Re: [PATCH v3 6/7] ARM: kirkwood: add gigabit ethernet and mvmdiodevice tree nodes

[Sebastian Hesselbarth]

On 05/20/2013 11:27 PM, Simon Baatz wrote:
> Hi Sebastian,
>
> On Mon, May 06, 2013 at 05:33:39PM +0200, Sebastian Hesselbarth wrote:
> > This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled
> > Kirkwood boards. Phy nodes are also added with reg property set on a
> > per-board basis.
> ...
> > diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> > index fada7e6..c01a273 100644
> > --- a/arch/arm/boot/dts/kirkwood.dtsi
> > +++ b/arch/arm/boot/dts/kirkwood.dtsi
> > @@ -202,5 +202,57 @@
> >   			clocks =<&gate_clk 4>;
> >   			status = "disabled";
> >   		};
> > +
> > +		mdio: mdio-bus@72004 {
> > +			compatible = "marvell,orion-mdio";
> > +			reg =<0x72004 0x84>;
> > +			interrupts =<11>;
>
> Shouldn't this be 46?

Yes, mdio is using GbE0Err interrupt and that is 14 on IRQ HIGH CAUSE.
I was misled by 11 on IRQ LOW CAUSE.

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/