[NEW DRIVER V5 7/7] drivers/regulator: DA9058 REGULATOR driver

[Anthony Olech]

This patch is relative to linux next-20130417

This is the REGULATOR component driver of the Dialog DA9058 PMIC.
This driver is just one component of the whole DA9058 PMIC driver.
It depends on the CORE component driver of the DA9058 MFD.

Changes relative to V4 of this patch:
- rebased to latest tagged linux-next - previously relative to mainline
drivers/regulator/da9058-regulator.c
- use generic regulator_set_voltage_time_sel for triggered BUCKs
- print erroneous ret value in dev_err
- changed all names with uV to uv just to confuse and upset all physicists

Signed-off-by: Anthony Olech <anthony.olech.opensource@xxxxxxxxxxx>
Signed-off-by: David Dajun Chen <david.chen@xxxxxxxxxxx>
---
 drivers/regulator/Kconfig            |   11 ++
 drivers/regulator/Makefile           |    1 +
 drivers/regulator/da9058-regulator.c |  210 ++++++++++++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/da9058-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8bb2644..0e36ef6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -64,6 +64,17 @@ config REGULATOR_USERSPACE_CONSUMER
 
 	  If unsure, say no.
 
+config REGULATOR_DA9058
+	tristate "Support regulators on Dialog Semiconductor DA9058 PMIC"
+	depends on MFD_DA9058
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9058 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9058-regulator.
+
+
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
 	depends on GPIOLIB
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 47a34ff..d3a1dc4 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
+obj-$(CONFIG_REGULATOR_DA9058) += da9058-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
diff --git a/drivers/regulator/da9058-regulator.c b/drivers/regulator/da9058-regulator.c
new file mode 100644
index 0000000..fcd2f8a
--- /dev/null
+++ b/drivers/regulator/da9058-regulator.c
@@ -0,0 +1,210 @@
+/*
+ *  Copyright (C) 2012 Dialog Semiconductor Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/da9058/version.h>
+#include <linux/mfd/da9058/registers.h>
+#include <linux/mfd/da9058/core.h>
+#include <linux/mfd/da9058/regulator.h>
+
+struct da9058_regulator {
+	struct da9058 *da9058;
+	int ramp_register;
+	int ramp_enable_mask;
+	struct platform_device *pdev;
+	struct regulator_dev *reg_dev;
+	struct regulator_desc desc;
+	struct regulator_init_data init;
+};
+
+static struct regulator_ops da9058_buck_regulator_ops = {
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops da9058_ldo_regulator_ops = {
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int da9058_regulator_probe(struct platform_device *pdev)
+{
+	struct da9058 *da9058 = dev_get_drvdata(pdev->dev.parent);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct da9058_regulator_pdata *rpdata;
+	struct da9058_regulator *reg;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	int ret;
+	unsigned int val;
+
+	if (cell == NULL) {
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	rpdata = cell->platform_data;
+
+	if (rpdata == NULL) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (rpdata->control_register == 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (rpdata->control_enable_mask == 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	reg = devm_kzalloc(&pdev->dev, sizeof(struct da9058_regulator),
+				GFP_KERNEL);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	platform_set_drvdata(pdev, reg);
+
+	reg->da9058 = da9058;
+	reg->pdev = pdev;
+	reg->ramp_register = rpdata->ramp_register;
+	reg->ramp_enable_mask = rpdata->ramp_enable_mask;
+
+	reg->desc.name = rpdata->regulator_name;
+	reg->desc.id = rpdata->regulator_id;
+	reg->desc.type = REGULATOR_VOLTAGE;
+	reg->desc.n_voltages = 1;
+
+	if (rpdata->control_voltage_step > 0)
+		reg->desc.n_voltages += (rpdata->max_uv - rpdata->min_uv) /
+					rpdata->control_voltage_step;
+
+	reg->desc.owner = THIS_MODULE;
+	reg->desc.enable_reg = rpdata->control_register;
+	reg->desc.enable_mask = rpdata->control_enable_mask;
+
+	reg->desc.vsel_reg = rpdata->control_register;
+	reg->desc.vsel_mask = rpdata->control_step_mask;
+
+	reg->desc.min_uv = rpdata->min_uv;
+	reg->desc.uv_step = rpdata->control_voltage_step;
+
+	if (reg->ramp_register) {
+		reg->desc.apply_reg = rpdata->ramp_register;
+		reg->desc.apply_bit = rpdata->ramp_enable_mask;
+		reg->desc.ramp_delay = 1000;
+		reg->desc.ops = &da9058_buck_regulator_ops;
+	} else {
+		reg->desc.ops = &da9058_ldo_regulator_ops;
+	}
+
+	reg->init.constraints.name = rpdata->regulator_name;
+	reg->init.constraints.min_uv = rpdata->min_uv;
+	reg->init.constraints.max_uv = rpdata->max_uv;
+	reg->init.constraints.valid_ops_mask = rpdata->valid_ops_mask;
+	reg->init.constraints.valid_modes_mask = rpdata->valid_modes_mask;
+	reg->init.constraints.boot_on = rpdata->boot_on;
+	reg->init.constraints.always_on = rpdata->always_on;
+	reg->init.num_consumer_supplies = rpdata->num_consumer_supplies;
+	reg->init.consumer_supplies = rpdata->consumer_supplies;
+
+	config.dev = pdev->dev.parent;
+	config.init_data = &reg->init;
+	config.driver_data = reg;
+	config.regmap = da9058->regmap;
+
+	rdev = regulator_register(&reg->desc, &config);
+
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(&pdev->dev, "failed %d to register %s\n",
+			ret, rpdata->regulator_name);
+		goto failed_to_register;
+	}
+	reg->reg_dev = rdev;
+
+	/* before we do anything check the lock bit */
+	ret = da9058_reg_read(da9058, DA9058_SUPPLY_REG, &val);
+	if (ret)
+		goto unlock_failed;
+
+	if (val & DA9058_SUPPLY_VLOCK)
+		ret = da9058_clear_bits(da9058, DA9058_SUPPLY_REG,
+					DA9058_SUPPLY_VLOCK);
+	if (ret)
+		goto unlock_failed;
+
+	goto exit;
+
+unlock_failed:
+	regulator_unregister(rdev);
+failed_to_register:
+	platform_set_drvdata(pdev, NULL);
+exit:
+	return ret;
+}
+
+static int da9058_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+	regulator_unregister(rdev);
+
+	return 0;
+}
+
+static struct platform_driver da9058_regulator_driver = {
+	.probe = da9058_regulator_probe,
+	.remove = da9058_regulator_remove,
+	.driver = {
+		.name = "da9058-regulator",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init da9058_regulator_init(void)
+{
+	return platform_driver_register(&da9058_regulator_driver);
+}
+
+subsys_initcall(da9058_regulator_init);
+
+static void __exit da9058_regulator_exit(void)
+{
+	platform_driver_unregister(&da9058_regulator_driver);
+}
+
+module_exit(da9058_regulator_exit);
+
+MODULE_DESCRIPTION("Dialog DA9058 PMIC voltage and current regulator");
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:da9058-regulator");
-- 
end-of-patch for NEW DRIVER V5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/