[RESEND 0/2] davinci: Add device tree data for tps6507x.

From: Vishwanathrao Badarkhe, Manish
Date: Thu Mar 07 2013 - 01:25:15 EST


Add device tree data for regulator via tps6507x mfd device
in da850-evm.
Applies on top of v3.9-rc1 of linus tree.

Tested on da850-evm device.

Test procedure followed as below:
Once device boots up, issue command as:

$for reg in /sys/class/regulator/*; do echo $reg `cat $reg/name`
`cat $reg/state` `cat $reg/microvolts`; done

This command will print all available regulators with its name,
status (enabled/disabled) and voltages(in microvolts) like as below:
/sys/class/regulator/regulator.1 VDCDC1_3.3V enabled 3300000
/sys/class/regulator/regulator.2 VDCDC2_3.3V enabled 3300000
/sys/class/regulator/regulator.3 VDCDC3_1.2V enabled 1200000
/sys/class/regulator/regulator.4 LDO1_1.8V enabled 1800000
/sys/class/regulator/regulator.5 LDO2_1.2V enabled 1200000

Note: Some of patches in this series are already accepted and
residing in v3.9-rc1 kernel. These patches are as follows:

1. mfd: tps6507x: add device-tree support.
2. regulator: tps6507x: add device tree support.
3. ARM: davinci: da850: add DT node for I2C0.

Vishwanathrao Badarkhe, Manish (2):
ARM: regulator: add tps6507x device tree data
ARM: davinci: da850: add tps6507x regulator DT data

arch/arm/boot/dts/da850-evm.dts | 63 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tps6507x.dtsi | 47 +++++++++++++++++++++++++++++
2 files changed, 110 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/tps6507x.dtsi

--
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/