commit 2cfda637e29ce9e3df31b59f64516b2e571cc985 Author: Yinghai Lu Date: Mon Apr 1 11:48:59 2013 -0600 EISA/PCI: Fix bus res reference Matthew found that 3.8.3 is having problems with an old (ancient) PCI-to-EISA bridge, the Intel 82375. It worked with the 3.2 kernel. He identified the 82375, but doesn't assign the struct resource *res pointer inside the struct eisa_root_device, and panics. pci_eisa_init() was using bus->resource[] directly instead of pci_bus_resource_n(). The bus->resource[] array is a PCI-internal implementation detail, and after commit 45ca9e97 (PCI: add helpers for building PCI bus resource lists) and commit 0efd5aab (PCI: add struct pci_host_bridge_window with CPU/bus address offset), bus->resource[] is not used for PCI root buses any more. The 82375 is a subtractive-decode PCI device, so handle it the same way we handle PCI-PCI bridges in subtractive-decode mode in pci_read_bridge_bases(). [bhelgaas: changelog] Reported-by: Matthew Whitehead Tested-by: Matthew Whitehead Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # v3.3+ diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index cdae207..ef5c3ec 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -22,7 +22,8 @@ static struct eisa_root_device pci_eisa_root; static int __init pci_eisa_init(struct pci_dev *pdev, const struct pci_device_id *ent) { - int rc; + int rc, i; + struct resource *res, *bus_res = NULL; if ((rc = pci_enable_device (pdev))) { printk (KERN_ERR "pci_eisa : Could not enable device %s\n", @@ -30,9 +31,30 @@ static int __init pci_eisa_init(struct pci_dev *pdev, return rc; } + /* + * The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI + * device, so the resources available on EISA are the same as those + * available on the 82375 bus. This works the same as a PCI-PCI + * bridge in subtractive-decode mode (see pci_read_bridge_bases()). + * We assume other PCI-EISA bridges are similar. + * + * eisa_root_register() can only deal with a single io port resource, + * so we use the first valid io port resource. + */ + pci_bus_for_each_resource(pdev->bus, res, i) + if (res && (res->flags & IORESOURCE_IO)) { + bus_res = res; + break; + } + + if (!bus_res) { + dev_err(&pdev->dev, "No resources available\n"); + return -1; + } + pci_eisa_root.dev = &pdev->dev; - pci_eisa_root.res = pdev->bus->resource[0]; - pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start; + pci_eisa_root.res = bus_res; + pci_eisa_root.bus_base_addr = bus_res->start; pci_eisa_root.slots = EISA_MAX_SLOTS; pci_eisa_root.dma_mask = pdev->dma_mask; dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root); commit c5fb301ae83bec6892e54984e6ec765c47df8e10 Author: Yinghai Lu Date: Wed Mar 27 21:28:05 2013 -0700 EISA/PCI: Init EISA early, before PNP Matthew reported kernels fail the pci_eisa probe and are later successful with the virtual_eisa_root_init force probe without slot0. The reason for that is: PNP probing is before pci_eisa_init gets called as pci_eisa_init is called via pci_driver. pnp 00:0f has 0xc80 - 0xc84 reserved. [ 9.700409] pnp 00:0f: [io 0x0c80-0x0c84] so eisa_probe will fail from pci_eisa_init ==>eisa_root_register ==>eisa_probe path. as force_probe is not set in pci_eisa_root, it will bail early when slot0 is not probed and initialized. Try to use subsys_initcall_sync instead, and will keep following sequence: pci_subsys_init pci_eisa_init_early pnpacpi_init/isapnp_init After this patch EISA can be initialized properly, and PNP overlapping resource will not be reserved. [ 10.104434] system 00:0f: [io 0x0c80-0x0c84] could not be reserved Reported-by: Matthew Whitehead Tested-by: Matthew Whitehead Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index ef5c3ec..6c3fca9 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -19,8 +19,7 @@ /* There is only *one* pci_eisa device per machine, right ? */ static struct eisa_root_device pci_eisa_root; -static int __init pci_eisa_init(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int __init pci_eisa_init(struct pci_dev *pdev) { int rc, i; struct resource *res, *bus_res = NULL; @@ -67,22 +66,26 @@ static int __init pci_eisa_init(struct pci_dev *pdev, return 0; } -static struct pci_device_id pci_eisa_pci_tbl[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 }, - { 0, } -}; +/* + * We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init(). + * Otherwise pnp resource will get enabled early and could prevent eisa + * to be initialized. + * Also need to make sure pci_eisa_init_early() is called after + * x86/pci_subsys_init(). + * So need to use subsys_initcall_sync with it. + */ +static int __init pci_eisa_init_early(void) +{ + struct pci_dev *dev = NULL; + int ret; -static struct pci_driver __refdata pci_eisa_driver = { - .name = "pci_eisa", - .id_table = pci_eisa_pci_tbl, - .probe = pci_eisa_init, -}; + for_each_pci_dev(dev) + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) { + ret = pci_eisa_init(dev); + if (ret) + return ret; + } -static int __init pci_eisa_init_module (void) -{ - return pci_register_driver (&pci_eisa_driver); + return 0; } - -device_initcall(pci_eisa_init_module); -MODULE_DEVICE_TABLE(pci, pci_eisa_pci_tbl); +subsys_initcall_sync(pci_eisa_init_early); commit d0e36df69863bfa054a4703406a737b0476e68e8 Author: Bjorn Helgaas Date: Mon Apr 1 14:16:56 2013 -0600 EISA: Use dev_printk() when possible Use dev_printk() when possible to make messages more useful. Signed-off-by: Bjorn Helgaas diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c index 806c77b..0b06df4 100644 --- a/drivers/eisa/eisa-bus.c +++ b/drivers/eisa/eisa-bus.c @@ -314,22 +314,22 @@ static int __init eisa_probe(struct eisa_root_device *root) { int i, c; struct eisa_device *edev; + char *enabled_str; - printk(KERN_INFO "EISA: Probing bus %d at %s\n", - root->bus_nr, dev_name(root->dev)); + dev_info(root->dev, "Probing EISA bus %d\n", root->bus_nr); /* First try to get hold of slot 0. If there is no device * here, simply fail, unless root->force_probe is set. */ edev = kzalloc(sizeof(*edev), GFP_KERNEL); if (!edev) { - printk(KERN_ERR "EISA: Couldn't allocate mainboard slot\n"); + dev_err(root->dev, "EISA: Couldn't allocate mainboard slot\n"); return -ENOMEM; } if (eisa_request_resources(root, edev, 0)) { - printk(KERN_WARNING \ - "EISA: Cannot allocate resource for mainboard\n"); + dev_warn(root->dev, + "EISA: Cannot allocate resource for mainboard\n"); kfree(edev); if (!root->force_probe) return -EBUSY; @@ -344,11 +344,11 @@ static int __init eisa_probe(struct eisa_root_device *root) goto force_probe; } - printk(KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig); + dev_info(&edev->dev, "EISA: Mainboard %s detected\n", edev->id.sig); if (eisa_register_device(edev)) { - printk(KERN_ERR "EISA: Failed to register %s\n", - edev->id.sig); + dev_err(&edev->dev, "EISA: Failed to register %s\n", + edev->id.sig); eisa_release_resources(edev); kfree(edev); } @@ -358,14 +358,15 @@ static int __init eisa_probe(struct eisa_root_device *root) for (c = 0, i = 1; i <= root->slots; i++) { edev = kzalloc(sizeof(*edev), GFP_KERNEL); if (!edev) { - printk(KERN_ERR "EISA: Out of memory for slot %d\n", i); + dev_err(root->dev, "EISA: Out of memory for slot %d\n", + i); continue; } if (eisa_request_resources(root, edev, i)) { - printk(KERN_WARNING \ - "Cannot allocate resource for EISA slot %d\n", - i); + dev_warn(root->dev, + "Cannot allocate resource for EISA slot %d\n", + i); kfree(edev); continue; } @@ -375,38 +376,30 @@ static int __init eisa_probe(struct eisa_root_device *root) kfree(edev); continue; } - - printk(KERN_INFO "EISA: slot %d : %s detected", - i, edev->id.sig); - - switch (edev->state) { - case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED: - printk(" (forced enabled)"); - break; - - case EISA_CONFIG_FORCED: - printk(" (forced disabled)"); - break; - - case 0: - printk(" (disabled)"); - break; - } - - printk (".\n"); + + if (edev->state == (EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED)) + enabled_str = " (forced enabled)"; + else if (edev->state == EISA_CONFIG_FORCED) + enabled_str = " (forced disabled)"; + else if (edev->state == 0) + enabled_str = " (disabled)"; + else + enabled_str = ""; + + dev_info(&edev->dev, "EISA: slot %d: %s detected%s\n", i, + edev->id.sig, enabled_str); c++; if (eisa_register_device(edev)) { - printk(KERN_ERR "EISA: Failed to register %s\n", - edev->id.sig); + dev_err(&edev->dev, "EISA: Failed to register %s\n", + edev->id.sig); eisa_release_resources(edev); kfree(edev); } } - printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s"); - + dev_info(root->dev, "EISA: Detected %d card%s\n", c, c == 1 ? "" : "s"); return 0; } diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index 6c3fca9..a333bf3 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -25,8 +25,7 @@ static int __init pci_eisa_init(struct pci_dev *pdev) struct resource *res, *bus_res = NULL; if ((rc = pci_enable_device (pdev))) { - printk (KERN_ERR "pci_eisa : Could not enable device %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Could not enable device\n"); return rc; } @@ -59,7 +58,7 @@ static int __init pci_eisa_init(struct pci_dev *pdev) dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root); if (eisa_root_register (&pci_eisa_root)) { - printk (KERN_ERR "pci_eisa : Could not register EISA root\n"); + dev_err(&pdev->dev, "Could not register EISA root\n"); return -1; } commit 3a94edb7ba59d3ca30a3a54d8de628f1ccf004e4 Author: Bjorn Helgaas Date: Mon Apr 1 14:40:05 2013 -0600 EISA: Log device resources in dmesg Note the resources consumed by EISA devices in dmesg, similar to what we already do for PCI and PNP devices. Signed-off-by: Bjorn Helgaas diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c index 0b06df4..a6fbf98 100644 --- a/drivers/eisa/eisa-bus.c +++ b/drivers/eisa/eisa-bus.c @@ -288,6 +288,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root, edev->res[i].flags = IORESOURCE_BUSY; } + dev_printk(KERN_DEBUG, &edev->dev, "%pR\n", &edev->res[i]); if (request_resource(root->res, &edev->res[i])) goto failed; }