[PATCH 11/32] ARM: ux500: Remove unused 'data_width' attributes from UART DMA configs

From: Lee Jones
Date: Thu Apr 18 2013 - 06:13:00 EST


DMA configuration data is now allocated in the UART driver, so these
are just ignored.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/mach-ux500/board-mop500.c | 12 ------------
1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 35fd82f..883dc66 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -530,48 +530,36 @@ static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV13_UART0,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
};

static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV13_UART0,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
};

static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV12_UART1,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
};

static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV12_UART1,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
};

static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV11_UART2,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
};

static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV11_UART2,
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
#endif

--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/