Re: [PATCH 2/6] ARM: dts: imx6q{dl}: fix the pin conflict betweenSPI and WEIM

[Shawn Guo]

On Mon, May 20, 2013 at 04:48:58PM +0800, Huang Shijie wrote:
> In the imx6q-sabreauto and imx6dl-sabreauto boards,
> the pin MX6Q{DL}_PAD_EIM_D19 is used as a GPIO for SPI NOR, but
> it is used as a data pin for the WEIM NOR.
> 
> In order to fix the conflict, this patch removes the pin from the hog,
> and adds a new pinctrl item: pinctrl_ecspi1_2.
> 
> The SPI NOR selects this pinctrl_ecspi1_2 when it is enabled.
> 
> Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx6dl-sabreauto.dts   |    9 ++++++++-
>  arch/arm/boot/dts/imx6q-sabreauto.dts    |    9 ++++++++-
>  arch/arm/boot/dts/imx6qdl-sabreauto.dtsi |    2 +-
>  3 files changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
> index 60f3038..7695f70 100644
> --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
> @@ -25,7 +25,14 @@
>  			fsl,pins = <
>  				MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
>  				MX6DL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
> -				MX6DL_PAD_EIM_D19__GPIO3_IO19 	0x80000000
> +			>;
> +		};
> +	};
> +
> +	ecspi1 {
> +		pinctrl_ecspi1_2: ecspi1grp-2 {

The naming sounds like another ecspi1 pin groups beside
pinctrl_ecspi1_1, both of which should be ecspi1 pin groups defined by
SoC.  Please encode the board name in there to suggest this is a board
specific pin setup for ecspi1, something like pinctrl_ecspi1_sabreauto.

Shawn

> +			fsl,pins = <
> +				MX6DL_PAD_EIM_D19__GPIO3_IO19  0x80000000
>  			>;
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
> index 9fb3e99..67a3a6b 100644
> --- a/arch/arm/boot/dts/imx6q-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
> @@ -29,7 +29,14 @@
>  			fsl,pins = <
>  				MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
>  				MX6Q_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
> -				MX6Q_PAD_EIM_D19__GPIO3_IO19   0x80000000
> +			>;
> +		};
> +	};
> +
> +	ecspi1 {
> +		pinctrl_ecspi1_2: ecspi1grp-2 {
> +			fsl,pins = <
> +				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
>  			>;
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index d6baa51..eb293f5 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -20,7 +20,7 @@
>  	fsl,spi-num-chipselects = <1>;
>  	cs-gpios = <&gpio3 19 0>;
>  	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_ecspi1_1>;
> +	pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_2>;
>  	status = "disabled"; /* pin conflict with WEIM NOR */
>  
>  	flash: m25p80@0 {
> -- 
> 1.7.1
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/