Re: [PATCHv3 5/6] ARM: cubieboard: Enable ethernet (EMAC) supportin dts

[Emilio López]

This is a multi-part message in MIME format.Hi,

El 24/05/13 06:23, Maxime Ripard escribió:
> From: Stefan Roese <sr@xxxxxxx>
> 
> Signed-off-by: Stefan Roese <sr@xxxxxxx>
> ---
>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index b70fe0d..32d9b18 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -27,6 +27,21 @@
>  	};
>  
>  	soc@01c20000 {
> +		emac: ethernet@01c0b000 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&emac_pins_a>;
> +			phy = <&phy0>;
> +			status = "okay";
> +		};
> +
> +		mdio@01c0b080 {
> +			status = "okay";
> +
> +			phy0: ethernet-phy@0 {
> +				reg = <0>;
> +			};

During my testing I found out that I needed to use 1 as reg for the
driver to work. You can find a fixup patch enclosed that changes this;
it's possible that some extra changes may also be needed (s/phy0/phy1/
on the node?)

Cheers,

Emilio