hesselbarth (5):
ARM: Dove: split legacy and DT setup
ARM: Dove: move CuBox led pinctrl to gpio-leds node
ARM: Dove: add fixed regulator for CuBox USB power
ARM: Dove: convert usb host controller to DT
ARM: dove: convert serial DT nodes to clocks property

Seungwon Jeon (1):
mmc: queue: exclude asynchronous transfer for special request

Shawn Guo (5):
mmc: sdhci: query card presence from cd-gpio before asking SDHCI
mmc: slot-gpio: use devm_* managed functions to ease users
mmc: remove unncessary mmc_gpio_free_cd() call from slot-gpio users
mmc: sdhci-esdhc-imx: use slot-gpio helpers for CD and WP
mmc: sdhci-esdhc-imx: remove ESDHC_CD_GPIO handling from IO accessory

Shinya Kuribayashi (1):
mmc: sh_mmcif: add support for bundled MMCIF IRQs

Stephen Warren (1):
mmc: add BCM2835 driver

Subhash Jadavani (2):
mmc: sdio: fix resume failure due to lack of CMD52 reset
mmc: sdio: print correct UHS mode during card detection

Sujit Reddy Thumma (1):
mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequence

Teppei Kamijou (7):
mmc: sh_mmcif: force to fail CMD52 immediately
mmc: sh_mmcif: ensure run-time suspend call is processed before suspend
mmc: sh_mmcif: Add support for eMMC Dual Data Rate
mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout
mmc: sh_mmcif: Avoid unnecessary mmc_delay() at mmc_card_sleepawake()
mmc: sh-mmcif: Terminate DMA transactions when detecting timeout or error
mmc: sh-mmcif: report all errors

Thomas Petazzoni (18):
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable btmrvl driver in mvebu_defconfig
arm: mvebu: add LEDs support to defconfig file
arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
arm: mvebu: enable the SD card slot on Armada XP DB board
arm: mvebu: enable the SD card slot on Armada 370 DB board
arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
arm: kirkwood: add Device Tree informations for the SDIO controller
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
arm: kirkwood: add pinmux option for the SDIO interface on 88F6282
arm: mvebu: add button for OpenBlocks AX3-4

Willy Tarreau (1):
ARM: kirkwood: convert Guruplug Server Plus to use the device tree


.../marvell,armada-370-xp-timer.txt} | 11 +-
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/armada-370-db.dts | 35 +++++
arch/arm/boot/dts/armada-370-mirabox.dts | 18 +++
arch/arm/boot/dts/armada-370-rd.dts | 68 +++++++++
arch/arm/boot/dts/armada-370-xp.dtsi | 49 +++++-
arch/arm/boot/dts/armada-370.dtsi | 21 +++
arch/arm/boot/dts/armada-xp-db.dts | 31 ++++
arch/arm/boot/dts/armada-xp-gp.dts | 113 ++++++++++++++
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 6 +
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 +
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 +
.../arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +++
arch/arm/boot/dts/armada-xp.dtsi | 19 ++-
arch/arm/boot/dts/dove-cubox.dts | 28 +++-
arch/arm/boot/dts/dove.dtsi | 24 ++-
arch/arm/boot/dts/kirkwood-6282.dtsi | 17 +++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 7 +
.../boot/dts/kirkwood-guruplug-server-plus.dts | 94 ++++++++++++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +-
arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 6 +
arch/arm/boot/dts/kirkwood-nsa310.dts | 126 ++++++++++++++++
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 116 ++++++++++++++
arch/arm/boot/dts/kirkwood-topkick.dts | 102 +++++++++++++
arch/arm/boot/dts/kirkwood.dtsi | 8 +
arch/arm/configs/dove_defconfig | 28 +---
arch/arm/configs/mvebu_defconfig | 26 +++-
arch/arm/mach-dove/Kconfig | 7 +
arch/arm/mach-dove/Makefile | 4 +-
arch/arm/mach-dove/board-dt.c | 92 ++++++++++++
arch/arm/mach-dove/common.c | 85 -----------
arch/arm/mach-kirkwood/Kconfig | 7 +
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dreamplug.c | 6 -
arch/arm/mach-kirkwood/board-dt.c | 16 +-
arch/arm/mach-kirkwood/board-guruplug.c | 39 +++++
arch/arm/mach-kirkwood/board-mplcec4.c | 7 -
arch/arm/mach-kirkwood/board-ns2.c | 14 --
arch/arm/mach-kirkwood/board-nsa310.c | 69 ---------
arch/arm/mach-kirkwood/board-openblocks_a6.c | 44 ------
arch/arm/mach-kirkwood/board-usi_topkick.c | 48 ------
arch/arm/mach-kirkwood/common.h | 11 +-
arch/arm/mach-mvebu/irq-armada-370-xp.c | 87 ++++++++++-
drivers/clocksource/time-armada-370-xp.c | 150 ++++++++++++++-----
44 files changed, 1314 insertions(+), 370 deletions(-)
rename Documentation/devicetree/bindings/{arm/armada-370-xp-timer.txt => timer/marvell,armada-370-xp-timer.txt} (55%)
create mode 100644 arch/arm/boot/dts/armada-370-rd.dts
create mode 100644 arch/arm/boot/dts/armada-xp-gp.dts
create mode 100644 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
create mode 100644 arch/arm/mach-dove/board-dt.c
create mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/