[PATCH] ACPI / resource: call acpi_get_override_irq() only for legacy IRQ resources

[Mika Westerberg]

acpi_get_override_irq() was added because there was a problem with buggy
BIOSes passing wrong IRQ() resource for the RTC IRQ. Commit that added
the workaround is 61fd47e0c8476 (ACPI: fix two IRQ8 issues in IOAPIC
mode).

With ACPI 5 enumerated devices there are typically one or more extended IRQ
resources for a device (and these IRQs can be shared). However, the
acpi_get_override_irq() workaround forces all IRQs in range 0 - 15 (the
legacy ISA IRQs) to be edge triggered, active high as can be seen from the
dmesg below:

	ACPI: IRQ 6 override to edge, high
	ACPI: IRQ 7 override to edge, high
	ACPI: IRQ 7 override to edge, high
	ACPI: IRQ 13 override to edge, high

Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows
the same thing:

	7:          4          0          0          0   IO-APIC-edge INT33C2:00, INT33C3:00

The _CSR method for INT33C2 (and INT33C3) device returns following
resource:

	Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, )
	{
		0x00000007,
	}

which states that this is supposed to be level triggered, active low,
shared IRQ instead.

Fix this by making sure that acpi_get_override_irq() gets only called when
we are dealing with legacy IRQ() or IRQNoFlags() descriptors.

While we are there correct pr_warning() to print the right triggering
value.

Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
 drivers/acpi/resource.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index a3868f6..3322b47 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -304,7 +304,8 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
 }
 
 static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
-				     u8 triggering, u8 polarity, u8 shareable)
+				     u8 triggering, u8 polarity, u8 shareable,
+				     bool legacy)
 {
 	int irq, p, t;
 
@@ -317,14 +318,19 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
 	 * In IO-APIC mode, use overrided attribute. Two reasons:
 	 * 1. BIOS bug in DSDT
 	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
+	 *
+	 * We do this only if we are dealing with IRQ() or IRQNoFlags()
+	 * resource (the legacy ISA resources). With modern ACPI 5 devices
+	 * using extended IRQ descriptors we take the IRQ configuration
+	 * from _CRS directly.
 	 */
-	if (!acpi_get_override_irq(gsi, &t, &p)) {
+	if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
 		u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
 		u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
 
 		if (triggering != trig || polarity != pol) {
 			pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
-				   t ? "edge" : "level", p ? "low" : "high");
+				   t ? "level" : "edge", p ? "low" : "high");
 			triggering = trig;
 			polarity = pol;
 		}
@@ -373,7 +379,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 		}
 		acpi_dev_get_irqresource(res, irq->interrupts[index],
 					 irq->triggering, irq->polarity,
-					 irq->sharable);
+					 irq->sharable, true);
 		break;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		ext_irq = &ares->data.extended_irq;
@@ -383,7 +389,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 		}
 		acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
 					 ext_irq->triggering, ext_irq->polarity,
-					 ext_irq->sharable);
+					 ext_irq->sharable, false);
 		break;
 	default:
 		return false;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/